Blue Octave Home BDW52 in Wall Speakers user Guide
- June 3, 2024
- blue octave home
Table of Contents
Blue Octave Home BDW52 in Wall Speakers
Specification
- BRAND: Blue Octave Home
- MODEL NAME: In Wall Speakers 2 Way Home Theater Surround Sound Pair
- SPEAKER TYPE: Surround Sound, Multi-Room, Outdoor
- CONNECTIVITY TECHNOLOGY: Bluetooth
- RECOMMENDED USES FOR PRODUCT: Home Theater
- FREQUENCY RESPONSE: 38Hz-25 kHz
- IMPEDANCE: 8ohm
- EFFICIENCY: 95dB
- POWER: 280 watts
- PRODUCT DIMENSIONS: 54 x 3 x 10.98 inches
- ITEM WEIGHT: 25 pounds
Introduction
High quality audio is essential in today’s HD entertainment world to produce a rich and beautiful listening experience, and that is what the Brilliance Series is all about. These models, which are at the top of the Blue Octave product line, have an expanded frequency range and maximum power handling. The ideal option for your family room, home theatre, or any other room where excellent sound is essential! For new construction or existing walls, these Blue Octave Home audio speakers have a one-cut simple installation.
The wall-lock mounting method on the integrated frame ensures a stable, vibration-free installation, while butyl rubber surrounds boost performance and durability. Spring loaded terminals for simple connecting and paintable frames and grills are further features. For seamless connection with other models, these speakers have been timbre-matched to all other Blue Octave speakers. Upgrades are simple thanks to provided templates and shared cut out sizes. weatherproof design. created and developed in the USA!
HOW IN-WALL SPEAKERS WORK
In-wall speakers only affect the quality of the sound in one way: their restricted depth and width limit the cabinet’s volume to that which can be adjusted by adjusting the enclosure’s height. Even some in-wall speakers use “infinite baffle” designs, in which the wall acts as the speaker box.
HOW TO KNOW IF WALL SPEAKERS WORK
Lightly contact the speaker wire to the battery using a battery and the other end of the wire. A positive sign is when you hear noise. Check to see whether everything is connected correctly before trying again with a different cable if you can’t hear anything.
HOW TO CONNECT TO TV
Use an RCA jack on the speaker end and a 3.5mm audio jack on the TV end. You can utilize a 3.5mm to 3.5mm cable if your speakers’ input interface is also 3.5mm (rather than RCA connectors).
FAQs
How deep a foundation must be for installation?****
should contain 5 “at the least. The speaker is just about 1/4 in size “If it is any shorter than that, the speaker wires exit the back in a straight line.
Is an amp necessary?****
You do indeed need an amplifier for this.
Do I need the ceiling mount to use the speaker?****
Yes. Although the speaker can be unscrewed from the ceiling mount, I haven’t tried it because there might be adhesive sealing the speaker’s rim.
If you install in-wall speakers, do you remove the insulation first?****
By putting the speaker into the hole with the back first and removing the section of insulation, you can check the size of the hole. Shave the area around the outline if the hole is too small, then retest. Install your speaker as normal.
How much depth do in-wall speakers require?****
For optimal installation, most in-wall speakers need 3 12″ of depth and most in-ceiling speakers need 5″ or more behind the drywall, but make sure to check the speaker’s requirements first.
Are receivers required for in-wall speakers?****
Speakers installed in walls and ceilings are typically passive speakers. They are thus not required to be connected to a power source. They just require a connection to a receiver or amplifier that can also serve as a power supply.
Is standard speaker cable allowed in walls?****
Use only wire that is approved for installation inside walls. A CL2 or CL3-rated speaker wire is what you want to buy. For installation in plenum- rated airspace above a drop ceiling in a commercial building, wire-rated CL2P or CL3P is required. If you’re putting cable through the ground to outdoor speakers, it should be direct burial rated.
Do in-wall speakers pose a fire risk?****
A speaker’s heat output is thought to be far too little to start a fire.
Do on-wall speakers outperform built-in speakers in quality?****
On-wall speakers’ greatest benefit is that they take up minimal room, making them the ideal option if you have limited space.
What about in-wall speakers for music?****
In-wall speakers offer excellent sound quality, flexible installation options, and a wider sound stage. All types of home entertainment systems benefit greatly from having them.
What results in a speaker being silent?****
Check for any loose cables or cords at the speaker and headphone connections. Ensure that all cables and cords are plugged in. Make sure all cords and cables are plugged into the appropriate jack if there are multiple 5mm jacks available, particularly if you have a surround sound system.
What stops a speaker from functioning?****
The majority of problems with audio systems are caused by poor or inaccurate connections and wiring. Incorrect settings on your TV, AV receiver, and speakers might potentially cause issues. Unbelievably, improper speaker placement can also cause some audio-related problems.
Why must speakers be set back from a wall?****
If at all feasible, keep your speakers away from the walls because sound waves might be affected by reflections off of nearby objects.
What safety measures need to be taken when installing insulation?****
To prevent eye irritation, wear goggles and a head covering. gloves and long- sleeved, baggy clothing to reduce skin contact.
How can I tell if my speaker is malfunctioning?****
Damage to a blown speaker may be audible with some mechanical movement. It should sound like a solid drum if you lightly tap the speaker’s cone. A defective speaker can be identified if you hear rattling, similar to a loose snare drum.