COLOP e-mark Create User Manual

June 2, 2024
colop

COLOP e-mark Create User Manual

COLOP e-mark Create

QUICK SET UP GUIDE

For complete instructions visit: emarkcreate.colop.com/support

QUICK SET UP GUIDE 1

QUICK SET UP GUIDE 2

QUICK SET UP GUIDE 3

QUICK SET UP GUIDE 4

PRINTING AT A GLANCE

PRINTING AT A GLANCE

  • In the app select New Imprint from the drop down menu.
  • Choose Start Without Template or select a pre-made template from your preferred category.
  • Arrange or edit your artwork on the canvas.
  • Once your design is ready to go select the e-mark® create icon in the top right corner.
  • The e-mark® create will beep & the app will indicate when your print has been received.
  • Simply swipe e-mark® create to print your design.

MENU GUIDE

  • Print your design

  • Connect your e-mark® create check battery & ink levels

  • Choose a customizable template or design your own.

  • View, edit or print a previous design.
    Updated preferences, clean print head, & more.

  • Web instructions, order ink cartridges, & more

IMPRINT SETTINGS

IMPRINT SETTINGS

  • Choose between single line or multi-line canvas.
  • Adjust the width of your canvas.
  • Turn continual printing on or off.

MULTI-LINE PRINTING

MULTI-LINE PRINTING

  • Choose either two or three line printing option.
  • Once your design is ready to go select the e-mark® create icon in the top right corner.
  • The e-mark® create will beep & the app will indicate when your print has been received.
  • Follow the chart above to print each line. The e-mark® create will beep to indicate when you should change direction.

CONTINUAL PRINTING

CONTINUAL PRINTING

  • Make sure continual marking is turned on in imprint settings.
  • Once your design is ready to go select the e-mark® create icon in the top right corner.
  •  The e-mark® create will beep & the app will indicate when your print has been received.
  • Swipe e-mark® create to print your design. The e-mark® create will continue to print as long as it is in motion.

AUTOMATIC CLEANING CYCLE

AUTOMATIC CLEANING CYCLE

The e-mark® create cleans its print head automatically whenever it is taken from the docking station. The intensity of cleaning increases the longer the e-mark®
create is not used.

  • Take e-mark® create from docking station.
  • Hold briefly in the air (wait for ink to disperse).
  • Put on Paper & print.

Do not point towards the eyes, face, or skin. Do not point towards docking station or towards the print surface during the cleaning cycle.

LIGHT GUIDE

LIGHT GUIDE 1

LIGHT GUIDE 2

Read More About This User Manuals…

COLOP-e-mark-Create-Manual-Optimized.pdf

COLOP-e-mark-Create-Manual-Orginal.pdf

Questions about your Manual? Post in the comments!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals