ENTTEC 73546 PLink Injector 5V Pixel Controller Installation Guide
- June 1, 2024
- ENTTEC
Table of Contents
ENTTEC 73546 PLink Injector 5V Pixel Controller
Product Information
Specifications
- Product Name: PLINK 5V (73546) / PLINK 12-24V (73544)
- Compatible with: ArtNet / sACN Lighting Players & Controllers
- Additional Components: PIXELATOR MINI (SKU: 70067), PC Running ELM Software (SKU: 70581)
- Power Options: PLINK Power Option
- Maximum Distance: 300 METRES MAXIMUM DISTANCE FROM PLINK PORT TO PLINK PORT
- Maximum Distance to First Pixel: 3 METRES MAXIMUM DISTANCE FROM PLINK PORT TO FIRST PIXEL
Product Usage Instructions
Setup
- Connect the PLINK device to a compatible ArtNet/sACN Lighting Player or Controller.
- Ensure the PIXELATOR MINI and PC Running ELM Software are properly set up and connected.
- Use the appropriate PLINK Power Option according to your setup requirements.
- Connect the PLINK device using a CAT5/6 Cable to a 12-24VDC Network Switch.
- For additional power supply, use the PLINK INJECTOR 5V (SKU: 73546) or 12-24V (SKU: 73544) as needed.
Connections
Make sure to connect the PLINK device following the correct polarity:
- V – to GND
- V + to VCC
- DATA to DI
FAQ
Q: What is the maximum distance supported between PLINK ports?
A: The maximum distance supported between PLINK ports is 300 meters.
Q: What is the maximum distance supported from a PLINK port to the first pixel?
A: The maximum distance supported from a PLINK port to the first pixel is 3 meters.
Q: Are there any specific power requirements for the Pixel LEDs SmartPXL40?
A: Yes, the Pixel LEDs SmartPXL40 requires a DC PSU & Protection for proper operation.
Installation
ArtNet/sACN Lighting Players & Controllers
PLINK Power Option
PLINK 5V (73546) / PLINK 12-24V (73544) Visit the ENTTEC website for the latest version.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>