UNI-T UTE9802 Power Meter User Manual
- June 4, 2024
- UNI-T
Table of Contents
UNI-T UTE9802 Power Meter
Product Specification
IDN?
This query command reads the identification string of the instrument. Return
value example：UTE9802，SN202111051001，V1.12，V0.02
MEAS:VOLT？
Read the measured voltage value. Return value example：220.0V，OL（Out of range,
the same below）
MEAS:CURR？
Read the measured current value. Return value example：5.12A or 500.1mA
MEAS:POW？
Read the measured power value. Return value example：350.02W
MEAS:PF？
Read the measured power factor value. Return value example：0.501
MEAS:FREQ？
Read the measured frequency value. Return value example：50.01Hz
MEAS:ALL？
Read back all measured values at one time: measurement mode, voltage, current,
power, power factor, frequency, separated by commas.
Example： AC,220.1V，5.01A，1103.2W，0.901，49.99Hz
Example： DC,220.1V，5.01A，1103.2W
Example ：RMS,220.1V，5.01A，1103.2W，0.998，49.99Hz
MEAS:MODE？
Read the measurement mode. Return value example：AC，DC，RMS（AC+DC）
SET: MODE XXX
Set the measurement mode. Return value example：SUCCESS，ERR
RANG: VOLT？
Read the voltage range. Return value example：AUTO 、75V、150V、300V、600V
RANG: VOLT XXXX
Set the voltage range. Return value example：SUCC，ERR
RANG: CURR？
Read the current range. Return value example：AUTO 、500mA、2A、8A、20A
CURR XXXX
Set the current range. Return value example：SUCC，ERR
CURR: HIG XXXX
Set the upper limit of current alarm.
Example CURR:HIG 5A. Return value example：SUCC，ERR
CURR: HIG?
Read current alarm upper limit value.
CURR: LOW XXXX
Set the lower limit of current alarm.
Example： CURR: LOW 5A. Return value example：SUCC， ERR
CURR: LOW?
Read the lower limit value of current alarm.
POW:HIG XXXX
Set the upper limit of power alarm.
Example： POW:HIG 5W. Return value example：SUCC， ERR
POW:HIG?
Read the upper limit value of power alarm.
POW:LOW XXXX
Set the lower limit of power alarm.
Example： POW:LOW 5W. Return value example：SUCC，ERR
POW:LOW?
Read the lower limit value of power alarm.
ALAR:DELA?
Read the alarm delay value. Return value example：0.2S
ALAR:DELA XXX
Set the alarm delay value. Return value example：SUCC，ERR
STA?
Read alarm signs, return current and power alarm signs. Separated by commas.
Example：
Return NOR，NOR，Indicates normal.
Return LOW，HIG，Indicates current lower limit alarm and power upper limit
alarm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>