How to Install our Pre Drilled Glass Bathroom Splashbacks User Manual

June 3, 2024
SPLASHBACK

Splashbacks-LOGO

How to Install our Pre Drilled Glass Bathroom Splashbacks

How-to-Install-our-Pre-Drilled-Glass-Bathroom-PRODUCT

What you need

How-to-Install-our-Pre-Drilled-Glass-Bathroom-FIG-1

Before you start

  1. Check that your splashback fits the space. This will depend on size of splashback ordered and your preferred orientation
  2. Leave as much space as possible between your splashback and the nearest water source
  3. Check the surface is perfectly flat, non-porous, dry and dust free.
    Do not cut:
    Our splashback are made from high quality toughened glass so cannot be cut

How-to-Install-our-Pre-Drilled-Glass-Bathroom-FIG-2

Easy to apply

  1. Mark & drill holes
    Decide where you want to position your splashback, then carefully and accurately mark where the drill holes need to be. Select the correct sized drill bit and determine depth of hole required. Once drilling is complete, insert wall plugs firmly into holes.

  2. Fix on the wall
    Place the bottom edge of the splashback to the rear of the sink or vanity unit lining up the pre-drilled holes with those on the wall. Insert the screws, fix to the wall and cover screw heads with decorative caps (supplied).

  3. Seal the edges
    Use the Clear Silicone Sealant to seal around all four sides of the splashback. Take care to ensure that the sealant is no more than 2.5mm in thickness.How-to-Install-our-Pre-Drilled-Glass-Bathroom-
FIG-3

Health & Safety

SAFE HANDLING OF GLASS
We recommend that glass splashbacks are handled with care and that eye protection and suitable gloves should be worn. We advise that the product is brought to room temperature over a period of 24 hours if it has been subject to very hot or cold conditions beforehand.

IMPORTANT
Unfitted glass is fragile. Do not place on hard surfaces prior to fitting. Special care should be taken with the corners of the product as impact will cause the glass to shatter.

Aftercare

  1. Simply use hot water and a mild soap detergent to clean the glass splashback. Do not use abrasive cleaners.
  2. Ensure the splashback is cool to the touch before wiping as in extreme cases applying a cold cloth to a very warm/hot surface can cause the glass to crack/shatter.

Guarantee

All our glass splashbacks are guaranteed for 5yrs. For more information, visit www.splashback.co.uk/terms.htm

Thank you for purchasing this splash back. We’d love to see your transformation. Why not take a photo of the space before and another once your splashback is in place, post on Instagram, and tag us @splashbackuk For further information and inspiration, visit our website SPLASHBACK.CO.UK

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SPLASHBACK User Manuals

Related Manuals