SEALEY CX313.V2 Workshop Trolley 3 Level Composite with Parts Storage Instruction Manual

: June 1, 2024
: SEALEY

Table of Contents

SEALEY CX313.V2 Workshop Trolley 3 Level Composite with Parts Storage
Before Instructions
Safety
Introduction And Specification
Contents
Assembly
Warranty
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY CX313.V2 Workshop Trolley 3 Level Composite with Parts Storage

SEALEY-CX313-V2-Workshop-Trolley-3-Level-Composite-with-Parts-Storage-
product

Before Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Symbol

Safety

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this trolley.
Always load evenly with the centre of gravity of the load as near centre of the trolley as possible.
DO NOT overload the trolley – see specifications.
Use the trolley in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the trolley clean and tidy in accordance with good workshop practice.
DO NOT use the trolley for any purpose other than that for which it is designed.
DO NOT stand on the trolley, use it as a ladder or allow others to ride on the trolley.
Use the wheel locks to prevent the trolley from inadvertently moving.
DO NOT leave unattended, especially when loaded, unless the wheels are locked, chocked or the trolley otherwise secured.
DO NOT use trolley on uneven ground and do not run over curbs or steps – use a ramp.
DO NOT use trolley if any part is significantly damaged, paying particular attention to the wheels.
Keep children and unauthorised persons away from the work area.

Introduction And Specification

Introduction

Composite garage workshop trolley featuring aluminium corner posts with a 30kg capacity per shelf. Each shelf features three compartments with removable dividers, seven tool holder slots, four additional compartments for small fixings and two cup/can holders. These features allow for all of your tools and equipment to be on-hand and easily accessed. Quick and easy to assemble, with four swivel castors, two featuring brakes.

Specification

Model No:……………………………………………………..CX313.V2
Capacity: ………………………………………………………. 30kg/level
Overall Size (W x D x H): ……………………570 x 455 x 895mm
Shelf Size (W x D):………………………………495 x 280 x 70mm

Assembly

SEALEY-CX313-V2-Workshop-Trolley-3-Level-Composite-with-Parts-Storage-
fig-3

Environment Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.

Important: No Liability is accepted for incorrect use of this product.