Zebra ZC10L Card Printer User Guide
- June 4, 2024
- ZEBRA
Table of Contents
Zebra ZC10L Card Printer
Product Specifications
- Model: Zebra ZC10L Card Printer
- Shipment Content:
- 1 x ZC10L Card Printer
- 1 x Platen Roller
- 1 x Power Cable
- 1 x USB Cable
- 1 x Card Catcher
- 1 x Benson Box
Product Usage Instructions
Quick Setup
- Remove the printer from the case by grabbing it from the bottom on both sides.
- Insert cleaning roller:
- Place the printer on a flat surface and open the top door.
- Push the cleaning roller into place until you hear a click.
- Ensure the thicker end is on the left.
- Install Print Ribbon:
- Slide the supply spool into the guide rails matching the White Canal.
- Slide the take-up spool into the guide rails.
- Card Installation
- Open the front drawer and insert plastic cards.
- Fan out the cards to remove the static charge.
- Place the Card Pickup Tray on the outside door and close the front cover.
- Maintenance
- Disposing of card waste
- Open the card drawer and remove the waste bin contents into a trash receptacle.
- Re-insert the waste bin and close the card drawer.
- Power & Connection
- Insert the Power Cable into the rear of the printer.
- Connect one end of the USB cable to the rear of the printer and the other end to your laptop.
- Flip the power switch to On.
Frequently Asked Questions
Q: How do I dispose of card waste?
A: To dispose of card waste, open the card drawer, remove the waste bin, empty its contents into a trash receptacle, re-insert the waste bin, and close the card drawer.
Q: How do I remove the cleaning roller?
A: Remove the cleaning roller by pulling up on it and placing it back into the slot inside the pelican case.
Shipment Content
- 1 x ZC10L Card Printer
- 1 x Platen Roller
- 1 x Power Cable
- 1 x USB Cable
- 1 x Card Catcher
- 1 x Benson Box
Quick Setup:
- Remove the printer from the case
- Grab the printer from the bottom on both sides using the space provided in the case. The printer is heavy, make sure to have a firm hold of the printer when pulling it out.
- Insert cleaning roller
- See the image below and/or scan this QR code for a video guide.
- a. Place the printer on a flat surface and open the top door.
- b. Push the cleaning roller into place as shown until you hear an audible click. Pay close attention to the roller end, the thicker end goes to the left. Please see the diagram below.
- Install Print Ribbon
- See the image below and/or scan the QR code for a video guide.
- a. Slide the supply spool into the guide rails and toward the rear of the printer. The White end of the Roll must go in first on the left side, matching the White Canal.
- b. Slide the take-up spool into the guide rails and toward the front of the printer.
- The roller must be installed before use and removed before shipping the printer back.
- Setup Video Guide
- Scan this QR code with your phone camera for video.
- Insert the Plastic Cards:
- First, open the front drawer by pressing the card drawer release button.
- Pull on the blue latch and insert the Plastic cards as shown below. Fan them out to remove any static charge from the cards.
- Place the Card Pickup Tray on the outside door and close the front cover.
- Insert the Power Cable into the rear of the printer.
- Connect one end of the USB cable to the rear of the printer and the other end to your laptop.
- Flip the power switch to On.
- Disposing of card waste.
- a. Open the card drawer by pressing the card drawer release button.
- b. Remove the waste bin and empty the contents into a trash receptacle.
- c. Re-insert the waste bin.
- d. Close the card drawer.
- Reminder: Remove the cleaning roller by pulling up on it.
- Place it back into a slot inside the pelican case.
Contact
Setup Video Guide: Scan this QR code with your phone camera for video.
Contact our Support Team:
- www.choose2rent.com/help
- +1800-622-6484 Ext. 3 (USA)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>