PROAIM P-WV-2PL-PP Wave-2 Camera Jib Crane Instruction Manual
- June 3, 2024
- PROAIM
Table of Contents
PROAIM P-WV-2PL-PP Wave-2 Camera Jib Crane
At Proaim, our goal is to ensure 100% Customer Satisfaction in all that we do. We back our sales with a 1 year warranty from the date of purchase and work hard to resolve any problems in the unlikely event one should arise. With our commitment to continuous improvement and your Feedback, building on our reputation of providing affordable, quality products is PRIORITY #1.
Welcome To Proaim!
Dear Client,
On behalf of all the people that work so hard to provide you with the most up-
to-date, flexible and cost-efficient production gear, we would like to welcome
you into the Proaim family. By purchasing your Proaim 10′ Wave-2 Plus
Telescopic Jib Arm Crane Film Production Package, you have just joined a host
of designers, engineers, machinists, assembly, customer service and office
staff that take great pride in all that they do. Our mantra of continuous
improvement has been the guiding principle of how we conduct our business
since day one. Once you have the opportunity to experience your new Proaim 10′
Wave-2 Plus Telescopic Jib Arm Crane Film Production Package, we hope you will
agree that we craft quality products at a competitive price. Products designed
to meet and exceed the standards of today’s real production world. Standards
set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Introduction
PROAIM welcomes you to the new and modernized era with its Proaim 10′ Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand, Portable Dolly, SR. Pantilt head & Zoom Controller a portable filming solution to increase your production value. The Robust jib crane is specifically designed travel crane for indoor & outdoor video productions. Its telescopic arm feature adds flexibility to frame perfect shots in indoor and outdoor spaces. This video production package includes a rugged camera dolly for smooth, dynamic moving shots and rock solid aluminum tripod stand for immense support. Now you can create the visual effects and produce Incredibly smooth floating camera crane shots that add value to your filming productions and bring a quick return on your investment.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
ALUMINUM TRIPOD SPREADER
- In case of spreader, Take out the Spreader and spread it on floor and open the legs (as per your requirement) of spreader with the help of provided knobs.
- Now mount the Tripod Stand on Spreader, lock it in place with the rubber grips.
- In case of Dolly, Take out the bolt from the center of dolly and spread it on floor. Then put the bolt back through the center of dolly again.
- Now mount the Tripod Stand on Dolly, lock it in place with the rubber grips.
- Adjust riser height of Tripod by loosening lock controls located on each leg, slide the stand up to a desired level position and lock leg extensions in place to secure.
- Now attach the central fork with the tripod bowl, then attach bottom clamp to secure it well.
NOTE: It is important to make sure that the Central Fork is seated in the bowl
properly. That means perpendicular to the tripod bowl. Off axis installation
may hamper movement of the jib. Also you may need the assistance of a grip
stand to hold the camera end of the arm during installation preventing it from
falling as it will be front heavy at this point. You may also need the grip
stand or assistance at the rear of the jib when mounting the camera.
- Unscrew the knob to extend jib arm at back and retighten the knob. Secure all the connections.
-
Insert the weight bar into the jib arm.
-
Now slide in weight to it as per your requirement and screw-in weight closer properly.(Counter weight Not Included)
- Loosen the knobs of Jib arm to extend the front telescopic post of the Jib.
- Extend the Jib as per your requirement and tighten all the knobs to secure.
- Loosen the bolts and remove the 100mm bowl.
Mount Sr. Pan Tilt Head, follow these steps:
- Attach the flate base plate and secure by tightening the bolts and then attach the Pan Tilt Head and secure by tightening the bolts
-
Now, mount your camera with camera mounting screw on Pan Tilt Head. Note: For the underslung camera setup, attach the flat base plate to the bottom of the jib camera mount and then mount the camera setup. Secure the camera (Not Included) properly.
-
For 100mm fluid head setup mounting, attach the 100mm bowl on the top, mount the camera setup and secure it properly.
Balancing Tips
- Camera Weight 1kg 2kg 3kg 4kg 5kg
- Counter Balance 2kg 4kg 6kg 8kg 10kg
PROAIM 10′ WAVE-2 CAMERA JIB CRANE ALL DRESSED UP AND READY TO GO!
Warranty: We offer one year warranty for our products from date of
purchase. Within this period of time, we will repair it without charge for
labor or parts. Warranty doesn’t cover transportation costs nor does it cover
a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>