DOD Gonkulator Ring Modulator Owner’s Manual
- June 9, 2024
- DOD
Table of Contents
DOD Gonkulator Ring Modulator
Instruction
- GAIN – adjusts the amount distortion gain.
- DIST – adjusts the distortion output level.
- OUTPUT – adjusts the overall output level of the effect.
- FREQ – adjusts the carrier frequency for the ring modulation effect.
- RING – adjusts the ring modulator effect output level.
- INPUT – connect your instrument here.
- FOOTSWITCH – turns the effect on and off.
- LED – turns on when the effect is enabled.
- OUTPUT – connect to the next pedal’s input or to the input of your amplifier.
USING GONKULATOR
With the Gonkulator having a built-in distortion, most guitarists/bassists
will favor placing it at the beginning of their chain of effects, so start
with that placement.
A typical effects signal chain will consist of Distortion effects first then
Modulation effects (Chorus, Flanger, Phaser, Tremolo, etc…) next and then
finally Time based effects (Delay and Reverb).
The fact that Gonkulator can also be a standalone ring modulator, you can
place it in the middle or the end of the effects chain with good results. You
can always experiment with different effect placements to get it working best
for your rig.
SPECIFICATIONS
- Input 1/4” TS Unbalanced – 470 kΩ
- Output 1/4” TS Unbalanced – 100 Ω
- Current Draw 20 mA
- Bypass True Bypass
- Power 9VDC alkaline battery (not included) PS0913DC power adapter (optional)
- Warranty 1 Year
DOD
59 Hwagok-ro 61gil
Gangseo-gu, Seoul 07590
Republic of Korea
support@digitech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>