Antec AX81 Elite Gaming Case Black Instruction Manual
- June 1, 2024
- Antec
Table of Contents
Antec AX81 Elite Gaming Case Black
Overview
- This section provides an overview of the components and instructions for installing the AX81 RGB Elite series fans.
Specifications
| Component | Description |
|---|---|
| A (Figure 1) | Molex Connector – Power connector for the major fan |
| B (Figure 1) | Signal Header – Connects to the Reset (LED) switch on the I/O |
panel
C (Figure 2)| Molex Connector – Power connector for the secondary fan
FAQs
How do I install the AX81 RGB Elite series fans?
You can install the fans by following the numbered steps in the Fan Installation section above.
What is the function of the Molex Connector?
The Molex Connector is used to connect the fan to the power supply to provide power.
How do I control the lighting of the fan?
The lighting can be controlled by pressing the LED button on the I/O panel.
What should I connect to the Signal Header?
The Signal Header should be connected to the Reset (LED) switch on the I/O panel.
FAN INSTALLATION
- Connect A (Figure 1) to power supply Molex header to power it on.
- Please make sure B (Figure 1) is connected to the Reset (LED) button of the 1/0 panel.
- Connect C (Figure 2) , and connect them with A (Figure 1) .
- Press the LED button on the 1/0 panel to turn on/off the lighting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>