Sharp SPC547 LED Alarm Clock Instruction Manual

Sharp SPC547 LED Alarm Clock

Thank you for your purchase of this quality clock. The utmost care has gone into the design and manufacture of your clock. Please read these instructions and store them in a safe place for future reference.

FEATURES

1. LOUD/SOFT switch
2. HOUR button
3. MINUTE button
4. TIME button
5. ALARM button
6. ALARM ON/OFF switch
7. SNOOZE button
8. AL indicator Dot
9. PM indicator Dot
10. USB charging port
11. BATTERY door

PRODUCT INSTRUCTIONS

POWER SUPPLY

• Begin by plugging in the power cord into a standard household outlet. The display will flash indicating it needs to be set.

SETTING THE TIME

• Press and hold the TIME button down to activate the time setting.
• While holding down the TIME button, press the HOUR button to advance to the correct hour. The PM indicator will light when the hour is advanced into the PM time.
• While holding down the TIME button, press the MINUTE button to advance to the correct minute.
• Release the TIME button when the correct time is shown on the display.

SETTING THE ALARM

• Press and hold the ALARM SET button down to activate the alarm setting.
• While holding down the ALARM button, press the HOUR button to advance to the correct hour. The PM Indicator will light when the hour is advanced into the PM time.
• While holding down the ALARM button, press the MINUTE button to advance to the correct minute.
• Release the ALARM button when the correct alarm time is shown on the display.

USING THE ALARM

• Slide the ALARM ON/OFF switch to the ON position, On the front of the clock the Alarm Indicator dot will be lit.
• Slide the ALARM ON/OFF switch to the OFF position to deactivate the alarm. The Alarm Indicator dot will no longer be visible.

USING THE SNOOZE

• Pressing the SNOOZE button when the wake-up alarm is sounding will cause the alarm to stop and the alarm will sound again in nine minutes. This will happen each time when the SNOOZE button is pressed.

SETTING THE ALARM VOLUME

• Slide the LOUD/SOFT switch to select the LOUD or SOFT alarm volume level.

USB CHARGING FUNCTION

• Conveniently charge your Smartphone.
• To charge, connect your USB device to the USB port of this alarm.
• Use only with devices that require 5V USB power. USB port provides a 2000mA recharging current.
• Devices requiring more than 2000mA should not be used. Charging time may vary for different devices.

NOTE: The charging function may not be supported for all phones or electronic devices.

BATTERY BACK UP

• Remove the BATTERY DOOR and insert two new “AAA” batteries (not included) in the direction of the polarity symbols.
• Please make sure the batteries are new and inserted correctly.
• The battery will hold the ALARM and TIME settings if the power is interrupted. There will be no display under battery power and the ALARM will sound at the correct time. If there is no battery and the power is interrupted, the display will flash 12:00 and the ALARM / TIME will need to be reset.

BATTERY WARNING

• Clean the battery contacts and also those of the device prior to battery installation. Follow the polarity (+) and (-) to place the battery.
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard (Carbon – Zinc), or Rechargeable (Nickel – Cadmium) batteries.
• Incorrect battery placement will damage the clock movement and the battery may leak.
• Exhausted battery is to be removed from the product.
• Remove batteries from equipment that is not to be used for an extended period of time.
• Do not dispose of batteries in a fire. Batteries may explode or leak.

CARE OF YOUR CLOCK

• Replace the back up battery annually, or store the clock without a battery when not in use. A soft cloth or a paper towel may be used to clean your clock. Do not use any corrosive cleaner or chemical solutions on the clock. Keep the clock clean and dry to avoid any problems.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus ( including amplifiers ) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug the apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. Please keep the unit in a good ventilation environment.
15. CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

• WARNING: The mains plug is used as a disconnect device, the disconnect device shall remain readily operable. This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Do not install this equipment in a confined or building-in space such as a bookcase or similar unit, and remain a well ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.
• WARNING: All the above markings were located on the bottom external enclosure of the apparatus, except for the label of Date Code was pasted inside the battery compartment. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on the apparatus.
• Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

DIGITAL ALARM CLOCK

• This lightning flash and arrowhead within the triangle is a warning sign alerting you of”dangerous voltage” inside the product.
• CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
• CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ON BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
• CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Please read this before operating your unit. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

If customer service is needed, please email custserv_clocks@mzb.com or call toll-free at 1-800-221-0131 and ask for Customer Service. Monday-Friday 9:00 AM – 4:00 PM EST

One-Year Limited Warranty

M.Z. Berger & Company warrants the original consumer purchaser of this product that it shall be free of defects in materials and workmanship for one year from the purchase date of this product. Defects caused by tampering, improper use, unauthorized modifications or repairs, immersion in water, or abuse are not covered by this warranty. If a defect covered by this warranty occurs during the warranty period, wrap your clock carefully and send it to the following address: M.Z. Berger & Co., Inc. 353 Lexington Ave – 14th Fl. New York, NY 10016

You must include a Proof of Purchase, either the original receipt or a photocopy and a check or money order for USD $6.00 to cover the cost of handling. Also, include your return address inside the package. M.Z. Berger will repair or replace the clock and return it to you. M.Z. Berger will not be liable for any loss or damage, including incidental or consequential damages of any kind; from any breach of warranty either expressed or implied relating to the product. Since some states do not allow the exclusion or limitation of incidental or consequential damages, this limitation may not apply to you.

Printed in China

Model: SPC547

SHARP, is registered with the U.S. Patent and Trademark Office.

FREQUENTLY ASKED QUESTIONS

What brand manufactures the LED Alarm Clock with model number SPC547?

The LED Alarm Clock with model number SPC547 is manufactured by Sharp.

What type of display does the Sharp SPC547 LED Alarm Clock have?

The Sharp SPC547 LED Alarm Clock has a digital display.

What special feature does the Sharp SPC547 LED Alarm Clock offer?

The Sharp SPC547 LED Alarm Clock includes a charging station.

What are the dimensions of the Sharp SPC547 LED Alarm Clock?

The dimensions of the Sharp SPC547 LED Alarm Clock are 6.2 inches in width and 2.3 inches in height.

What are the power source options for the Sharp SPC547 LED Alarm Clock?

The Sharp SPC547 LED Alarm Clock can be powered by both corded electric and batteries.

What is the mounting type of the Sharp SPC547 LED Alarm Clock?

The mounting type of the Sharp SPC547 LED Alarm Clock is tabletop.

What type of watch movement does the Sharp SPC547 LED Alarm Clock use?

The Sharp SPC547 LED Alarm Clock uses automatic watch movement.

What is the operation mode of the Sharp SPC547 LED Alarm Clock?

The operation mode of the Sharp SPC547 LED Alarm Clock is electrical.

What is the price of the Sharp SPC547 LED Alarm Clock?

The price of the Sharp SPC547 LED Alarm Clock is $12.97.

Why is my Sharp SPC547 LED Alarm Clock not displaying the correct time?

Ensure that the clock is set to the correct time zone and that the time is properly set. If the clock is battery-powered, check if the batteries need replacing. If the clock is electrically powered, ensure it is plugged into a functioning outlet.

What should I do if the display of my Sharp SPC547 LED Alarm Clock is dim or not visible?

Check the brightness settings of the clock and adjust them if necessary. If the clock is battery-powered, try replacing the batteries with new ones. If it's electrically powered, ensure the power source is working correctly.

How can I troubleshoot if the alarm function of my Sharp SPC547 LED Alarm Clock is not working?

Ensure that the alarm is properly set and that the volume is adjusted to an audible level. Check if there are any obstructions around the clock that may be muffling the sound.

What steps should I take if the charging station feature of my Sharp SPC547 LED Alarm Clock is not functioning?

Check if the device you're trying to charge is compatible with the charging station. Ensure that the charging cable is securely connected to both the clock and the device.

How do I troubleshoot if the buttons on my Sharp SPC547 LED Alarm Clock are unresponsive?

Clean the buttons and the surrounding area to remove any dirt or debris that may be causing the issue. Check if the batteries (if applicable) are inserted correctly and have sufficient power. If the buttons remain unresponsive, try resetting the clock or contacting Sharp support for assistance.

DOWNLOAD THE PDF LINK:Sharp SPC547 LED Alarm Clock Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>