bamix BXCLPRWH Cordless Hand Blender User Manual

: June 4, 2024
: bamix

bamix BXCLPRWH Cordless Hand Blender

bamix-PRO-Cordless-Hand-Blender

Product Overview

bamix-PRO-Cordless-Hand-Blender-1

Instructions

bamix-PRO-Cordless-Hand-Blender-2 bamix-PRO-
Cordless-Hand-Blender-3

Dear customer
We congratulate you on buying the bamix® universal kitchen appli-ance. bamix® has proved its worth a thousand times over and has satisfied users on all five continents. It is ideal for the daily chores, small and not-so-small, which occur in the kitchen.
bamix® is handy because its grip is specially designed to fit the hand and it is easy to switch on. It is no trouble even for small hands to use and is also suitable for left-handers. bamix® is a Swiss quality product of which we have been proud since 1954.

For your safety
Please read these instructions before switching on your appliance.
This manual can be downloaded in full at www.bamix.com.

The appliance may only be used for its intended purpose, the preparation of food.
All claims and liability will be rejected for operations that have nothing to do with food preparation.

Before using your bamix®

Please read all the information given in these instructions for use very carefully. It gives you important tips about the use, the safety and the care of the appliance. Keep these instructions in a safe place and pass them on to the next user. The appliance may only be used for the intended purpose according to these instructions for use.

Hints and tips for:

Care
Recipes
Assembling
Accessories

Download at: www.bamix.com

Explanation of safety symbols

This symbol indicates dangers that could cause serious or even life-threatening injuries if you do not follow the instructions!
This symbol is used for additional information to the safety instructions.

Intended use

This appliance may only be used for the preparation of food. Any other use of the appliance can be dangerous and may lead to serious or severe injuries. In the case of improper use or incorrect operation, the manufacturer›s liability and warranty shall be void. Also see “Manufacturer’s warranty” (page 34)!

Restriction of operators

This appliance may only be operated by persons who are familiar with the con-tents of these operating instructions and have the necessary physical, sensory or mental faculties. Persons under the influence of alcohol or medication or persons who do not possess the necessary faculties are only allowed to use the appliance under supervision.
This appliance is not intended for use by children. The appliance and its connect-ing cable, attachments (blades are sharpened!) as well as packaging materials/adhesive tapes (risk of suffocation) must be kept away from children.
This appliance may be used by children of 8 years and older and by persons with limited physical, sensory or mental faculties or with a lack of experience and/or knowledge, if they are supervised or have been instructed in the safe use of the appliance and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.

Operating instructions

In order to avoid injury or damage to the appliance during operation, it is imperative that you observe the following safety instructions:

Only connect the charger to alternating current, with voltage according to the type plate on the appliance.
An electrical appliance is not a children‘s toy. Children do not recognise the dan-gers associated with electrical appliances. Therefore, keep the appliance out of reach of children.
The appliance may only be immersed in liquids up to the level of the separation between housing and handle (marking 1).
Remove the battery when replacing the attachments!
Only switch on the appliance when the mixer is placed in the receptacle.
Route the charger cable so that it does not come into contact with hot or sharp-edged objects and so that no one can trip over it! Do not bend it, place heavy ob-jects on it or wrap it around the appliance. Do not let the mains cable hang down over the edge of the work surface.
The battery must not come into contact with heat, fire or dirt.
Only use the charger, charger cable and accessories supplied with the appliance. The appliance may only be operated with genuine parts and accessories.
Only work with the hand blender when it is in a receptacle with a flat bottom.
Improper handling of electricity can have fatal consequences!
Never bring the live parts into contact with water.
Never immerse the complete hand blender, the battery, the charger or the charg-er cable in water or other liquids.
Never expose the appliance to rain or other intense moisture. If the charger (with or without the hand blender) does fall into water, first unplug the charger cable from the socket with dry hands and then remove the appliance from the water. Remove the battery pack from the blender handle and have the entire appliance checked by an authorised service point before using it again.
Do not operate the appliance with wet hands. Do not use it when it is damp or wet or when you are standing on damp ground.
The hand blender and the charger must not be cleaned in the dishwasher.
To switch off the blender completely in the event of a mal-function, you can pull out the battery pack by pressing the two release flaps (on the left and right of the handle top) at the same time. This requires some force. The appliance is now without power. By putting the battery back in again, you can repeat the switch-on procedure. This procedure must also be carried out when changing the battery (at the end of the battery life). Please follow the instructions in the chap-ters “Changing of the battery” (page 30) and “Disposal of the battery” (page 30).
In the event of a charger malfunction, always unplug the charger cable from the socket. Always pull on the plug and not on the cable.
In the event of damage to parts of the appliance, stop operation immediately in order to avoid hazards. Have the complete appliance checked by an authorised service point before putting it back into operation.
If the mains adapter or the charger is damaged, the charger must be replaced with a genuine charger, which can be obtained from the manufacturer or its national customer service. See “Service, repairs and spare parts” (page 31).
Food can splash during processing. Therefore, let hot food cool down before pro-cessing to avoid scalding.
Take the saucepan off the heat when using the hand blender in the saucepan.

Explosion hazard!
Protect the battery from heat and fire. Do not operate the appliance in spaces with explosive or flammable substances or liquids.

Location of the hand blender
Choose a dry location with enough working space for the hand blender and make sure that it is out of the reach of children. Make sure that nothing can fall on the ap-pliance and that the appliance itself cannot fall down. Never place the appliance near devices that radiate heat, such as ovens, gas cookers, hotplates, etc.

Description of functions

The battery-powered hand blender can be used to chop, mince, purée, whip, fluff, stir, mix or cut solid and liquid foods.
The hand blender comes equipped with the multi-purpose blade, the whisk and the beater. Optionally, the range can be extended with the meat and vegetable mincer. You will find detailed information on possible uses under “Attachments, accessories and their operation” (page 33) or in the full version of the manual / FULL INSTRUC-TION MANUAL at www.bamix.com, where information on preparation quantities is also given.
The hand blender has 3 speed settings. An overload protection with automatic safety switch-off will be automatically activated in the following situations:

Overheating
Blade blockage
Continuous operation over 5 min.

Operation

Preparation

Carefully remove the hand blender and all accessories from the packaging.
Remove all packaging components and keep the complete packaging.
Clean the hand blender and its accessories before they come into contact with food. See “Cleaning and care” (page 28).

Setting up the hand blender and electrical preparation

Plug the charger cable into the base of the charger, then in-sert the cable into the slot provided and pull the cable out-wards.
Attention: only cable duct 2 may be used!
Place the charger (fig. 2) on a flat, non-slip surface in the im-mediate vicinity of a mains outlet.
Insert the plug into the mains socket.
Place the hand blender in the charger until the battery is fully charged. Upon deliv-ery, the battery is only partially charged.

LED display (charging and working)

LED display: blender is in the charger

1–4 LEDs flashing ascending = battery in charging mode
4 LEDs lit briefly when placed on charger = battery charged and ready for use

LED display: switching on the blender (blender is not in the charger)

While the large multifunction button is pressed (1-2 seconds), a blue light appears as confirmation for the switch-on mode. At the same time, the 4 LEDs indicate the battery charge level. After releasing the large multifunction button, the LEDs of the charge level indicators go out and only the large multifunction button lights up. As long as the multifunction button is lit, work can be done. If the button is unlit, see further down in this chap-ter, “LED display without light”. When the multifunction button is pressed, the current charge status lights up for 1 second.

4 LEDs lit = full battery charge for approx. 20 minutes
3 LEDs lit = ¾ battery charge for ≥ 15 minutes operating time
2 LEDs lit = ½ battery charge for ≥ 7 minutes operating time
1 LEDs lit = ¼ battery charge for ≤ 7 minutes operating time
Recommendation: charge the battery

LED display: blender in operation
The large multifunction button lights up permanently in blue. Note: The blender will switch itself off after 60 seconds if not used. See “LED display without LED light”.

LED display: without LED light
The LED display of the hand blender has a switch-off function (sleep function) that activates after 60 seconds of non-use and puts the hand blender into sleep mode. By pressing the large ON button once, the appliance is reawakened and is ready to work. This sleep function has been built in to allow longer operation time and also to prolong the battery life.

Operation of the bamix® cordless hand blender

Before you can work with the appliance, you need to affix an attachment.
CAUTION! Risk of injury when affixing and replacing attachments. For a detailed description, see “Affixing and replacing attachments” (page 33).
The blades of the attachments are very sharp! CAUTION, risk of injury! Do not use your hand to remove pieces that block the blade! Use a blunt object (e.g. a wooden or plastic handle) for this purpose.

Fill a flat-bottomed receptacle or a bamix® blender jug (see www.bamix.com). Do not switch on the hand blender until it is in the receptacle.
With coated receptacles, take care not to damage the coating. For further instruc-tions on applications of attachments such as mixing, puréeing, whisking, etc., please see www.bamix.com.
Note: To protect the hand blender from being overloaded, it will switch off automatically in the event of overheating or blade blockage. The hand blender can then be switched on again and used.

If desired, change the speed by pressing buttons 1 and/or 2:

Speed 1 (button 1) low speed
Speed 2 (button 2) high speed

Booster (button 1 & 2 pressed simultaneously) max. speed

Type bamix® cordless bamix® cordless PLUS bamix® cordless PRO

Speed 1 in rpm 8000 8000 8000
Speed 2 in rpm 13000 14000 14000
Booster in rpm – 15000 15000
Weight 665 g 665 g 700 g
Dimensions in mm 65x65x360 65x65x360 65x65x410
Output length in mm 140 140 190

Cleaning and care

Note: Always remove the battery from the cordless hand blender before cleaning (fig. 6)! Detailed information on the cleaning and care of the bamix® hand blender can be found in the full version of the user manual FULL INSTRUCTION MANUAL at: www.bamix.com.

Do not use abrasive cleaners, aggressive liquids, sponges with rough surfaces or hard brushes.
Do not put the appliance in the dishwasher. This would damage the blender! Only clean the appliance with a damp cloth.
Do not leave the blending shaft in liquids for a long time as this could lead to dis-colouration.

Operating of the battery

WARNING : Explosive gases. Avoid flames and sparks. Ensure ade-quate ventilation when charging.
CAUTION! RISK OF INJURY IN CASE OF IMPROPER HANDLING OF BATTERIES!

Rechargeable batteries must be handled with special care.

To maximise battery life, place the hand blender in the charger after each use.
Only use original batteries. Do not place non-rechargeable batteries in the charger; they are not rechargeable!
Do not throw the rechargeable batteries into a fire or expose them to high temper-atures. There is a risk of explosion.
Only use undamaged rechargeable batteries.
Never expose batteries or charger to direct sunlight or moisture.
Never short-circuit batteries. The battery may burn out due to overheating caused by a short circuit.
Never open a battery. Liquid that leaks out when used incorrectly can cause skin irritation. Avoid contact with the liquid. In case of contact, rinse off the liquid im-mediately. If the liquid gets into the eyes, immediately flush the eyes with water for 10 minutes and seek medical attention without delay.
NOTE! REDUCED BATTERY LIFE IF IMPROPERLY HANDLED! Improper handling can reduce the performance of the batteries.
Only use the original charger. Other charging devices may destroy the battery.
Disconnect the charger from the power supply if it is not going to be used for a long period of time.
Remove the battery from the charger when the charger is not connected to the power supply.
Never insert other objects into the opening of the charger or into the battery port of the appliance.
Replace batteries that can no longer be charged. They will damage the charger.

Improper handling of electricity can have fatal consequences, cause short circuits, fire or electric shock! Never use a defective charging cable. In the event of any dam-age, it must be replaced with a special connecting cable, which is available either from the manufacturer or its after-sales service; please contact the bamix® repair service.
If the hand blender is switched on and the button is pressed, the number of lit LEDs on the LED display indicates the charg-ing status of the hand blender for 1 second. Note: Do not switch on the hand blender when the battery is empty. Otherwise, the battery may be damaged.
Place the hand blender in the charger by positioning it at an angle and then swivelling it to the horizontal position. When the hand blender is correctly connected to the charger, the LED lights of the LED display will flash. The number of flashing LED lights indicates the charging status. The battery is fully charged when no more LED lights are lit. You can also charge the battery without the hand blender in the charger. For more information on the charge level indicator, see the chapter “LED display (charging and working)” on page 26.

Storing of the appliance and the battery

Note: Keep the appliance and its accessories out of the reach of children. If the appliance is to be stored for a longer period of time (without use), fully charge the battery beforehand. Otherwise, the battery may be damaged.
Always disconnect the charger from the mains for a longer storage period! The charger is only disconnected from the mains when you pull the plug out of the sock-et. Check the cable regularly for damage! A damaged device or cable must no longer be put into operation! Never pull the plug out of the socket by the pulling the charger cable or with wet hands!

Replacing the battery
You can pull out the battery pack by pressing the two release flaps (on the left and right of the handle top, fig. 6) at the same time. This requires some force. The appli-ance is now without power. By putting the battery back in again, you can repeat the switch-on procedure. This procedure must also be carried out when changing the battery (at the end of the battery life). Please also refer to the chapter “Disposal of the battery” (page 30).

Recycling

Disposal of the battery
This product must not be disposed of with normal household waste at the end of its life. It must be taken to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, on the instructions for use or on the packaging indicates this. Please also note the information under “Technical data” (page 32).
The materials are recyclable according to their labelling. With the reuse, recycling or other forms of reutilisation of old appliances, you are making an important contribu-tion to the protection of our environment.

Dispose of the old battery in accordance with local and national regulations and hand it in at a battery collection point.
Even completely discharged batteries contain residual energy. To avoid a short circuit, insulate the poles, for example with insulating tape!

REACH DIRECTIVE: See www.bamix.com

Recycling of your hand blender

Remove the battery according to the chapter “Replacing the battery” (page 30).
Dispose of the hand blender correctly at the local collection point (first ask wheth-er the appliance can be repaired).
Dispose of the battery according to the instructions “Disposal of the battery” (page 30).

Service, repairs and spare parts
Your appliance complies with the relevant safety regulations for household electrical appliances. In case of repair, contact the bamix® customer service. This ensures that defects and faults will be rectified professionally and quickly.
All repairs must be performed by qualified technicians. Considerable danger may arise for the user through repairs carried out by unauthorised persons. If the appli-ance is used for purposes other than those for which it is intended, or if it is incorrect-ly operated or repaired by unqualified persons, the manufacturer shall not be liable for damages. In such a case, the warranty shall become void.
Within the warranty period, please always enclose the receipt. Only use genuine spare parts. The use of incorrect accessories can lead to injuries or damage to the appliance! No bamix® parts may be misused or used in combination with a competi-tor’s product! Indicate the information printed or embossed on the type plate.

Country-specific service points
Switzerland: online@bamix.ch
https://www.bamix.com/ch_de
Germany: service@unold.de
https://www.unold.de/
Other country-specific service points can be found at: https://www.bamix.com/ch_de/service

Technical data (for power indications please see product overview)

Mechanical and electrical safety

IEC 60335-2-14:2016+AMD1:2019
IEC 60335-2-29:2016+AMD1:2019
IEC 60335-1:2010+AMD1:2013+AMD2:2016
EN 60335-2-14:2006+A1:2008+A11:2012+ A12:2016
EN 60335-2-29:2004+A2:2010+A11:2018
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019 EN 62233:2008
EN 55014-1:2006/A1:2009/A2:2011
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55014-2:1997/A1:2001/A2:2008

Directives and standards

2014/35/EU LVD
2014/30/EU EMC
2011/65/EU RoHS
2009/125/EG Framework Directive
10/2011/EU PIM
94/62/EG Packing
2012/19/EU WEEE
1935/2004 EG FMC

Insulation Switch Intermittent operation Materials

Double insulation
Safety switch with pulse contact
max. 5 minutes at a time
All parts are made from rust-free, odourless and tasteless materials that are resistant to corrosive foodstuffs.

Food contactwww.tuev-sued.de/ps-zert

Materials

We herewith certify that this product and its attachments and accessories conform to the European Commission Regulation No. 10/2011 on food contact materials. It complies to all relevant statutory limits.

Disposal

This product conforms to the European Directive 2012/19/EC on waste electrical and electronic equipment – WEEE. This Directive governs the disposal and recycling of such equipment within the EU. For disposal instructions, please contact your dealer or local authorities.

Manufacturer

ESGE AG, Hauptstrasse 21, CH-9517 Mettlen/Schweiz Made in Switzerland All information in this document is subject to change without prior notice. The above information might vary from country to country.
www.bamix.com

Attachments, accessories and their operation

Detailed information on attachments and other accessories (not included in the scope of delivery) as well as their use (chopping, mincing, puréeing, beating, fluffing, stirring, mixing, slicing) can be found in the instructions for use FULL INSTRUCTION MANUAL at www.bamix.com

Affixing and changing attachments

Risk of injury! There is a risk of injury from sharp edges/blades and rotating parts on all attachments! Always keep hair, clothing, fingers etc. away from the attachments when working. Always wait until the rotating parts have come to a complete stop before touching them! This warning applies to all attachments!

If you take a closer look at the attachments, you will see a re-cess.
The drive shaft stub of the bamix® is equipped with a drive pin.
Always remove the battery before changing attachments. Push the attachment as straight as possible onto the stub so that the drive pin engages in the recess on the attachment. Please make sure that the attachment is exactly parallel to the cutter guard and properly aligned with the stub.
To remove the attachment, first remove the battery, then just pull it from the stub. If the attachment cannot be easily pulled off, loosen it by placing the bamix® in hot dish-washing water and switching the appliance on briefly. Remove the battery again and pull off the attachment. If necessary, lever it off with a suitable implement (e.g. screwdriver).