BOOX Leaf 2 Series Electronic Book User Guide

June 3, 2024
BOOX

BOOX Leaf 2 Series Electronic Book

BOOX Leaf 2 Series Electronic Book product-img

OVERVIEW

BOOX Leaf 2 Series Electronic Book fig
\(2\)

  1. Powar Powar
  2. USB-C-Port
  3. Mic
  4. Speaker
  5. Page-turn Buttons
  6. TF card

IN THE BOX

BOOX Leaf 2 Series Electronic Book fig
\(3\)

  • a BOOK Device
  • b. Wamanty Cerd
  • c Quick Start Guide
  • d. USB-C Cable

QUICK START GUIDE

  • Turn on the device: Hold down the power button for 2-3 seconds.
  • Charging: When the battery is low or the device can not be turned on, pbese cormect your BOCX with a PC or an Adaptor to charge it. When the device is charging. the indicator shows red when the battery is charged, the indicator turns blue.
  • Firmware update: Download the update packages to the root directory of that ocal storsg8 or get OTA updates on the demo To force shutdown, catholic the power button for about B social

CAUTIONBOOX Leaf 2 Series Electronic Book fig \(1\)

You can read the full version of the Leer Maruel on the official BOOX website http://www.boax.com/downloads/

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction

Customer support center
https://www.boax.com/support
Email: heb@boox.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals