Antec CX200M Series RGB Micro Mini Tower Case Instruction Manual
- June 1, 2024
- Antec
Table of Contents
Antec CX200M Series RGB Micro Mini Tower Case
CX200M Series
This document details the installation process for the Antec CX200M series
computer case.
Specifications
| Instruction | Description |
|---|---|
| 1. Remove Side Panel | Instructions for removing the side panel of the |
computer case.
2. Motherboard Installation| Guide on installing a motherboard into the case.
3. VGA/PCI-Express Card Installation| Steps to install VGA or PCI-Express
cards.
4. Power Supply Installation| Process for installing the power supply unit.
5. Hard Disk Installation| Instructions for installing hard disk drives.
6. Fan Installation| Guidelines for installing additional cooling fans.
Product Overview
Installation Guide
-
Remove Side Panel
Detach the side panel by removing the designated screws. -
Motherboard Installation
Fit the motherboard into the case, aligning it with the provided standoffs.- If there are pre-installed fans, remove the rear fan and the fan over the PSU shroud first.
-
VGA/PCI-Express Card Installation
Insert VGA or PCI-Express cards into the motherboard, securing them in place .
Note: The I/O ports vary among the
different models in the series. CX200M RGB Elite is illustrated in the Manual. -
Power Supply Installation
Mount the power supply unit at the bottom of the case, securing it with screws. -
Hard Disk Installation
There are options to install 3.5″ hard disk drives or 2.5″ solid-state drives. -
Installing a 3.5″ Hard Disk Drive
-
Installing a 2.5″ Solid State Drive
-
Fan Installation
Attach additional cooling fans to the designated fan slots within the case.
For more information, visit the Antec website: www.antec.com All rights reserved. Specifications are subject to change without prior notice. All trademarks used are properties of their respective owners. No text from this document may be copied or reproduced without permission from Antec.
The 1/0 ports vary among the different models in the series. CX200M RGB Elite is illustrated in the Manual.
All rights reserved. Specifications are subject to change without prior notice. Actual products and accessories may differ from illustrations. Omissions and printing errors excepted. The content of delivery might differ in different countries or areas. Some trademarks may be claimed as the property of others.
FAQ
How do I know which screws to use for mounting the motherboard?
Refer to the motherboard manual for the appropriate screw type and use the
standoffs provided with the case.
Can I install any size power supply in the CX200M series case?
Ensure the power supply unit is compatible with the case’s form factor and
dimensions.
What if my VGA/PCI-Express card doesn’t fit?
Check if there are any obstructions and ensure you are using the correct slot
for your card’s interface.
Is it possible to install additional fans beyond what comes pre-
installed?
Yes, the case supports additional fans, and you should install them in the
designated fan slots.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>