Lunix LX18 Vibration Plate User Manual

Lunix LX18 Vibration Plate

Product Information

Specifications:

• Model: [Insert Model Number]
• Compliance: Part 15 of FCC Rules
• Radiation Exposure Limits: FCC approved
• Operating Distance: Minimum 0cm between radiator and body

Product Usage Instructions

Safety Precautions

Before using the device, please read and understand the safety precautions outlined in the user manual to prevent any accidents or damage.

Installation

Place the device on a stable surface with proper ventilation to prevent overheating. Ensure there is a minimum distance of 0cm between the radiator and your body during operation.

Power On/Off

To power on the device, press and hold the power button for a few seconds. To power off, repeat the process.

Interference Management

If you experience interference while using the device, try adjusting the positioning or moving away from other electronic devices that may cause interference.

Cleaning and Maintenance

Regularly clean the device with a soft, dry cloth to prevent dust buildup. Avoid using harsh chemicals or liquids for cleaning.

Frequently Asked Questions

Q: Can I modify the device for better performance?

A: No, any modifications not approved by the manufacturer could void the warranty and may pose safety risks.

Q: How far should I keep the device from my body during operation?

A: The device should be operated with a minimum distance of 0cm between the radiator and your body as per FCC regulations.

Please read carefully the instructions:

• Thank you for using the grease machine produced by our company.
• Before use, please read this manual in detail, correctly grasp the use method, in order to make full use of its excellent performance,  I believe that it will bring convenience and comfort to you and your family life.
• Please keep the instructions for future reference.
• If you encounter problems in the process of use, please contact our after-sales service or the company, we will serve you wholeheartedly, thank you for your cooperation.

Precautions before use

1. Warm up before use, please use according to your own physical ability and physical condition, do not overuse;

2. The power plate should be placed on the ground of smooth and stable use;

3. Must do check the product before each use, all components to determine the lock, if have worn parts can be used only need to change in time.
   You used to wear loose clothes, to prevent parts hooks or clips and dangerous;

4. The hands and feet away from the movement parts or chain belt, in order to prevent the injury;

5. The product is strictly prohibited for children under 6 years old, and pets are not allowed near the product.

6. When using this product, in case of headache, dizziness, heart rate discomfort, chest tightness and other symptoms, stop immediately and consult a doctor;

7. This product is only for personal use in home, not for business rent or community activities;

8. This machine is one of the biggest safety limit weight is 100 kg.

9. When used, please keep the safe distance of 1 meter

This product cannot be used as medical apparatus and instruments, such as physical defect or movement disorder, before exercise, please consult the doctor and the fitness coach. Before using this product, please must read this manual carefully.
The company in violation of regulations and the use of the product, caused personal injury and product damage will not be responsible for.

Specification and Product components

Use of the product buttons

1. Power button: plug in the power cord open host power switch, then press the “power button” on the screen, make the host into standby mode, press the machine to stop working at work;

2. Time setting: The default working time is 10 minutes. In standby state, the “time button” can adjust the working time (1-15 minutes).

3. Speed setting:When the machine is at work, click this button control of motor speed operation speed, plus/minus 1-120 file;

4. Mode Program:In standby mode can choose: A. automatic mode B. the manual mode
   A. Automatic mode: Automatic mode has 10 modes, such as P1-P9. In standby state, press this key to select mode (switch P1-p9 according to the number of keystrokes), and then press “Start” to start work;
   B. Manual mode: Set the time to 20 minutes and press The Start button to start work.
   You can use the “speed key” to adjust the vibration gear (1-120). In work, “time button” and “mode button” cannot be switched. Press “Stop button” before switching

5. Start/stop key:press this button machine stop/start work;
   Note: all standby mode button shown in red.

Function and use of remote control

Product assembly

Product maintenance and Protection

1. Before cleaning, ensure that the power switch is off and the power plug is removed.
2. The foot skin and the shell can use wet cloth containing detergent to clean thoroughly, then wipe cleaner with dry cloth.

Note:

1. Do not use benzene, thinner, alcohol, gasoline and other corrosive & volatile detergent cleaning products, otherwise may cause product paint fade or internal structure corrosion cracking, etc.;
2. Use wet cloth to wipe the remote control may cause failures, so can only use dry cloth clean;
3. Confirm the power switch is closed, the plug is next.
   After cleaning and finished products of dust and dirt, protection products clean and away from high temperature and wet places. If long time don’t use the product, can use dust cover to cover. To prevent dirt into.

Products are common problems and solutions

Part of the fault can use the following methods to solve If still can’t solve, please consult the customer service center, we will serve you wholeheartedly.

Fault description

|

Cause analysis

|

Sulution

---|---|---

Unable to open

|

Power is not plugged in

|

Stick the plug in tight

The power switch is not open

|

Open the power switch, indicator

Instantaneous electric current too big, the fuse blew out

|

Changing a fuse of the same model

Noise is emitted

during product operation

|

Normal sound

|

No need to solve

No response to remote control operation

|

The battery of the remote control is dead

|

Replace the battery

The remote control distance is too far

|

Infrared sensing range is 1.5 meters

In use process to stop

|

The default work time is over

|

After an interval of 1O minutes, start the machine again

Can’t normal operation

|

Executing commands too frequently

|

Shut off the power and restart

FCC

FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>