ZMISHIBO B0CJHQDN54 20 Inch Smart Enclosed Ceiling Fan User Manual

ZMISHIBO B0CJHQDN54 20 Inch Smart Enclosed Ceiling Fan

WARNING

• To avoid fire, shock and serious personal injury, follow these instructions.

1. Read your user’s manual and safety information before installing your new fan. Review the accompanying assembly diagrams.
2. Before servicing or cleaning the unit, switch off the power at the service panel and lock the service panel to prevent power from being switched on accidentally. If the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel.
3. Be cautious around the fan and blades when clearing, repairing, or working near the fan. Always turn off the power to the ceiling fan before performing any servicing.
4. Do not insert anything into the fan blades while the fan is operating.
5. This appliance is not intended for use by young children or individuals with disabilities without supervision. Young children should be supervised to ensure they do not play with the appliance.
6. Before installing your ceiling fan, refer to the section on the proper method of wiring your fan. If you feel that you do not have enough wiring knowledge or experience, it is recommended to have your fan installed by a licensed electrician.

Before Installation

This manual is designed to make it as easy as possible for you to assemble, install operate and maintan your ceiling fan.

NOTE: Place the parts from the loose parts bags in a small container to keep them from being lost. If any parts are missing contact us.

Accessories

Check to see that you have received the following parts:

Package Contents

• Check to see that you have received the following parts (Fan Light)

Energy Saving Usage

• Ceiling fan performance and energy savings rely heavily on the proper installation and use of the ceiling fan. Here are a few tips to ensure efficient product performance.

Choosing the Appropriate Mounting Location

Ceiling fans should be installed or mounted in the middle of the room and positioned at least 7 feet above the floor and 18 inches away from the walls. If the ceiling height allows, it is recommended to install the fan 7~9 feet above the floor to achieve optimal airflow.

Turn Off When Not in the Room

If the room is unoccupied, turn off the ceiling fan to save energy.

Using the Ceiling Fan Year Round

Summer Season: Use the ceiling fan in the counterclockwise direction. The \airflow created by the ceiling fan produces a wind-chill effect, making you \feel cooler. Select a fan speed that provides a comfortable breeze; lower speeds consume less energy. Winter Season: Reverse the motor and operate the ceiling fan at a low speed in the clockwise direction. This produces a gentle updraft, which pushes the warm air near the ceiling down into the occupied space. Remember to adjust your thermostat when using your ceiling fan. This simple step can lead to additional energy and cost savings.

Electrical and Structural Requirements

• Your new ceiling fan will require a grounded electrical supply line of AC 110-130V/60Hz and a 15 Amp circuit. According to electrical codes, it is neces- sary to use a fan-rated outlet box to support the additional weight and motion associated with a ceiling fan. A fan-rated box will be clearly labeled as such and is typically designed to support ceiling fans weighing up to 70 pounds. Fan-rated outlet boxes are available in various ratings and designs. It is essential to ensure that the rating of your ceiling fan outlet box meets the requirements for the specific ceiling fan you are installing. Please refer to the figures below for different structural configurations that can be used for mounting the outlet box.
• Low-profile use (Figure 1): A 1/2-deep pancake box is meant to be screwed to a joist or block. It is used if only one cable is coming into the box. It is also available in a saddle-mount configuration.
• Deep-profile use (Figure 2) A 2-1/4″ deep box can be attached to blocking between joists and is roomy enough to handle more than one cable.
• Brace use (Fiqure 3) Paired with a deep box, this hanger is meant to span between two joists and takes the place of\ wooden blocking.
• If your fan is to replace an existing light fixture, turn power off at the main fuse box and remove the existing light fixture.

WARNING

To ensure safety and prevent potential electrical shock, it is not sufficient to simply turn off the wall switch. Prior to wiring, make sure to turn off the electricity at the main fuse box. All wiring should be done in accordance with national and local electrical codes. Additionally, it is important to properly ground the ceiling fan as a precautionary measure against possible electrical shock. Following these guidelines will help ensure the safe installation and operation of your ceiling fan.

WARNING

Do not use a variable (rheostat) wall controller or dimmer switch to operate this fan. Doing so can cause damage to the ceiling fan’s remote control unit. It is recommended to only use the provided remote control.

Installation

• Take out the ceiling plate
  Use a screwdriver to unscrew the screws and remove the ceiling plate. *Take out the accessories bag and remote controller.

• Install ceiling plate
  Use the included wood screws when securing the fixture to a support struc- ture with an approved electrical outlet box. Drill 9/64″ pilot holes in the support structure to assist in securing the ceiling plate with the hardware found in the hardware bag.

• Wiring
  TIPS: To facilitate wiring, please use a safety rope to hang the lamp body.
  Connect the”Neutral wire” (white wire)from the ceiling to the white wire of ceiling fan. Connect the “Live wire” (black wire) from the ceiling to the black wire of ceiling fan. Connect the “Ground wire” (green or yellow/green or bare) from the ceiling to the wire from ceiling fan.

• Fix ceiling fan
  Align the screw of the ceiling plate with the hole of the ceiling fan light and push the ceiling fan up.

• Fix and Tighten screws
  Insert the 4 screws and tighten up.

• Installing Wall Plate
  Attach wall plate using the two screws provided.

Operate Your Ceiling Fan

• IMPORTANT: Using a full range dimmer switch to control fan speed will damage the fan. To reduce the risk of fire or electrical shock, do not use a full range dimmer switch to control the fan speed. (Figure 1).
  Only control light on/off via wall fan switch.

• Restore electrical power to the outlet box by turning the electricity on at the main fuse box. (Figure 2).

Installation Recommended

Remote Control

NOTE:

Please insert 2 batteries before using. AAA 1.5V battery x 2pcs (included)

Paring method:

1. Operating 3 seconds within wall switch on
2. Long-press 6~10S “ALL OFF” button
3. When the light flashes rapidly three times, it means the pairing is successful.

The method to cancel the pairing is the same as mentioned above.

Download APP

• Download and install App:
  Use your phone to scan the QR code below or search “Tuya Smart” / “Smart Life” at Appstore/Google Play.

• For the first use, you need to use your mobile phone number or Email address to register then log in.

APP Control

IMPORTANT:

• Turn on BLUETOOTH on your phone !!!

Two methods to put the light into pairing mode:

1. Turn light ON-OFF-ON-OFF-ON, when the ceiling fan light is flashing, it is on the paring process.
2. Long press on the remoter 5 seconds, when the ceiling fan light is flashing, it is on paring process.

Now you can operate on your phone:

Troubleshooting

WARNING

For your own safety turn off power at fuse box or circuit breaker before troubleshooting.

THE FAN WON’ TSTART OR THE LIGHT WON’T OMEON

| 1. Fuse or circuit breaker blown.

2. Loose power line connections to the fan or loose switch wire connections in the switch housing.

3. The wiring between the receiving box and the fan is not properly connected.

4. The receiving box is damaged due to the wrong connection.

| 1. Check main and branch circuit fuses or circuit breakers.

2-3. Check line wire connections to the fan and switch wire

connections in the switch housings CAUTION: Make sure the main power is turned off!

4. Contact us for support.

FAN WOBBLES

EXCESSIVELY

| 1. Check for loose ceiling screws.

2.  Check if the four screws on the canopy are loose.

| 1-2. Tighten the loose screws.

FAN SOUNDS NOISY

| 1. Check for loose ceiling screws.

2. Check if the four screws on the canopy are loose.

3. Check for wrong wire connection to the wall switch or light dimmer.

| 1-2. Tighten the loose screws.

3. Disconnect from the wall switch and use the remote controller only.

REMOTE DOES NOT WORK| 1. Battery out of power

2. Battery not installed correctly

3. Not paired

4. Bluetooth funciton not on

| 1. Use new battery

2. Install again to ensure right

3. Pair with light

4. Made sure open BLE to pair

APP NOT WORK

|

1. Phone Bluetooth not work

2. Fan not paired

| 1. Make sure phone bluetooth function is on

2. See page.8, 2 methods to make the lamp into pairing mode

Maintenance

Periodic cleaning of your new ceiling fan is the only maintenance that is needed. When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish. Avoid using water as it can damage the motor, finish, and create the possibility of electrical shock. It is best to dry clean the fan to ensure its safe operation.

Customer Service

30-Days Full Refund Guarantee

If you are not completely satisfied or the item isn’t what you expected, just tell us within 30 days. We will give you a full refund unconditionally.

Friendly Reminder

it’s better to contact us than leaving a negative shopping experience. Nothing is more important than your satisfaction, and we will do our best to serve you.

Quick Response within 12 Hours

You can contact us without any hesitation at any time of the day, and we will reply to you within 12 hours. ( It would be appreciated if you could provide us with a video or pictures, if available)

2-year Warranty

We will send you brand new items for free or give you a full refund if any quality problems occur within 2 years from the date of purchase.

Contact Information

You can contact us by sending an email to support@fanlamppro.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>