itC RNLL12AR-30012-17 Flexible Light Instruction Manual
- June 4, 2024
- ITC
Table of Contents
itC RNLL12AR-30012-17 Flexible Light
PARTS/TOOLS NEEDED
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
INSTALLATION CONSIDERATIONS
- Unroll the entire length before installing.
- Work the light into the channel going 6” at a time. The light should go into the channel pretty easily by just thumbing it in.
- Do not use any roller as that may cause damage to the LED circuit.
Installation
-
Determine the installation location and install the track by either taping or screwing in place. Install the light in the track by gently rocking it back and forth. Refer to the installation tips above to ensure a successful installation.
-
Wire the light based on the wiring diagram.
Note: Lengths over 200” must be powered from both ends.
-
Please review the considerations below to ensure a successful installation.
RNLL flexible lighting cannot be field cut. Field cutting the light will void the warranty.
Please visit www.itc-us.com for warranty info
3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-
us.com • sales@itc-us.com •
710-00217 • REV A 07/26/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>