ListenTALK LA-482 Docking Station User Guide
- June 4, 2024
- ListenTALK
Table of Contents
**Listen TALK LA-482 Docking Station User Guide
**
Introduction
Thank you for purchasing a docking station! Please reference this guide to
use ListenTALK transceivers and receivers with this product. For
ListenWIFI products, please reference the Docking Station using ListenWIFI
Quick Start Guide.
The docking station allows for easy charging and management of ListenTALK
transceivers and receivers. This guide provides an overview of the docking
station and does not include all features or options. For complete details on
care and use, please visit the ListenTech.com website to download the
ListenTALK user manual.
Docking Station 4 LA-482
Docking Station 16 LA-480
Docking Station Case 16 LA-481
Visit : the ListenTech.com website to order accessories.
Setup and Charging
-
Place the docking station on a flat surface or counter where receivers are easily accessible.
Alternatively, the docking station can be mounted to a wall or other surface using the wall mounting slots (LA-480 and LA-482). -
Connect the docking station to a power outlet using the provided power supply.
-
Insert your ListenTALK transceivers and receivers into the charging pockets of the docking station.
The receiver(s) top LED status will begin flashing to indicate the battery is charging and turn solid when fully charged.
Note: Do not close the docking station case when connected to power! The case must remain open to ensure proper ventilation while charging (LA-481).
Create a Group with Docking Station
Create a leader and optional sub-leader(s) by inserting red leader clips onto
transceivers. Place the leader into the red leader pocket. Place other
transceivers and receivers into participant pockets.
Pairing Button – Create a ListenTALK group by momentarily pressing the
docking station pairing button. The pairing indicator will flash during
pairing, then turn solid momentarily and finally extinguish when the pairing
process is completed successfully. Create multiple, independent ListenTALK
groups by repeating this process with additional units.
Note: Each ListenTALK group is independent and communication is secured
by a unique pair key.
New Pair Key – To create a new pair key, insert leader into leader pocket and other transceivers into participant pockets in the docking station. Press and hold the pairing button for five seconds. The pairing and status indicators will flash momentarily, turn solid, and then extinguish indicating success.
Leader Clip Storage
Leader clips are only required for leader and sub-leader transceivers. Remove leader clips from participant transceivers and place them in the docking station leader clip storage slots for future use.
ListenTALK Status
Status Button – Press and hold the docking station status button to illuminate the tranceiver graphic displays for group identification and other tranceiver information.
LA-382 Intelligent Cable Management Unit
A cable management unit is available for conveniently storing headsets, headphones, neck loops, and other accessories (available for LA-480 only).
User Check-Out
Docking Station Pockets – Place a credit-card sized I.D. in the docking
station pocket to identify the person currently using that specific ListenTALK
Transceiver.
ListenTALK Software Suite – Use check-out mode to identify the person
currently using a specific ListenTALK Transceiver.
Programming
Connect a Windows® PC to the docking station USB port. Download and install the ListenTALK Software from www.listentalk.com/support. For software operation details, consult the software help files.
Docking Station – Top and Bottom
LISTEN TECHNOLOGIES 14912 Heritage Crest Way, Bluffdale, Utah 84065-4818 USA
Phone: +1.801.233.8992
Toll-Free: 1.800.330.0891
www.listentech.com
Windows® is a trademark of the Microsoft group of companies.
Copyright © 1998 – 2023 Listen Technologies Corporation. All rights reserved.
20230807.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>