HOMCOM IN231000231V01_GL Two Seater Sofa Instruction Manual
- June 4, 2024
- HOMCOM
Table of Contents
HOMCOM IN231000231V01_GL Two Seater Sofa
Product Specifications
- Model: IN231000231V01_GL
- Part Number: 839-076V73
- Product Type: Hardware Kit
- Compatible with: Chairs, Sofas, and Armchairs
Product Usage Instructions
Warnings
Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to a bad installation or withering. If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Assembly Steps
- Identify all components in the hardware kit.
- Follow the provided diagrams to ensure correct placement of each part.
- Use the appropriate tools to securely fasten all parts together.
- Check for stability and make any necessary adjustments before use.
FAQ
Q: Can this hardware kit be used for other furniture types?
A: This hardware kit is specifically designed for use with chairs, sofas, and armchairs. It is not recommended for other furniture types.
Q: Are additional tools required for assembly?
A: Basic tools may be required for assembly such as screwdrivers or wrenches. Refer to the provided instructions for specific tool requirements.
Q: Is it safe to disassemble and reassemble the furniture after initial assembly?
A: It is recommended to avoid frequent disassembly and reassembly to maintain the structural integrity of the furniture. If necessary, follow the provided instructions carefully to avoid any damage.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.
Our contact details are below:
Country
UK
phone
0044-800-240-4004
Email
customerservice@aosom.ca
PACKING DETAILS:TOTAL 2 BOXES
Chairs, Sofas and Armchairs
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Only for domestic use
Instruc ons for use:
- Put the chair stably on a flat floor.
- Building the chairs in good condition.
- Stay away from open flames.
- Avoid the overload at the chair.
Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Regularly remove leaves and/ or water collected on the canvas.
- Check the seating regularly.
Storage conditions:
The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Beware of crushing and cu ng hazards during assembly.
The manufacturer declines all responsibility in case of damages due to a bad
installa on or withering.
If the sea ng is fi ed with powered seat height adjustments, only trained
personnel may replace or repair those components.
PARTS LIST
ISNATALLATION
