GALLAGHER 701028 TurboStar Tape Isolator Fences Instruction Manual
- June 4, 2024
- GALLAGHER
Table of Contents
GALLAGHER 701028 TurboStar Tape Isolator Fences
INSTALLATION
- Position the tape insulator against the post.
- Insert the locking pin through the insulator, ensuring it fits securely.
- Wrap the conductive tape around the insulator’s roller.
- Secure the conductive tape by closing the insulator’s clip over it.
STRAINING
- Place the straining tool against the conductive tape and insulator.
- Pull the conductive tape through the insulator to achieve the desired tension.
- Use the straining tool handle to tighten the tape until taut.
PLATE CONFIGURATIONS
- Attach the mounting plate to the post with the conductive tape running through the insulator.
- Place the insulator onto the mounting plate and secure it with screws.
- Install a tensioning spring on the conductive tape if required for optimal performance.
Specifications
| Specification | Detail |
|---|---|
| Part Number | 701028 |
| Product Type | Tape Insulator |
| Brand | Gallagher |
FAQ
How do I install the tape insulator on a post?
Follow the INSTALLATION steps: position the insulator, insert the locking pin, wrap the conductive tape, and secure it with the clip.
What is the purpose of the straining process?
The straining process is used to pull the conductive tape through the insulator to the desired tension and then secure it.
Are there different plate configurations for the insulator?
Yes, the insulator can be mounted onto a plate attached to the post, and a tensioning spring can be added if needed.
What is the part number for this tape insulator?
The part number for this tape insulator is 701028.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>