PawHut D1-0237 Elevated Pet Bed Dog Cat Instruction Manual
- June 4, 2024
- PawHut
Table of Contents
PawHut D1-0237 Elevated Pet Bed Dog Cat
Dear Customer
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center. Our contact details are below:
Country| Phone| 
Email
---|---|---
UK| 0044-800-240-4004|
enquiries@mhstar.co.uk
us| 001-877-644-9366|
customerservice@aosom.com
- To keep the bed and cover flat, please adjust the fabric with some force to move into the right position when assembling.
- For step 5-6, please align metal pipes with plastic parts first, then insert the pipes into the plastic parts.
- For step 5, the velcro may not be completely covered. As the cover being used for a period of time, will be a little looser than before, then you could tighten the cover the velcro completely.
- When the cover has been used for a while, you will be able to tighten the velcro.
Parts
Installation Instructions
-
Separate the velcro on the back of cover and insert the metal pipe A into the fabric as illustrated.
-
Insert 2 bed legs B into metal pipe A.
-
Insert 2 metal pipes C into the bed legs B as illustrated.
-
Please repeat step 2 on the other side, then connect 2 bed legs B with 2 metal pipes C.
-
Pull hard over the metal pipe A, then stick the velcro. (see note 3)
-
Turn the pet bed over.
Done
Customer Support
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA MADE IN CHINA
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>