DIGITUS DS-55319 Click and Present Mini Wireless Presentation System User Manual

: June 4, 2024
: DIGITUS

Table of Contents

DIGITUS DS-55319 Click and Present Mini Wireless Presentation System
Introduction
Main Features
Package Content
Product Features
Product Specification
Overview
Installation
- Receiver Installation
Transmitter Installation
Pairing Transmitter and Receiver
Streaming
Streaming from smart devices (smartphone/tablet)
Frequency Range & Maximum Transmit Power
Important safety instructions
Disclaimer
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DIGITUS DS-55319 Click and Present Mini Wireless Presentation System

Introduction

With the Wireless Presentation System, you can wirelessly transmit HDMI video and audio signals in Full HD over a distance of up to 50 m with an unobstructed view. Operation and installation are super simple. Real Plug & Play – Just plug in and get started. With additional transmitters (DS-55320), the set can be extended to up to 16 transmitter units (total). Switch to the desired transmitter quickly and easily at the press of a button in order to reproduce your content. You can also share content directly from your mobile device (smartphone/tablet) using your device’s OS directly, no additional app is required. The transmitter and receiver can be supplied with power via your device’s HDMI connection (0.5A required), or alternatively (additionally) with the enclosed Micro USB cable via the USB connection of your notebook, PC, etc. Thanks to the compact design of the transmitter and receiver, installation is easy, quick, and can be customized – the perfect solution for meeting and conference rooms.

Main Features

Wireless HDMI signal transmission up to 50 m (with an unobstructed view)
Supports up to 16x transmitters (sources) + 1x receiver (output device)
Extend this set with up to 16 transmitter units (DS-55320)
Switch to the desired transmitter quickly and easily at the press of a button in order to reproduce your content
Supports sharing from a mobile device (smartphone/tablet) via the OS of the mobile device, no app is required
Supports Windows, iOS, iPad, Android
Supports resolutions up to Full HD (1080p / 60 Hz)
Easy operation and handling thanks to Plug & Play – Just plug in and get started
The transmitter and receiver can be supplied with power via your device’s HDMI connection (> 500 mA required) To have a safe and stable operation, we recommend to use always the Micro USB cable for the power supply of TX and RX

Package Content

1x Transmitter unit
1x Receiver unit
1x Wifi / Power cable (75 cm) for RX
1x Micro USB cable (80 cm) for TX
2x HDMI extension cable (15 cm)
1x QIG

Product Features

Features	Description
Plug and play	Simply connect the transmitter with the PC HDMI ports and

connect the receiver with the screen, the transmitter and receiver will connect

automatically

App Free| The Wireless Presentation System Set doesn’t need any software or app installation, no setup, no IT

team

All in one| Supports also Blu-ray / DVD player, media player and any

device with HDMI jack

Auto Channel Selection| The Wireless Presentation System Set will select the best Wi-Fi channel automatically after power on to ensure streaming

smoothly

Fast Speed with 5G AC MIMO Technology| The Wireless Presentation System Set comes with the fast 802.11ac MIMO technology which increases Wi-Fi speeds by allowing a pair of wireless devices to simultaneously send or receive

multiple data streams

1080p60 High Video Quality| The Wireless Presentation System Set supports 1080p resolution,

which means much more clear

| pictures, rich in details and

texture compared with 720p.

---|---
High Security Protection| No worries about the data security, the Wireless Presentation System Set supports AES 128-bit security encryption and WPA2/WPA- PSK/WPA2-PSK

authentication protocol to protect data. HDCP is supported

to protect the content

Product Specification

Feature

Video Input| 1920×1080 (1080p60/50/30/25/24，

1080i60/50)

1280×720 (720p60/50)

720×576 (576p50)

720×480 (480p60)

Protocol

| WPA2 (WPAS-PSK / WPA2-Enterprise)
Security| AES 128 bit
Platform supported| Windows, macOS, iOS, Android
Distance| About 50 meters in the clear line of

sight

Transmitter

Interface| HDMI in jack x 1, Micro USB x 1, button

x 1

button x 1

Overview

Transmitter Unit

1. HDMI in| Connect source devices, like with a computer or other devices with HDMI, the HDMI in also supports 5V power if the source devices

has HDMI with a 5V output

---|---
2. Button| Short press: start to cast

Long press: long press up to 10

seconds for factory reset

2. LED| To display different statue
3. Micro USB| For power supply

Remark: if the source device has a HDMI with 5V power output, then there is no need to connect an USB cable for power.

LED indicator of the

Transmitter Unit

| Description
---|---
Static red| Transmitter Unit system is

booting on

Flashing red| Transmitter Unit is searching for

Receiver Unit

Flashing blue| Waiting for connection
Static blue| Connected and started to

present

---|---
Purple| No HDMI in

Receiver Unit

1. HDMI out| Connect with monitor or

projector

---|---
2. Button:| Press 10 seconds for factory

reset

2. LED| To display different status
3. Micro USB| For power supply
LED indicator of the

Receiver Unit

| Description
---|---
Flashing blue| Waiting for connection
Static blue| Connected and started to

present

Installation

Receiver Installation

Connect with TV or projector
- Connect the Receiver HDMI Unit with the big screen TV or projectors HDMI jack
- Connect the Micro USB port of the Receiver to the USB port of the TV through the Wifi USB connection/power supply cable.
Connect to Internet
- Connect the Receiver SSID with your smart devices, the SSID and password are shown on the left upper corner of the screen
- Open the browser with your phone, and input the IP address which shows on the left upper corner of the screen to enter to the Receivers management platform
  Remark: when connect to the router, the IP address will be updated accordingly
- Select the network and connect in the management platform, the Receiver Unit will link to the network and show the network SSID on the middle of the screen (to get a better performance, we recommend connecting with 5G router) The platform will list all your wireless router SSID, select the SSID from the wireless router and enter the password. The Receiver Unit will link to the network and show the network SSID on the middle of the receiver screen (to get a better performance, we recommend connecting with 5G router)
Language
- User can change language in the management page
Screen Position
- If the Receiver HDMI out size is not compatible with the display, user can use Screen Position to adjust the zoom in and zoom out of the screen
Streaming mode
- You can select to use streaming or mirror mode

Transmitter Installation

Connect the Transmitters HDMI Unit to PC HDMI port Remark: If the source device HDMI has a 5V power output, then there is no need to connect a USB cable for power. If not, please connect the Transmitter with PC by USB cable for power.
The LED indicator of the Transmitter will turn red when it’s booting up.
The LED indicator will become blue and flashing when it is ready to stream
Click the button to start casting, the LED indicator will become constant blue

Pairing Transmitter and Receiver

A set of the Wireless HDMI Extender Set includes one receiver and one transmitter, which are paired before shipment. Normally you don’t need to pair them again. However, if you buy an additional transmitter, you need to follow the instruction below to pair the new transmitter with the receiver.

Power on receiver and connect with display
Power on the transmitter till the LED turn to flash red, then press the button up to 5 seconds till the LED become fast flashing red, this means the transmitter unit is in factory reset mode.
Wait around 15 seconds, the button light of the Transmitter will turn to constant blue from the red light, and the pair successful message will be displayed on the Receiver Unit screen

Streaming

Streaming from Transmitter

Connect the Transmitter HDMI Unit to a PC HDMI port
Remark: if the source devices HDMI with 5V power output, then there is no need to connect a USB cable for power, if not, please connect the Transmitter Unit with PC by USB cable for power. To have a safe and stable operation, we recommend to use always the Micro USB cable for power supply of TX and RX
The LED indicator of the Transmitter will turn red when it’s booting up
The LED indicator will become blue and flashing when it is ready to stream
Click the button to start casting, the LED indicator will become constant blue

Streaming from smart devices (smartphone/tablet)

Remark: If a HDMI Transmitter (TX) is connected with the HDMI Receiver (RX), please unpair/disconnect the TX and the RX by press the button on TX first, start screen will be shown. Then you can connect a mobile device. Priority is HDMI Transmitter (TX) before mobile device (smartphone/tablet). When a mobile device is connected and you want to switch to HDMI transmitter, just press the button on TX to share. You don’t need to disconnect mobile device first.
IOS Devices:

Search RX (Receiver) SSID and connect in Wifi settings. (SSID: DIGITUS…, Password: 12345678), the is SSID shown on the left upper corner of the RX start screen
Use the screen mirroring function of the smartphone
Choose RX (Receiver) DIGITUS-… to start sharing

Android devices:

Make sure the Wi-Fi of your android device is activated/available
Go to the Mirror/Share/Cast function of the smartphone
Choose RX (Receiver) DIGITUS-… to start sharing

Remark: there are different names on different brands of phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display, MirriorShare, etc.

Frequency Range & Maximum Transmit Power

WiFi Standard: 802.11b/g/n/ac 5G WiFi
Channel: 36, 40
Core Frequency: 5180, 5200
Range: 5170 ~5 210MHz
Bandwidth: 20/40MHz
Transmitter power : 13 dBm max
SW version: RX: 2.69, TX: 2.3.9
HW version:
- TX: S100TX-LC01-01
- RX: S100RX-LC01-01

Important safety instructions

Please read the following safety instructions carefully before installation and operation:

Observe all warnings and instructions concerning this device
Do not expose the device to rain, moisture, vapors or liquids
Do not insert any objects into the device
Do not attempt to repair the unit yourself or open the cabinet. Risk of electric shock!
Ensure adequate ventilation to prevent damage due to overheating
Turn off the power supply and make sure the environment is safe before installation
In the event of thunderstorms, there is a risk of lightning strikes and damage to connected electrical equipment due to overvoltage
Do not install this device during a thunderstorm
Disconnect the device from the connected electrical appliances during a thunderstorm
Use the device inside buildings only
Return the device to your dealer in case of repair
Dust, moisture, vapors, and strong cleaning agents or solvents can damage the device
Disconnect the device from the power supply and the connected devices before cleaning
Clean the device with a lint-free cloth

Disclaimer

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below-mentioned manufacturer address. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany