ELING 52mm GPS Universal Speedometer User Guide
- June 1, 2024
- ELING
Table of Contents
ELING 52mm GPS Universal Speedometer
Product Specifications
- Product : 52mm GPS Speedometer
- Unit Options: km/h, mph, knots
- Display : Digital screen
- Power Source : GPS
- Size : 52mm diameter
Product Usage Instructions
Unit Selection:
To switch the unit between km/h, mph, or knots:
- Press the UNIT button on the speedometer.
- The screen will display the current unit (km/h, mph, or knots).
- Use the button to cycle through the units and select the desired one.
- Once the correct unit is displayed, restart the speedometer to save the setting.
Parts
INSTALLATION GUIDE
- Cut an Φ52mm (2-1/16″) hole in the panel (II) allow a clearance of 55mm (2 3/16”). behind the panel.
- Remove fastening ring (I), insert gauge from front. Tighten gauge (III) using fastening ring ( I)
- Connect cables according to the diagram/label.
- Connect GPS Antenna and put it to good position pointing the sky directly.
- After turning power on, allow the gauge to sample satellite signal for 1 minute. The gauge will show speed in knots/km/mph
- All data is for reference only and should not be trusted as sole navigation source.
Function Select: “UNIT”
- Press and hold on the external button, then turn on the power supply.
- The screen will show “UNIT”，You can select the function to be set after release button.
- “UNIT”(switch unit between km/h, mph or knots)
- After selecting “UNIT”, the screen will show km/h, mph or knots. Please choose the unit needed. Then restart to save the setting.
FAQ
Q: How do I change the unit on the GPS Speedometer?
A: To change the unit on the GPS Speedometer, follow these steps:
- Press the UNIT button on the speedometer.
- The screen will display the current unit (km/h, mph, or knots).
- Use the button to cycle through the units and select the desired one.
- After selecting the unit, restart the speedometer to save the setting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>