CONNECT CSH-LTVSY-279 Smart TV Backlight LED Strip User Manual

CONNECT CSH-LTVSY-279 Smart TV Backlight LED Strip

Specifications

• Power adaptor:
  • Input: AC 100-240V 50/60Hz
  • Output: DC 24V 2A (max.)
• Dimensions of the control box: L194W163H68mm
• Length of the light strip: 6m (suitable for up to 85″ TV)
• Length of the HDMI cable: 1m
• Wi-Fi Standard: 802.11 b/g/n
• Wi-Fi Frequency: 2.4GHz
• HDMI capabilities: 3840×2160@60Hz; HDMI2.0; HDCP2.2; CEC

Product Usage Instructions

Installation

INDOOR USE ONLY

1. Clean the back of the TV to ensure it is free of dust and water.
2. Match the red arrow on the LED strip to the color of the TV.
3. Connect the power adapter to a power source.
4. Press the Power button on the backlight box to turn on the lights.

Connect with the App

1. Download and install the app.
2. Register or login to the app.
3. Adjust app settings as recommended.
4. Enable Bluetooth and Wi-Fi on your smartphone, connected to a 2.4GHz Wi-Fi access point.
5. Connect the lights to the app. If not flashing, hold down the power button until it blinks rapidly to enter pairing mode.
6. Control and customize the lights using the app.
7. To remove the light strip from the app, follow the app’s instructions.

FAQ

Why is my light strip not appearing on the app?
If your light strip does not appear on the app, it may be due to dual-band Wi- Fi networks. Check your router settings and ensure that the SSID for each band (2.4GHz and 5GHz) is distinct. You may need to configure each band individually by changing the SSID names.

Warnings and Cautions

• For indoor use only.
• Ensure back of the TV is free of dust and water before installing.
• Use the backlight box in a dry and ventilated place, away from damp or humid environments.
• The control box may get hot after prolonged use.
• Unplug the power adapter if not in use for an extended period.
• This product is not a children’s toy. Adult supervision is recommended.

User Manual
AmbiColour Smart TV Backlight LED Strip CSH-LTVSY-279

WHAT’S IN THE BOX

• TV backlight box
• 6m LED light strip
• 1m HDMI cable
• Power adaptor
• User manual

What you will need:

• TV
• External device with HDMI output
• Smartphone or tablet with Bluetooth and connected to 2.4GHz band Wi-Fi network
• Password for the Wi-Fi network

OVERVIEW

1. Power button
2. Wi-Fi connection status indicator
3. HDMI In
4. HDMI Out
5. USB port for light strip
6. Power input
7. Microphone (on the front panel)

INSTALLATION

INDOOR USE ONLY

1. Install the light strip on the back of the TV in a clockwise direction.
2. Suitable for up to 85” TV
3. Installation start point must be at the location of the red arrow to match the colour of the TV
4. Ensure back of the TV is free of dust and water before installing.
5. Connect cables. Plug in:
6. An HDMI cable from the external device (gaming console, set top box, DVD/Blu-Ray player) to the HDMI IN port on the backlight box.
7. One end of the supplied HDMI cable to the HDMI OUT port of the backlight box; plug in the other end to the TV.
8. The USB jack on the light strip to the LIGHT BELT port.
9. Connect the power adapter to a power source and press the Power button on the backlight box to turn on the lights.

CONNECT WITH THE APP

1. Get the app.
2. Register or login to app.
3. Recommended app settings.
4. Turn on Bluetooth and Wi-Fi on your smartphone. Make sure you are connected to a 2.4GHz Wi-Fi access point.
5. Connecting lights to app.
6. Using lights with the app.
7. Removing light strip from the app.

TROUBLESHOOTING

• THE LIGHT STRIP DOES NOT APPEAR ON THE APP:
  • If the lights are not blinking rapidly, hold down the power button until the lights flash rapidly to reset it.
  • Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
  • Ensure that the Wi-Fi signal is strong at the installation point.
  • Make sure you are connected to a 2.4GHz Wi-Fi network.
• Most modems/routers support both 2.4GHz and 5GHz bands and may use the same Wi-Fi network name (SSID) for both bands. Log into the router’s settings and check:
  • Is 2.4GHz band enabled?
  • If both 2.4GHz and 5GHz bands are using the same SSID, find the settings that allow you to separate the 2.4GHz and 5GHz bands. Usually, there will be an option to configure each band individually. Change the SSID for one or both bands to make them distinct. For instance, “NetworkName_2.4GHz” and “NetworkName_5GHz”.
• If you are using Telstra Smart Modem, refer to the following guide to resolve band steering issues: https://www.laserco.com.au/Telstra-NBN-Gen-Smart-Modem-Fix

WARNINGS AND CAUTIONS

1. For indoor use only.
2. Ensure back of the TV is free of dust and water before installing.
3. Use the backlight box in a dry and ventilated place, away from damp or humid environments.
4. It is normal for the control box to get hot after a few hours of operations.
5. If not being used for an extended period of time, make sure to unplug the power adapter.
6. This product is not a children’s toy. Adult supervision is recommended.

SPECIFICATIONS

Power adaptor| Input: AC 100-240V 50/60Hz
Output: DC 24V 2A (max.)
---|---
Dimensions of the control box| L194W163H68mm
Length of the light strip| 6m (suitable for up to 85” TV)
Length of the HDMI cable| 1m
Wi-Fi Standard| 802.11 b/g/n
Wi-Fi Frequency| 2.4GHz
HDMI capabilities| 3840×2160@60Hz; HDMI2.0; HDCP2.2; CEC

Visit our website
www.connectsmarthome.com.au

References

• Home - Connect SmartHome
• Laser: The Ultimate Tech Hub for Home Entertainment, Audio, ...

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>