SEALEY EVCC1216 EV Charger Cable Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
5M 16A TYPE 1 TO TYPE 2 MODE 3 EV
CHARGER CABLE
MODEL NO: EVCC1216
EVCC1216 EV Charger Cable
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR
THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE
FOR FUTURE USE.
SAFETY
Follow these instructions to
avoid the risk of death or serious injury.
DO NOT use this product on rainy days.
Make sure chargers are used in a
safe, secure place and well out of the reach of young children or pets.
DO NOT damage the products maliciously
DO NOT drop the connector or press heavy objects on its surface.
DO NOT disassemble or assemble the connector and change the internal parts
DO NOT clean the products using chemicals.
DO NOT charge while driving.
Make sure the connector is fully
inserted into the socket.
INTRODUCTION
The mode 3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.
SPECIFICATION
Model ………………………………………………………. EVCC1216
Plug Type: …………………………………………. Type 1 to Type 2
Current: ………………………………………………………………. 16A
Voltage: ……………………………………………………………..230V
Cable Length: ……………………………………………………….. 5m
Cable Specification: ………. EN50620 – 32.5mm²+20.5mm²
IP Rating: …………………………………………………………….IP54
OPERATION
4.1. Remove protective caps from plugs.
4.2. The cable must be plugged into the charging unit before plugging into the
car.
4.3. Replace protective caps on plugs after use.
ENVIRONMENT PROTECTION
**** Recycle unwanted materials instead of disposing of them as waste. All
tools, accessories and packaging should be sorted, taken to a recycling centre
and disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the
product is no longer required, it must be disposed of in an environmentally
protective way. Contact your local solid waste authority for recycling
information.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
[email protected]
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
EVCC1216 Issue 1 05/06/2020