tp-link 10-100Mbps WDM Media Converter Installation Guide

June 5, 2024
tp-link

tp-link 10-100Mbps WDM Media Converter Installation Guide

Package Contents

  • Converter,
  • Power Adapter,
  • Installation Guide

Scenario 1: Connect Devices with Optical Interfaces

Connect Devices with Optical Interfaces

Note:

  • The maximum output power of TL-FC111PB-20 is 15.4W. PoE devices that require more than 15.4W are not supported.
  • The PoE Media Converter supplies steady power and data connectivity to a powered device such as PoE IP Camera and PoE AP.

Scenario 2: Connect Devices without Optical Interfaces

Connect Devices

LED Explanation

PWR

On: Power on
Off: Power off

Link/Act

On: Valid link
Flashing: Transmitting or receiving data
Off: Invalid link

PoE

On: Supplying power normally
Off: Supplying power abnormally or no power supply

Specifications

General Specifications

  • Standards IEEE 802.3, IEEE 802.3i, IEEE802.3u, IEEE802.3af

  • LED PWR, Link/Act, PoE

  • Connector 1 SC fiber optic; 1 RJ45 jack

  • Twisted-Pair:
    10BASE-T: 2-pair UTP/STP of Cat. 3 or above (≤100 m)
    100BASE-TX: 2-pair UTP/STP of Cat. 5 or above (≤100 m)
    100BASE-BX10: SMF

  • Fiber 9/125 μm single-mode fiber

  • Transmission Distance ≤20 km

  • Wavelength 1310 nm TX, 1550 nm RX

  • PoE 802.3af; up to 15.4 W for the PoE port

  • Power 48 V/0.375 A

  • Dimensions 94.57327 mm

Environmental and Physical Specifications

  • Operating Temperature : 0˚C to 50˚C (32˚F to 122˚F)
  • Storage Temperature : -40˚C to 70˚C (-40˚F to 158˚F)
  • Storage Humidity: 10% to 90% RH non-condensing
  • Operating Humidity : 5% to 90% RH non-condensing

Safety Information

  • Keep the device away from water, fire, humidity or hot environments.
  • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
  • Do not use damaged charger or USB cable to charge the device.
  • Do not use any other chargers than those recommended.
  • Adapter shall be installed near the equipment and shall be easily accessible.
  • Do not point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight
  • Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Declaration of conformity

EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp link.com/en/ce

UK declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www.tp link.com/support/ukca/

Customer Support

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community

For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome to email techwriter@tp-link.com.cn

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals