HOMCOM 835-921V70 Counter Stool Instruction Manual
- June 4, 2024
- HOMCOM
Table of Contents
HOMCOM 835-921V70 Counter Stool
Product Information:
This product is a versatile assembly kit designed for various applications. It includes components labeled with alphanumeric codes for easy identification during assembly.
Specifications:
- Model: IN221100101V01_GL_835
- Part Number: N221100101V01_GL_835-921V00_835-921V70
- Dimensions: 120 units
- Language: English (EN)
Product Usage Instructions
Assembly Guidelines:
- Identify parts using the alphanumeric codes provided in the manual.
- Avoid confusion between similar screws or bolts.
- Connect all parts before fully tightening any bolts.
- Screw components in place but refrain from tightening them fully until the entire assembly is complete.
Step-by-Step Assembly:
- Begin by identifying parts A, B, C, D, E, F, G as per the manual.
- Follow the sequence of steps outlined in the manual for proper assembly.
- Ensure that screws are inserted correctly without overtightening.
- Verify that all components are securely connected before finalizing the assembly.
Frequently Asked Questions
Q: What should I do if I encounter difficulty during assembly?
A: If you face challenges during assembly, refer to the manual for detailed instructions. Take your time and ensure each step is followed accurately.
Q: Can I use additional tools for assembly?
A: It is recommended to use only the tools provided in the kit to prevent damage to the components. Using additional tools may void the warranty.
Q: How do I know if I have assembled the product correctly?
A: Once assembly is complete, check that all parts are securely connected and that there are no loose components. Refer to the manual for verification steps.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.Our contact details are
below:
US
Phone
001-877-644-9366
Email
customerservice@aosom.com
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only for domestic use
Instructions for use:
- Put the chair stably on a flat floor.
- Stay away from open flames.
- Avoid the overload at the chair.
Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance:
- Clean with a soft fabric.
- Check the seating regularly.
Storage conditions:
*The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to a bad
installation or withering.
If the seating is fitted with powered seat height adjustments, only trained
personnel may replace or repair those components.
PARTS
HARDWARE
NOTE
Do not confuse similar screws.Do not tighten bolts fully until all parts are
connected!
INSTALLATION
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA