hansgrohe 75418XXX Built In Mixer Tap 2F Shower Mixer Tap Instruction Manual

hansgrohe 75418XXX Built In Mixer Tap 2F Shower Mixer Tap

DIFFERENT MODELS

Safety Notes

1. Gloves should be worn during installation to prevent crushing and cutting injuries.
2. The product may only be used for bathing, hygienic and body cleaning purposes.
3. Children as well as adults with physical, mental, and/ or sensory impairments must not use this product without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this product.
4. The hot and cold supplies must be of equal pressure.

Installation Instructions

• Before installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honored.
• The pipes and the fixture must be installed, flushed, and tested as per the applicable standards.
• The plumbing codes applicable in the respective countries must be observed.

Technical Data

• Operating pressure: max. 1 MPa
• Recommended operating pressure : 0,1 – 0,5 MPa
• Test pressure : 1,6 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 60°C
• Thermal disinfection: 70°C / 4 min
  • Safety against backflow
  • The product is exclusively designed for drinking water!

Symbol Description

• Do not use silicone-containing acetic acid!

Maintenance

• The check valves must be checked regularly accord-ing to EN 806-5 in accordance with national or regional regulations (at least once a year).

Dimensions

Flow diagram

• free flow

1. Outlet 1
2. Outlet 2

Spare parts

• XXX = Colors
• 000 = Chrome Plated
• 140 = Brushed Bronze
• 670 = Matt Black
• 700 = Matt White

Special accessories

order as an extra

• Extension Set 5 mm (when wall is not deep enough) #13612XXX + #13628XXX, #13613XXX + 13628XXX, #13614XXX + 13631XXX

• Extension Set 22 mm (when wall is not deep enough) #13617XXX + #13628XXX, #13618XXX + #13628XXX, #13624XXX + #13631XXX

• extension 25 – 75 mm #13632000

• extension 25 mm #13638000

• Security combination according to EN 1717 #13077000

• Cleaning
  

• Operation
  

• Test certificate

pump has

been installed check to see if the pump is working).

| –    Shower filter seal dirty

–    Backflow preventer cartridge dirty/defective

| –   Clean filter seal between shower

and hose

–   Clean backflow preventer cartridge, exchange if necessary #94928000 (see page 67)

Crossflow, hot water being forced into the cold water pipe, or vice versa, when the mixer is closed| – Backflow preventer cartridge dirty /

defective

| – Clean backflow preventer cartridge,

exchange if necessary

Diverter stiff / Diverter leaking| – Diverter defective| – Exchange diverter

Specifications

• Product Models: DuoTurn S 75418XXX, DuoTurn E 75417XXX, DuoTurn Q 75414XXX
• Operating Pressure: max. 1 MPa
• Recommended Operating Pressure: 0.1 – 0.5 MPa
• Test Pressure : 1.6 MPa
• Hot Water Temperature: Thermally disinfection

FAQ

Q: What should I do if there is low water flow?

• Cause: The shower screen seal is dirty or defective.
• Solution: Clean or replace the screen seal between the shower and hose, part #94928000 (refer to page 67).

Q: What if the diverter is not working?

• Cause: The diverter is defective.
• Solution: Replace the diverter. Refer to the installation instructions on page 64 for guidance.

Maintenance

Dimensions

Flow diagram

Spare parts

Special accessories

Cleaning

www.hansgrohe.com/cleaning-recommendation

Operation

Test certificate

Cleaning recommendation / Warranty / Contact

Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440 E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>