V-TAC VT-42112 Magnetic Lights Instruction Manual
- June 1, 2024
- V TAC
Table of Contents
V-TAC VT-42112 Magnetic Lights
INTRODUCTION & WARRANTY
-
VT-42112 MAGNETIC FLEXIBLE TUBE
-
VT-42112 MAGNETIC FLEXIBLE TUBE
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives n warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
TECHNICAL DATA
MODEL| SKU| INPUT
VOLTAGE| POWER| LUMENS| BEAM
ANGLE| CRI| IP
RATING | BODY
TYPE| DIMENSION
---|---|---|---|---|---|---|---|---|---
VT-42112| 10277| DC 48V| 11W| 1270 Lm| 200°| 80| IP20| PC| 1066x150x26mm
10278| DC 48V| 11W| 1320 Lm| 200°| 80| IP20| PC| 1066x150x26mm
VT-42024| 10279| DC 48V| 23W| 2760 Lm| 200°| 80| IP20| PC| 2066x150x26mm
10280| DC 48V| 23W| 2850 Lm| 200°| 80| IP20| PC| 2066x150x26mm
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
- Proper grounding should be ensured throughout the installation.
- Do not connect with AC 220V directly. Use DC 48V transformer.
- For Indoor use only
This marking indicates that this product should not be disposed of with other household wastes.
Caution, Risk of electric shock
-
Non-replaceable light source
-
Non-replaceable control gear
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Trun off the power.
- Drill a hole on the wall and insert the expansion plug into the holes.
- Fix the rail on the wall using screws. (Figure).
- Connect DC 48V power supply with the main supply. (Figure 3).
- Install the luminaire on the track rail.
- Switch on and test.
