LynPon Boho Ceiling Light Woven Hemp Rope Rattan Instruction Manual
- June 1, 2024
- LynPon
Table of Contents
LynPon Boho Ceiling Light Woven Hemp Rope Rattan
Introduction
Brand: LynPon
Assembly Diagram
The assembly diagram shows an exploded view of the lighting fixture components, numbered to correspond with the installation steps. It includes a detailed illustration of the wiring connection, wall bracket, canopy, lampshade, and light bulb.
Specifications
| Component | Instruction |
|---|---|
| 1. Bracket | Attach to wall with provided anchor and screw. |
| 2. Wire | Connect to home electrical line. |
| 3. Canopy | Secure to bracket using screws. |
| 4. Lampshade | Attach to fixture with ring. |
| 5. Light Bulb | Install into lampshade. |
Important Notes
- Model Number: X0143-1
Please read carefully before installation!
Note: Please make sure that the electricity is powered off during installation! Only a professional electrician should install this kind of product!
FAQ
- Who should install the LynPon lighting fixture?
- Only a professional electrician should install this kind of product to ensure safety and proper installation.
- What should be done before starting the installation?
- Ensure that the electricity is powered off before beginning the installation process to prevent any electrical hazards.
- Are the necessary installation components provided?
- Yes, the necessary components such as the expansion anchor PVC and screws are provided with the fixture.
- Can I install the bulb before attaching the lampshade?
- No, you should first attach the lampshade to the fixture with the ring and then install the bulb.
Product Compliance
The document includes the following compliance:
- CE marking – Indicating that the product conforms with health, safety, and environmental protection standards for products sold within the European Economic Area.
- Recycling – Advising users to recycle the product appropriately.
- Do not dispose of as unsorted municipal waste – Advising users to follow proper disposal and recycling protocols for the product.
Disposal Information
The product is marked with a crossed-out wheeled bin symbol, indicating that it should not be disposed of as unsorted municipal waste and must be collected separately.
Installation Instructions
- Install the bracket on the wall with expansion anchor PVC and screw 1.
- Connect the wire 2 to your home line.
- Install the canopy 3 to the bracket with screws 4.
- Install the lampshade 5 to the fixture with ring 6, after that install the bulb 7.
X0143-1
Please read carefully before installation!!!
Note: Please make sure that the electricity is powered off during
installation!
Only a professional electrician should install this kind of product!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>