platinet PFL20B LED Floor Lamp Instruction Manual
- June 1, 2024
- Platinet
Table of Contents
LED FLOOR LAMP
PFL20B
PFL20BW
Instruction
Manual
Please read this information carefully before starting the installation or using this product. Keep the installation instructions for future reference. Always pay attention to the technical data provided on the nameplate and in this installation manual.
Installation and Setup:
Remove the lamp from the packaging.
Before starting the installation, ensure the lamp is disconnected from the
power source.
Assemble the lamp according to the instructions depicted in picture number 1.
Connect the adapter to the lamp and plug it into an electrical outlet.
The lamp is now ready for use.
Gently press the ON/OFF button to turn on the lamp.
Ensure that the lamp base is stable and securely attached.
Safe Usage:
Avoid placing the lamp in areas where It may come into contact with water or
moisture.
The device should be placed on stable surfaces to prevent damage and to ensure
it does not pose a hazard to people and pets.
Do not cover the lamp with fabrics or objects that may obstruct the heat
dissipation.
Do not leave the lamp unattended while it’s in operation.
Caution against looking directly at the LED light source, which can cause eye
fatigue.
Do not operate the device in areas where the use of electrical appliances is
prohibited or when it may cause interference or other hazards. Adhere to any
prohibitions, regulations, and warnings provided by the location’s personnel
where you intend to use the device. Do not use the device near flammable
materials.
The lamp is suitable for use in environments with ambient temperatures ranging
from 10°C to +45°C.
Keep the lamp away from heat sources such as radiators to avoid plastic parts
from warping. This lamp ts intended for private use only and Is not suitable
for commercial use.
Modifications:
Do not open or attempt to repair the device yourself. The manufacturer is not
responsible for disruptions and problems caused by self-made modifications.
If you encounter issues with the lamp, contact the service center.
Before installing or performing any work on the LED floor lamp, always ensure
that the power is disconnected. For questions, problems, or the need for
additional information, please contact our customer service at [
serwis@platinet.pl ].
The light sources in this lamp cannot be replaced. When the light source
reaches the end of its lifespan, safely dispose of the device in accordance
with local regulations. Please take the product to a local waste disposal
company for recycling.
Electrical Safety:
Ensure that the outlet to which you connect the lamp is in good technical
condition and protected against surges.
Ensure that the lamp’s voltage matches the voltage In the outlet in your
location.
Do not use extension cords or power strips connected to multiple devices.
If you detect damage to the power cord or plug, immediately disconnect the
lamp from the power and take it to a service center or replace the damaged
parts.
Ensure that children and pets do not have access to the lamp and power cords.
Ensure that the power cord does not create a tripping hazard.
Maintenance:
Regularly clean the lamp using a soft cloth or sponge.
Do not use chemical agents or solvents for cleaning.
Under no circumstances submerge the device or the cord in water or pour
liquids on them.
Adjustment:
Plus: Increase brightness by tapping this button multiple times.
Minus: Decrease brightness by tapping this button multiple times.
Mode: Change color temperature by tapping this button multiple times [warm
white, neutral white, cool white].
Note: This lamp has a memory function, meaning that the last color
setting will be saved when it is turned on again.
Fig 2: Adjust the lamp neck to your needs:
The lamp neck can be adjusted vertically [up/down] up to 270 degrees.
The lamp neck can rotate horizontally [right/left] up to 270 degrees.
Note: Excessive adjustment [beyond the maximum angle) may cause damage.
Technical Specifications:
Voltage: 12V 1A
Frequency: 50/60 Hz
Power: 10W
Light Power: 680 LM
Protection Class: Class 2
Water Resistance: IP20
Light Color Adjustment: 3000 K / 4000 K / 6000 K
Height: 152 cm
Base: Ø23 cm
Net Weight: 2100 g
WARNING:
FOR INDOOR USE ONLY.
Do not use if cord or switch is damaged. Keep out of reach of children and
animals and keep away from water.
Do not use in the bathroom or damp places. Do not pull the plug out of the
socket with wet hands.
The lamp must be at a minimum of 50cm from any object to avoid overheating.
Ensure there are no flammable materials around unit.
Ensure there is adequate ventilation around unit and top of lamp shade not
blocked or covered.
MUST BE REPAIRED BY AN AUTHORIZED PERSON ONLY.
**** Electrical products must not be thrown out with domestic waste. They
must be taken to a communal collecting point for environmentally friendly
disposal in accordance with local regulations. Contact your local authorities
or stockist for advice on recycling. The packaging material is recyclable.
Dispose of the packaging In an environmentally friendly manner and make it
available for the recyclable material collection-service.
Platinet accepts no liability for any loss or damage [whether in contract or
tort, including negligence] which may result from failure to follow warnings
and instructions, except for death or injury caused by Platinet’s negligence.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>