PENSTAR N10G01 eNote Graphic Drawing Tablets User Guide

PENSTAR N10G01 eNote Graphic Drawing Tablets

Product Information

Specifications:

• Connectivity: USB-C
• Stylus: Digital Stylus with Pen top (Eraser) and Button

Product Usage Instructions

Getting Started:

1. Press and hold the Power button to turn on the device.
2. Use the USB-C port for charging, OTG (On-The-Go), or connecting headphones.

Button & Stylus Control:

• To navigate, use the stylus on the screen as finger touch is not available.
• Customize home widgets by clicking on the respective areas of the screen.
• Access notifications by clicking the top left corner and the dropdown menu by clicking the top right corner.
• Utilize the stylus top button for quick access to custom buttons.
• Use the stylus button for various functions such as back/refresh.

Digital Stylus:

• The pen top serves as an eraser for corrections.
• The pen clip allows for easy attachment to the device.
• Replace nibs as needed for optimal performance.
• The button on the stylus can be customized for specific actions.

Frequently Asked Questions (FAQ):

• Q: Can I use my fingers to navigate on the screen?
  A: No, finger touch is not available. Please use the included digital stylus for navigation.

• Q: How do I shut down or restart the device?
  A: Press and hold the Power button to access the shutdown/restart options.

• Q: How do I charge the device?
  A: Connect the device using the USB-C port with the provided charging cable.

Get started

1. Stylus position
2. Cover magnetic attach point
3. Power button (long press to shutdown/restart)
4. USB-C (charge/OTG/headphone)

Button & Stylus control

1. Click top left corner to view notifications
2. Click top right corner to view the dropdown menu
3. Click to custom home widgets
4. Use stylus to control screen (Finger touch not available)
5. Press top button to custom quick buttons
6. Back/Refresh
7. Navigation bar

Digital Stylus

1. Pen top (Eraser)
2. Pen clip
3. Nibs
4. Button
5. Nib

FCC STATEMENT

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having again greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Specific Absorption Rate (SAR) information:

• This Tablet meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
• The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC&ISED RF Exposure Information and Statementthe The SAR limit of USA (FCC) and Canada(ISED) is 1.6 W/kg averaging over one gram of tissue.
  Device type: Tablet has also been tested against this SAR limit.

This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body. To maintain compliance with FCC&ISED RF exposure requirements, use accessories that maintain an 0mm separation distance between the user’s body andthe back of the phone. The use of belt clips, holsters and similar accessories shouldn’t contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC&ISED RF exposure requirements and should be avoided.

© 2024 Penstar Innovation Inc. – All rights reserved
www.penstardeal.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>