PHILIPS D260 Cordless DECT Landline Phone User Manual

June 4, 2024
Philips

PHILIPS D260 Cordless DECT Landline Phone

PHILIPS D260 Cordless DECT Landline Phone

OVERVIEW

IN CALL

  • Enter the option menu.
  • Access the redial list.
  • Adjust the volume.
  • Recall (network dependent).
  • End calls.
  • Enter a pause (press and hold).
  • Turn the speaker on/off.
  • Mute/unmute the microphone.

IN MENU

  • Confirm/ Select/ Enter the option menu.
  • Cancel /back
  • Up/ down
  • Exit menu.

DISPLAY ICONS

  • It remains steadily on when browsing incoming calls in the call log.
  • It indicates an outgoing call in the redial list.
  • It flashes when there is a new missed call or when browsing new missed calls. lt remains steadily on when browsing the missed calls in call log that are already read.
  • It flashes when receiving an incoming call. It remains steadily on during a call.
  • The speaker is on.
  • The ringer is off.
  • D265 only: answering machine: it flashes when there is a new message or when the memory IS It remains steadily on when the telephone answering machine is turned on.
  • Voice messages indicator: flashes for new messages, IS steady for reviewed messages. This is network dependent
  • It is displayed when you scroll up/down a list or increase and decrease the volume.
  • There are more digits on the right. Press to read.
  • ECO+ The ECO+ mode is activated.

STAND BY

  • Access the main menu.
  • Access the redial list.
  • Phonebook
  • Call log
  • Make and receive calls.
  • Switch the handset on/off (press and hold).
  • Make intercom call (press and hold).
  • Lock/unlock the keypad (press and hold).
  • Make and receive calls through the speaker.
  • D265 only:
    • Press to listen to new message from the answer machine. l Access the answer machine menu.

IN TEXT INPUT

  • Delete text.
  • Enter a space.
  • Switch upper/lower case.

CONNECT

PHILIPS D260 Cordless DECT Landline Phone
28

GET STARTED

Insert batteries

Configure your phone

  • When using your phone for the first time, you see a welcome message (country dependent).
  • Set the country and language if prompted.
  • Set the date and time.
  • If the time is in 12-hour format, press to select [am] or [pm] (country dependent).

Charge your phone

  • Flashing: low battery
  • Scrolling: charging in progressPHILIPS D260 Cordless DECT Landline Phone 31

INFORMATION

To access the user instructions online, use the reference model number written on the product label at the bottom of the base station.

ENJOY

Phonebook (Add record)

  • Press
  •  Select [Phonebook]> [Add new]
  •  Follow on-screen instructions.

Call from the phonebook

  •  Press
  •  Select a record and press

Call log

  • Press
  • Select a record and press

View Record

Press > < VIEW

Save record

  •  Press > > [Save number].
  •  Follow on-screen instructions.

Delete record

  •  Press > > [Delete].
  •  Follow on-screen instructions. Redial list

Call from the redial list

  •  Press
  •  Select a record and press.

Save record

  •  Press > > [Save number].
  •  Follow on-screen instructions.

Delete record

  •  Press > > [Delete].
  •  Follow on-screen instructions.

Telephone answering machine (for D265 only)

  • Record an announcement
  • 1 Press > [Answ machine] >
  • [Announcement].
  •  Follow on-screen instructions.
  • Listen to the incoming messages
  • Press > [Answ machine] > [Play].

Delete incoming messages

  •  When you listen to the message, press to enter the options menu.
  •  Select [Delete], then press

Register additional handsets

  • You can register additional handsets to the base station.
  • Press
  • Select [Services] > [Register], then press
  • Press and hold on the base station for 5 seconds.
  • Enter the system PIN/passcode (0000).
  • Press
  • Registration is complete in less than 2 minutes.

Restore default settings

  • You can reset your phone settings to the original factory settings.
  • Press .
  • Select [Services] > [Reset], then press to
  • Follow on-screen instructions.

Direct access memory
You have 2 direct access memories (keys 1 and 2). To dial the saved phone number automatically, press and hold on the keys in standby mode. Depending on your country, keys 1 and 2 are preset to the voice mail number and information service number of your service provider respectively (network dependent).

Important safety instructions

The Electrical network is classified as hazardous. Ihe only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. Refer to safety information before using the product. Hereby, IP Vision Europe B.v. declares that this product is in compliance with the essential requirements and other relevant provisions of

Directive 2014/53/EU

  • Use only the power supply listed in the user instructions.
  • Use only the batteries listed in the user instructions.
  • Do not allow the product tO come into contact with liquids.
  • Risk of explosion i battery is replaced by an incorrect type.
  • Dispose of used batteries according to the instructions.
  • When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid hearing damage.

Technical data

  • Battery
  • Philips: 2 x AAA NiMH 1.2V Rechargeable
  • 550 mAh batteries
  • Use only the supplied batteries.

Adapter

  • Phonebook with 50 entries
  • Call log with 20 entries
  • Talk time: 16 hours
  • Standby time: 180 hours

Frequently asked questions

  • No signal bar is displayed on the screen.
  •  The handset is out of range. Move it closer to the base station.
  •  If the handset displays [Unregistered], register your handset (see the section on “Register additional handsets”).

If I fail to pair (register) the additional handsets to the base station, what do I do?

  • Your base memory is full.Access > [Services]
  • [Unregister] to unregister the unused handsets and try again.

I have chosen a wrong language which I cannot read, what do I do?

  •  Press to go back to the standby screen.
  •  Press to access the main menu screen.
  •  The following options will appear on the screen:
  •  Select them to access the language options.
  •  Select your own language.

My handset is in searching status, what do I do?

  •  Make sure that the base station has power supply.
  •  Register the handset to the base station.
  •  Move the handset closer to the base station.

I cannot change the settings of my voice mail, what do I do?

  • The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.

No display

  •  Make sure the batteries are charged.
  •  Make sure there are power and phone connections.
  • The handset on the charger does not charge.
  •  Make sure the batteries are inserted correctly.
  •  Make sure the handset is placed properly on the charger.The battery icon animates when charging.
  •  Make sure the docking tone setting is turned on.
  • When the handset is placed correctly on the charger, you can hear a docking tone.
  •  The charging contacts are dirty. Disconnect the power
  •  Batteries are defective. Purchase new ones with the Bad audio (crackles, echo, etc.)
  •  The handset is nearly out of range. Move it closer to the base station.
  •  The phone receives interference from the nearby electrical appliances. Move the base station away from them.
  •  The phone is at a location with thick walls. Move the base away from them.
  • The handset does not ring.
  • Make sure the handset ringtone is turned on.
  • The caller ID does not display.
  •  The service is not activated. Check with your service provider.
  •  The caller’s information is withheld or unavailable.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals