Sharp SPC216 Digital Alarm Clock with USB Ports Instruction Manual
- June 4, 2024
- Sharp
Table of Contents
Sharp SPC216 Digital Alarm Clock with USB Ports
Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference.
Controls
- PM INDICATOR DOT
- USB CHARGING PORT (2 AMP)
- USB CHARGING PORT (2 AMP)
- ALARM INDICATOR DOT
- TIME BUTTON
- ALARM BUTTON
- SNOOZE BUTTON
- HOUR BUTTON
- MINUTE BUTTON
- ALARM ON/OFF BUTTON
- BATTERY DOOR
- AC POWER PLUG
PRODUCT INSTRUCTIONS
Power Supply
- Begin by plugging the power cord into a standard household outlet. The display will flash indicating it needs to be set.
Setting The Time
- Press and hold. the TIME button down to activate the time setting.
- While holding down the TIME button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
- While holding down the TIME button, press the MINUTE button to advance to the correct minute.
- Release the TIME button when the correct time is shown on the display.
Setting The Alarm
- Press and hold the ALARM button down to activate the alarm setting.
- While holding down the ALARM button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
- While holding down the ALARM button, press the MINUTE button to advance to the correct minute.
- Release the ALARM button when the correct alarm time is shown on the display.
Using The Alarm
- Press the ALARM ON/OFF button, the alarm indicator dot will be lit and the alarm will sound at the preset time.
- Press the ALARM ON/OFF button again, the alarm indicator dot will no longer be visible.
- The alarm will sound for 1 minute at the programmed time.
NOTE: The default is set to OFF.
Using The Snooze
- Pressing the S.NOOZE button when the wake-up alarm is sounding will cause the alarm to pause and the alarm will sound again in 9 minutes. This will happen each time when the SNOOZE button is pressed.
USB Charging Function
- Conveniently charge your Smartphones.
- To charge, connect your USB device to the USB port of this alarm.
- Use only with devices that require SV USB power. USB port provides a 2000mA recharging current.
- Devices requiring more than 2000mA should not be used. Charging time may vary for different devices.
NOTE: The charging function may not be supported for all phones or electronic devices. When both of the USB ports are being used, both can provide 2000mA output. The USB power will rise up to 4000mA if only one USB is connected. This device is to be used ONLY for SMARTPHONES. Charging TABLETS and LAPTOPS will void the warranty.
Battery Backup
- Remove the B.ATTERY DOOR and insert 2 new “AAA” batteries (not included) in the direction of the polarity symbols.
- Please make sure the batteries are new and inserted correctly (alkaline batteries are recommended).
- The battery will hold the ALARM and TIME settings if the power is interrupted. There will be no display under battery power and the ALARM will sound at the correct time. If there is no battery and the power is interrupted, the display will flash 12:00 and the ALARM/ TIME will need to be reset.
Care For Your Clock
- The batteries should be replaced if the display or alarm becomes weak or dysfunctional. Store the clock without batteries when not in use. A soft cloth or a paper towel may be used to clean your clock. Do not use any corrosive cleaner or chemical solution on the clock. Keep the clock clean and dry to avoid problems.
Digital Alarm Clock
- This lightning flash and arrowhead within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.
- CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ON BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.- WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
- CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADEEXPOSURE.
Please read this before operating your unit.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Saftey Instructions
- Read these instructions – All the safety and operating instructions should be read before this product is operated.
- Keep these instructions – The safety and operating instructions should be retained for future reference.
- Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
- Follow all instructions – All operating and use instructions should be followed.
- Do not use this apparatus near water – The appliance should not be used near water or moisture -for example, in a wet basement or near a swimming pool, and the like.
- Clean only with dry cloth.
- Do not block any ventilation openings, Install in accordance with the manufacture’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus ( including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip – over.
- Unplug the apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Please keep the unit in a good ventilation environment.
- CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
- WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
- WARNING: All above markings were located on the external enclosure of the apparatus, except for label of Date Code was pasted inside the battery compartment. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
- Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- WARNING: The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
FREQUENTLY ASKED QUESTIONS
What distinguishes the Sharp SPC216 Digital Alarm Clock from other models in terms of display type?
The Sharp SPC216 Digital Alarm Clock features a digital display type, providing clear and easy-to-read time information.
What special feature does the Sharp SPC216 Digital Alarm Clock offer that enhances its functionality?
The Sharp SPC216 Digital Alarm Clock comes equipped with an alarm function, allowing users to set alarms for various purposes.
How compact is the Sharp SPC216 Digital Alarm Clock in terms of its dimensions?
The Sharp SPC216 Digital Alarm Clock measures 5.95 inches in width and 2.3 inches in height, making it compact and suitable for placement on bedside tables or desks.
What are the available power sources for the Sharp SPC216 Digital Alarm Clock?
The Sharp SPC216 Digital Alarm Clock can be powered either by corded electric connection or batteries, providing flexibility in usage.
What is the weight of the Sharp SPC216 Digital Alarm Clock?
The Sharp SPC216 Digital Alarm Clock weighs 0.6 pounds, ensuring lightweight and easy portability.
What type of watch movement mechanism does the Sharp SPC216 Digital Alarm Clock employ?
The Sharp SPC216 Digital Alarm Clock utilizes automatic watch movement, contributing to its accurate timekeeping performance.
In what operation mode does the Sharp SPC216 Digital Alarm Clock function?
The Sharp SPC216 Digital Alarm Clock operates in electrical mode, allowing it to function efficiently with both corded electric and battery power sources.
What is the manufacturer of the Sharp SPC216 Digital Alarm Clock, and what is its retail price?
The Sharp SPC216 Digital Alarm Clock is manufactured by Sharp and is priced at $15.99, offering an affordable option for those seeking a reliable alarm clock with additional features.
Why is my Sharp SPC216 Digital Alarm Clock with USB Ports not displaying the correct time?
The Sharp SPC216 Digital Alarm Clock may not display the correct time if there's an issue with the power source or if the clock needs to be reset. Ensure it's properly connected to a power source or try replacing the batteries. Additionally, reset the clock to see if that resolves the issue.
What should I do if the alarm function on my Sharp SPC216 Digital Alarm Clock with USB Ports is not working?
If the alarm function is not working, check if the alarm settings are correctly configured. Try resetting the alarm or adjusting the volume settings. If the issue persists, consider resetting the clock to its factory settings.
How can I troubleshoot if the digital display on my Sharp SPC216 Digital Alarm Clock with USB Ports is flickering or dim?
Flickering or dim digital display could indicate low battery power. Try replacing the batteries with fresh ones or ensure the clock is properly connected to a power source.
What should I do if the USB ports on my Sharp SPC216 Digital Alarm Clock with USB Ports are not charging my devices?
If the USB ports are not charging devices, check if the clock is properly connected to a power source. Ensure that the USB ports are clean and free from debris, and try using different USB cables or devices to see if the issue lies there.
How do I troubleshoot if my Sharp SPC216 Digital Alarm Clock with USB Ports is not responding to button inputs?
If the clock is not responding to button inputs, try resetting it by removing the batteries or unplugging it from the power source for a few minutes. Then, reinsert the batteries or plug it back in and try again.
What should I do if the alarm on my Sharp SPC216 Digital Alarm Clock with USB Ports is going off at the wrong time?
If the alarm is going off at the wrong time, ensure that the alarm settings are correctly configured. Check if the time and alarm settings match your desired wake-up time, and adjust them accordingly.
How can I troubleshoot if the alarm sound on my Sharp SPC216 Digital Alarm Clock with USB Ports is too low?
If the alarm sound is too low, check if the volume settings are adjusted properly. Some models may have adjustable volume controls, so ensure they are set to the desired level.
DOWNLOAD THE PDF LINK:Sharp SPC216 Digital Alarm Clock with USB Ports Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>