AEG FFB32617ZW Dishwasher User Manual

AEG FFB32617ZW Dishwasher

Product Information

The AEG dishwasher model FFB32617ZW has a range of features and functions to help you achieve perfect results every time. Some of the key features include:

• Multiple program options to suit different load types and soil levels
• Delay start function to allow for more convenient washing times
• Indicator lights for salt and rinse aid refill reminders
• AirDry function to help save energy and provide better drying results
• ExtraPower and ExtraHygiene options for tougher cleaning tasks

Product Usage Instructions

Safety Information
Before installing and using the AEG dishwasher, it is important to read the supplied instructions carefully. Only a qualified person should install the appliance. Always use original spare parts and ensure you have the model, PNC, and serial number available when contacting the Authorised Service Centre.

Installation
The AEG dishwasher should be installed by a qualified person. Ensure the appliance is level and properly grounded before use.

Electrical Connection
It is important to follow the electrical connection instructions provided in the user manual to avoid the risk of fire and electric shock.

Water Connection
Ensure the water connection is properly installed and the water supply meets the requirements stated in the user manual.

Product Usage
Load the dishwasher according to the instructions provided in the user manual. Select the appropriate program for the load type and soil level. Use the delay start function if desired, and ensure the salt and rinse aid dispensers are refilled when indicated by the indicator lights.

Product Maintenance
Regularly clean the dishwasher’s filters according to the instructions provided in the user manual. If any problems occur, consult the troubleshooting section of the user manual or contact the Authorised Service Centre.

Disposal
Dispose of the dishwasher and any packaging materials in accordance with local regulations to avoid the risk of injury or suffocation.

FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to:

• Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support.
• Register your product for better service: www.registeraeg.com
• Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop.

CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, and Serial Number. The information can be found on the rating plate.

• Warning / Caution-Safety information
• General information and tips
• Environmental information

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep detergents away from children.
• Keep children and pets away from the appliance when the door is open.
• Children shall not carry out cleaning and user maintenance of the appliance without supervision.

General Safety

• This appliance is for cleaning household-type dishes and tableware only.
• This appliance is designed for single-household domestic use in an indoor environment.
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodations where such use does not exceed (average) domestic usage levels.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa)
• Follow the maximum number of 13 place settings.
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
• WARNING: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.
• Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it.
• Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
• Do not use high-pressure water sprays and/or steam to clean the appliance.
• If the appliance has ventilation openings in the base, they must not be covered e.g. by a carpet.
• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused.

SAFETY INSTRUCTIONS

Installation

WARNING!
Only a qualified person must install this appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not install or use the appliance where the temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that meets installation requirements.

Electrical connection

WARNING!
Risk of fire and electric shock.

• Warning: this appliance is designed to be installed/connected to a grounding connection in the building.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only).

Water connection

• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the appliance.
• The water inlet hose has a safety valve and a sheath with an inner mains cable.

WARNING!
Dangerous voltage.

• If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.

Use

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
• Do not store items or apply pressure on the open door of the appliance.
• The appliance can release hot steam if you open the door while a programme operates.

Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
• Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: motor, circulation and drain pump, heaters and heating elements, including heat pumps, piping and related equipment including hoses, valves, filters and aquastops, structural and interior parts related to door assemblies, printed circuit boards, electronic displays, pressure switches, thermostats and sensors, software and firmware including reset software. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
• The following spare parts will be available for 10 years after the model has been discontinued: door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic peripherals such as baskets and lids.
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as other applications and are not suitable for household room illumination.

Disposal

WARNING!
Risk of injury or suffocation.

• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.

PRODUCT DESCRIPTION

1. Worktop
2. Upper spray arm
3. Lower spray arm
4. Filters
5. Rating plate
6. Salt container
7. Air vent
8. Rinse aid dispenser
9. Detergent dispenser
10. Cutlery basket
11. Lower basket
12. Upper basket
    • The graphic is a general overview. For more details, refer to other chapters or documents provided with the appliance.

CONTROL PANEL

1. On/off button
2. Program button
3. Programme indicators
4. Display
5. Delay button
6. Option button
7. Indicators
8. Start button

Indicators

PROGRAMMES

The order of the programmes in the table may not reflect their sequence on the control panel.

1. This programme offers the most efficient use of water and energy consumption for crockery and cut‐lery with normal soil. This is the standard programme for test institutes. This program is used to assess compliance with the Ecodesign Commission Regulation (EU) 2019/2022.
2. Automatic door opening during the drying phase. Refer to “Settings”.
3. The appliance senses the degree of soil and the number of items in the baskets. It automatically ad‐justs the temperature and the quantity of water, the energy consumption and the programme duration.
4. This programme is designed to clean the inside of the appliance effectively and efficiently. It removes limescale and grease buildup. The programme should be run at least once every 2 months with a desca‐ler or a cleaning product designed for dishwashers and without any load.
5. With this program, you can quickly rinse off food remains from dishes and prevent odours forming in the appliance. Do not use detergent with this programme.

Consumption values

1. The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
2. The values for programs other than ECO are indicative only.

Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according to: EN60436 ), send an email to: info.test@dishwasher- production.com In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance.

OPTIONS

• Desired options must be activated every time before you start a program.
• It is not possible to activate or deactivate options while a program is running.
• The option button toggles between the available options and their possible combinations.
• Not all options are compatible with each other. If you select noncompatible options, the appliance automatically deactivates one or more of them. Only the indicators of the still active options are on.
• If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out.
• Activating options can affect the water and energy consumption as well as the programme duration.

GlassCare
This option protects a delicate load, glassware in particular, from damaging. It prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C.

How to activate GlassCare

Press Option until the indicator is on. The display shows the updated programme duration.

ExtraPower
This option improves the dishwashing results of the selected programme. It increases the wash temperature and duration.

How to activate ExtraPower
Press Option until the indicator is on. The display shows the updated programme duration.

ExtraHygiene
This option provides better cleaning results by keeping the temperature between 65 and 70 °C for at least 10 minutes during the last rinsing phase.

How to activate ExtraHygiene
Press Option until the indicator is on. The display shows the updated programme duration.

As the appliance stores the saved settings, there is no need to configure it before every cycle.

How to set the programme selection mode
The appliance is in program selection mode when the program indicator ECO is on and the display shows the programme duration.

After activation, the appliance is in programme selection mode by default. If not, set the program selection mode the following way: Press and hold simultaneously Delay and Option until the appliance is in programme selection mode.

How to enter user mode
Make sure the appliance is in programme selection mode. To enter user mode, press and hold simultaneously Delay and Option until the indicators, and 90min flash and the display is blank.

The water
softener The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. Set the right level of the water softener to assure good washing results.

Water hardness

German de‐ grees (°dH)| French de‐ grees (°fH)| mmol/l| Clarke de‐ grees| Water softener lev‐ el
---|---|---|---|---
47 – 50| 84 – 90| 8.4 – 9.0| 58 – 63| 10
43 – 46| 76 – 83| 7.6 – 8.3| 53 – 57| 9
37 – 42| 65 – 75| 6.5 – 7.5| 46 – 52| 8
29 – 36| 51 – 64| 5.1 – 6.4| 36 – 45| 7
23 – 28| 40 – 50| 4.0 – 5.0| 28 – 35| 6
19 – 22| 33 – 39| 3.3 – 3.9| 23 – 27| 5 1)
15 – 18| 26 – 32| 2.6 – 3.2| 18 – 22| 4
11 – 14| 19 – 25| 1.9 – 2.5| 13 – 17| 3
4 – 10| 7 – 18| 0.7 – 1.8| 5 – 12| 2
<4| <7| <0.7| < 5| 1 2)

Factory setting.
Do not use salt at this level. Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active.
Multi-tabs containing salt are not effective enough to soften hard water.

Regeneration process
For the correct water softener operation, the resin of the softener device needs to be regenerated regularly. This process is automatic and is the part of the normal dishwasher operation. When the prescribed quantity of water (see values in the table) has been used since the previous regeneration process, a new regeneration process will be initiated between the final rinse and the program end.

In case of the high water softener setting, it may occur also in the middle of the programme, before the rinse (twice during a programme). Regeneration initiation has no impact on the cycle duration, unless it occurs in the middle of a programme or at the end of a programme with a short drying phase. In such cases, the regeneration prolongs the total duration of a programme by additional 5 minutes. Subsequently, the rinsing of the water softener that lasts 5 minutes may begin in the same cycle or at the beginning of the next programme. This activity increases the total water consumption of a programme by additional 4 litres and the total energy consumption of a programme by additional 2 Wh. The rinsing of the softener ends with a complete drain.

Each performed softener rinse (possible more than one in the same cycle) may prolong the programme duration by another 5 minutes when it occurs at any point at the  beginning or in the middle of a programme.

• All the consumption values mentioned in this section are determined in line with the currently applicable standard in laboratory conditions with water hardness 2.5mmol/L (water softener: level 3) according to the regulation: 2019/2022.
• The pressure and the temperature of water as well as the variations of the mains supply can change the values.

How to set the water softener level
Make sure the appliance is in user mode.

Make sure the appliance is in user mode.

1. Press Program.
   • The indicator still flashes.
   • The remaining indicators are off.
   • The display shows the current setting: e.g. = level 5.
2. Press Program repeatedly to change the setting.
3. Press the on/off button to confirm the setting.

The rinse aid empty notification
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the final rinse.
When the rinse aid chamber is empty, the rinse aid indicator turns on. If the drying results are satisfactory while using multi-tablets only, you can deactivate the notification for refilling the rinse aid. However, for best drying performance, always use rinse aid. 0If standard detergent or multi- tablets without rinse aid are used, activate the notification to keep the rinse aid refill indicator active.

How to deactivate the rinse aid empty notification
Make sure the appliance is in user mode.

1. Press Start.

AirDry
AirDry improves the drying results with less energy consumption. The appliance door opens automatically during the drying phase and remains ajar.

AirDry is automatically activated with all programs other than (if applicable). The duration of the drying phase and the door opening time vary depending on the selected program and options.

BEFORE FIRST USE

1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing residuals that can still be inside the appliance. Do not use

When AirDry opens the door, the display shows the remaining time of the running programme.

CAUTION!
Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. If, afterward, the door is closed for at least 3 minutes, the running programme ends.

CAUTION!
If children have access to the appliance, we advise deactivating AirDry. The automatic opening of the door may pose a danger.

How to deactivate AirDry
Make sure the appliance is in user mode.

1. Press Delay.
   • The indicator 90 min still flashes.
   • The remaining indicators are off.
   • The display shows the current setting:
   • AirDry is deactivated.
   • AirDry is activated.
2. Press Delay to change the setting.
3. Press the on/off button to confirm the setting. detergent and do not put dishes in
   the baskets. After starting the program, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically.

The salt container

CAUTION!
Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container counterclockwise and remove it.
2. Put 1 litre of water in the salt container (only for the first time).
3. Fill the salt container with 1 kg of salt (until it is full).
4. Carefully shake the funnel by its handle to get the last granules inside.
5. Remove the salt around the opening of the salt container.
6. Turn the cap of the salt container clockwise to close the salt container.
   CAUTION!
   Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion.

How to fill the rinse aid dispenser

CAUTION!
Compartment (A) is for rinse aid only. Do not fill it with detergent.

CAUTION!
Only use rinse aid designed specifically for dishwashers.

1. Press the release button (D) to open the lid (C).
2. Fill the dispenser (A) until the rinse aid reaches the marking ”MAX”.
3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the release button locks into position.
   • You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity).

DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the appliance.
   Make sure that the appliance is in programme selection mode.

   • If the salt indicator is on, fill the salt container.
   • If the rinse aid indicator is on, fill the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start a programme suitable for the type of load and the degree of soil.

Using the detergent

CAUTION!
Only use detergent specifically designed for dishwashers.

1. Press the release button (B) to open the lid (C).
2. Put the detergent, in powder or tablets, in compartment (A).
3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door.
4. Close the lid. Make sure that the release button locks into position.
   • For information about the detergent dosage, refer to the manufacturer’s instructions on the packaging of the product. Usually, 20 – 25 ml of gel detergent is adequate for washing a load with normal soil.
     Do not fill compartment (A) with more than 30 ml of gel detergent.

Setting and starting a programme

The Auto-off function
This function decreases energy consumption by deactivating automatically the appliance when it is not operating.

The function comes into operation:

• When the program is complete.
• After 5 minutes if a programme was not started.

Starting a programme

Starting a programme with delay start

1. Set a programme.
2. Press Delay repeatedly until the display shows the desired delay time (from 1 to 24 hours).
3. Press Start to begin the countdown.
   • The indicator is on.
   • The remaining time counts down in hours. The final hour is displayed in minutes.

When the countdown is completed, the program starts and the indicator of the running phase is on. The indicator is off.

Opening the door while the appliance operates
Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function. Do not try to close the appliance door within 2 minutes after AirDry automatically opens it as this may cause damage to the appliance. If, afterwards, the door is closed for at least 3 minutes, the running programme ends.

Cancelling the delay start
while the countdown operates When you cancel the delay start you have to set the programme and options again.
Press simultaneously Delay and Option until the appliance is in programme selection mode.

Cancelling the program
Press and hold simultaneously Delay and Option until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new program.

End of the programme
When the programme is complete, the Auto off function switches the appliance off automatically. All buttons are inactive except for the on/off button. Close the water tap.

HINTS AND TIPS

General
Follow the hints below to ensure optimal cleaning and drying results in daily use and to protect the environment.

• Washing dishes in the dishwasher as instructed in the user manual usually consumes less water and energy than washing dishes by hand.
• Load the dishwasher to its full capacity to save water and energy. For best cleaning results, arrange items in the baskets as instructed in the user manual and do not overload the baskets.
• Do not pre-rinse dishes by hand. It increases the water and energy consumption. When needed, select a programme with a prewash phase.
• Remove larger residues of food from the dishes and empty cups and glasses before putting them inside the appliance.
• Soak or slightly scour cookware with firmly cooked-on or baked-on food before washing it in the appliance.
• Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes.
• You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. ”All in 1”). Follow the instructions on the packaging.
• Select a programme according to the type of load and the degree of soil. eso offers the most efficient use of water and energy consumption.
• To prevent limescale buildup inside the appliance:
  • Refill the salt container whenever necessary.
  • Use the recommended dosage of the detergent and rinse aid.
  • Make sure that the current level of the water softener agrees with the hardness of the water supply.
  • Follow the instructions in the chapter “Care and cleaning”.

Using salt, rinse aid and detergent

• Only use salt, rinse aid and detergent designed for dishwasher. Other products can cause damage to the appliance.
• In areas with hard and very hard water, we recommend to use basic dishwasher detergent (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal cleaning and drying results.
• Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use tablets with long programmes.
• Always use the correct quantity of detergent. Insufficient dosage of detergent can result in poor cleaning results and hard-water filming or spotting on the items. Using too much detergent with soft or softened water results in detergent residues on the dishes. Adjust the amount of detergent based on the water hardness. Refer to the instructions on the detergent packaging.
• Always use the correct quantity of rinse aid. Insufficient dosage of rinse aid decreases the drying results. Using too much rinse aid results in bluish layers on the items.
• Make sure that the water softener level is correct. If the level is too high, the increased quantity of salt in the water might result in rust on cutlery.

What to do if you want to stop using multi-tablets
Before you start to use separately detergent, salt and rinse aid, complete the following steps:

1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers are full.
3. Start the shortest programme with a rinsing phase. Do not add detergent and do put dishes in the baskets.
4. When the programme is complete, adjust the water softener according to the water hardness in your area.
5. Adjust the released quantity of rinse aid.
6. Activate the rinse aid empty notification.

Loading the baskets

• Always use the whole space of the baskets.
• Use the appliance to wash dishwasher-safe items only.
• Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper as they could crack, warp, get discolored or pitted.
• Do not wash in the appliance items that can absorb water (sponges, household cloths).
• Put hollow items (cups, glasses and pans) with the opening facing downwards.
• Make sure that glass items do not touch each other.
• Put light items in the upper basket. Make sure that the items do not move freely.
• Put cutlery and small items in the cutlery basket.
• Move the upper basket upwards to accommodate large items in the lower basket.
• Make sure that the spray arms can move freely before you start a programme.

Before starting a program
Before you start the selected program, make sure that:

• The filters are clean and correctly installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid (unless you use multi-tablets).
• The arrangement of the items in the baskets is correct.
• The programme is suitable to the type of load and the degree of soil.
• The correct quantity of detergent is used.

Unloading the baskets

1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged.
2. First remove items from the lower basket, then from the upper basket.
   • After the programme is completed, water can still remain on the inside surfaces of the appliance.

CARE AND CLEANING

WARNING!

• Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket.
• Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them.

Internal cleaning

• Clean the appliance interior with a soft damp cloth.
• Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourers or solvents.
• Wipe clean the door, including the rubber gasket, once a week.
• To maintain the performance of your appliance, use a cleaning product designed for dishwashers at least once every two months. Carefully follow the instructions on the packaging of the product.
• Use the automatic cleaning program for optimal cleaning results.
• Using short-duration programs regularly can cause grease and limescale buildup inside the appliance. Run long-duration programmes at least twice a month to prevent the buildup.

Removal of foreign objects
Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump.

CAUTION!
If unable to remove the foreign objects, contact an Authorised Service Centre.

1. Disassemble the filters system as instructed in this chapter.
2. Remove any foreign objects manually.
3. Reassemble the filters as instructed in this chapter.

External cleaning

• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.

Cleaning the filters
The filter system is made of 3 parts.

1. Turn the filter (B) counterclockwise and remove it.
2. Remove filter (C) from filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues of food or soil in or around the edge of the sump.
6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks.

CAUTION!
An incorrect position of the filters can cause bad washing results and damage to the appliance.

Cleaning the lower spray arm
We recommend cleaning the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.

1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes.
3. To install the spray arm back, press it downwards.

Cleaning the upper spray arm
Do not remove the upper spray arm. If the openings in the spray arm are clogged, remove the remaining particles of soil with a thin pointed object, e.g. a toothpick.

TROUBLESHOOTING

Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel.

The majority of problems that may occur can be solved without the need to contact an Authorised Service Centre.
Refer to the below table for information on possible problems. With some problems, the display shows an alarm code.

connected to the mains socket.

•      Make sure that there is no damaged fuse in the fuse box.

The programme does not start.| •      Make sure that the appliance door is closed.

•      Press the start button.

•      If the delay start is set, cancel the setting or wait for the end of the countdown.

•      The appliance recharges the resin inside the water soft‐ ener. The duration of the procedure is approximately 5 minutes.

The appliance does not fill with water.

The display shows i10 or

i11.

| •      Make sure that the water tap is open.

•      Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.

•      Make sure that the water tap is not clogged.

•      Make sure that the filter in the inlet hose is not clogged.

•      Make sure that the inlet hose has no kinks or bends.

The appliance does not drain the water.

The display shows i20.

| •      Make sure that the sink spigot is not clogged.

•      Make sure that the interior filter system is not clogged.

•      Make sure that the drain hose has no kinks or bends.

The anti-flood device is on. The display shows i30.| •      Close the water tap.

•      Make sure that the appliance is correctly installed.

•      Make sure the baskets are loaded as instructed in the user manual.

Malfunction of the water lev‐ el detection sensor.

The display shows i41 – i44.

| •      Make sure that the filters are clean.

•      Switch the appliance off and on.

Malfunction of the wash| •      Switch the appliance off and on.
pump or the drain pump.|
The display shows i51 – i59|
or i5A – i5F.|
The temperature of the wa‐| •      Make sure that the temperature of the inlet water does
ter inside the appliance is| not exceed 60°C.
too high or malfunction of| •      Switch the appliance off and on.
the temperature sensor oc‐|
curred.|
The display shows i61 or|
i69.|
Technical malfunction of the| •      Switch the appliance off and on.
appliance.|
The display shows iC0 or|
iC3.|
Problem and alarm code| Possible cause and solution
---|---
The level of water inside the| •      Switch the appliance off and on.
appliance is too high.| •      Make sure that the filters are clean.
The display shows iF1.| •      Make sure that the outlet hose is installed at the right
 | height above the floor. Refer to the installation instruc‐
 | tions.
The appliance stops and starts more times during op‐ eration.| •      It is normal. It provides optimal cleaning results and en‐ ergy savings.
The programme lasts too long.| •      If the delayed start is set, cancel the delay setting or wait for the end of the countdown.
The displayed programme duration is different than the duration in the consumption values table.| •      The pressure and the temperature of the water, the var‐ iations of the mains supply, the options, the quantity of dishes and the degree of soil can change the pro‐ gramme duration.
The remaining time in the| •      This is not a defect. The appliance is working correctly.
display increases and skips|
nearly to the end of pro‐|
gramme time.|
Small leak from the appli‐ ance door.| •      The appliance is not levelled. Loosen or tighten the ad‐ justable feet (if applicable).

•      The appliance door is not centred on the tub. Adjust the rear foot (if applicable).

The appliance door is diffi‐ cult to close.| •      The appliance is not levelled. Loosen or tighten the ad‐ justable feet (if applicable).

•      Parts of the tableware are protruding from the baskets.

The appliance door opens during the wash cycle.| •      The AirDry function is activated. You can deactivate the function. Refer to “Settings”.
Rattling/knocking sounds from inside the appliance.| •      The tableware is not properly arranged in the baskets. Refer to basket loading leaflet.

•      Make sure that the spray arms can rotate freely.

The appliance trips the cir‐ cuit-beaker.| •      The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian‐ ces in use.

•      Internal electrical fault of the appliance. Contact an Au‐ thorised Service Centre.

Refer to “Before first use”, “Daily use”, or “Hints and tips” for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre.

WARNING!
We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly.

The dishwashing and drying results are not satisfactory

Problem Possible cause and solution

Poor washing results.                 • Refer to “Daily use” , “Hints and tips” and the basket

loading leaflet.

•      Use more intensive washing programme.

•      Activate the ExtraPower option to improve the washing results of a selected programme.

•      Clean spray arm jets and filter. Refer to “Care and

Cleaning”.

Poor drying results.                    •  Tableware was left for too long inside the closed appli‐

ance. Activate the function AirDry to set the automatic opening of the door and to improve the drying perform‐ ance.

•      There is no rinse aid or the dosage of rinse aid is not sufficient. Fill the rinse aid dispenser or set the dosage of rinse aid to a higher level.

•      The quality of the rinse aid can be the cause.

•      Always use rinse aid, even with multi-tablets.

•      Plastic items may need to be towel dried.

•      The programme does not have the drying phase. Re‐ fer to “Programmes overview”.

There are whitish streaks or      • The released quantity of rinse aid is too high. Adjust bluish layers on glasses and           the rinse aid dosage to a lower level.

dishes.                                       •  The quantity of detergent is too high.

There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes.         just the rinse aid dosage to a higher level.

•      The quality of the rinse aid can be the cause.

The interior of the appliance is • This is not a defect of the appliance. Humidity conden‐ wet.                                                 sates on the appliance walls.
Unusual foam during washing. •  Use the detergent designed specifically for dishwash‐

ers.

•      Use a detergent from a different manufacturer.

•      Do not pre-rinse dishes under running water.

Problem Possible cause and solution

Traces of rust on cutlery.           •  There is too much salt in the water used for washing.

Refer to “The water softener”.

•      Silver and stainless steel cutlery were placed together. Do not place silver and stainless steel items close to‐ gether.

There are residues of deter‐      • The detergent tablet was stuck in the dispenser and gent in the dispenser at the             was not washed away by water.

end of the programme.               •  Water cannot wash away the detergent from the dis‐

penser. Make sure that the spray arms are not blocked or clogged.

•      Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening.

Odours inside the appliance.     • Refer to “Internal cleaning”.

•      Start the  programme with a descaler or a cleaning product designed for dishwashers.

Limescale deposits on the ta‐    • The level of salt is low, check the refill indicator. bleware, on the tub and on the • The cap of the salt container is loose.

inside of the door.                       •  Your tap water is hard. Refer to “The water soften‐

er”.

•      Use salt and set regeneration of the water softener even when multi- functional tablets are used. Refer to “The water softener”.

•      Start the  programme with a descaler designed for dishwashers.

•      If limescale deposits persist, clean the appliance with the suitable detergents.

•      Try a different detergent.

•      Contact the detergent manufacturer.

Dull, discoloured or chipped      • Make sure that only dishwasher-safe items are wash‐ tableware.                                       ed in the appliance.

•      Load and unload the basket carefully. Refer to the basket loading leaflet.

•      Place delicate items in the upper basket.

•      Activate the GlassCare option to ensure special care for glassware and delicate items.

Refer to “Before first use”, “Daily use”, or “Hints and tips” for other possible causes.

TECHNICAL INFORMATION

Dimensions Width/height / depth (mm)          598 / 850 / 622

1. Refer to the rating plate for other values.
2. If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.

Link to the EU EPREL database
The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.

It is possible to find information related to the performance of the product in the EU EPREL database using the link https://eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. Refer to the chapter “Product Description”. For more detailed information about the energy label, visit www.theenergylabel.eu.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with household waste. Return the product to your local recycling facility or contact your municipal office.

www.aeg.com/shop

Documents / Resources

| AEG FFB32617ZW Dishwasher [pdf] User Manual
FFB32617ZW Dishwasher, FFB32617ZW, Dishwasher
---|---

References

• Check out our sponsor - Spency.tv
• Welcome to AEG
• AEG - aeg.com
• Product Support | AEG

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>