IDOBAO ID67PLUS Three Mode Assembled MX Mechanical Keyboard Instruction Manual

IDOBAO ID67PLUS Three-Mode Assembled MX Mechanical Keyboard

Product Information

• Model: ID67 PLUS
• Bluetooth: IDOBAO – C1/C2/C3/C4/
• Backlight: RGB-LED
• Material: Body case – Aluminum; Keycaps – ABS;
• Battery   capacity: 4000mAh
• Connection mode: Wired/Bluetooth 5.2
• Keys: 67keys
• Switch support: MX Switches (3pins & 5pins)
• Interface: USB Type-C
• Size: 121.19mm323.06mm42.61mm
• Weight: 1360g
• Packing List: Keyboard kit, cable, Keycap puller, Switchpuller, Instruction manual

Product Usage Instructions

Switching of Connection Modes

The ID67 PLUS keyboard supports wired and Bluetooth connection modes. To switch between these modes:

• Wired mode: Press FN + ESC to switch to wired mode.
• Bluetooth mode: Press FN + a number key (1-6) to turn on Bluetooth mode. The corresponding number key will turn on a blue light.

To connect the keyboard to a Bluetooth device:

1. Search for IDOBAO and connect with your device.
2. The keyboard supports up to six Bluetooth channels. To switch between Bluetooth devices, use the following key combinations:
   • FN + 1: Switch to Bluetooth device 1
   • FN + 2: Switch to Bluetooth device 2
   • FN + 3: Switch to Bluetooth device 3
   • FN + 4: Switch to Bluetooth device 4
   • FN + 5: Switch to Bluetooth device 5
   • FN + 6: Switch to Bluetooth device 6

Other Key Combinations

• FN + L: Turn On/Off RGB lights
• FN + /: Switch the RGB effects
• FN + Increase the RGB brightness
• FN + Decrease the RGB brightness
• FN + Q: Reset Bluetooth connection record
• FN + G: Switch to gaming mode (Lock up WIN key)

Restart the Keyboard

If the keyboard is unresponsive, follow these steps to restart it:

1. Pull off the keycap of the CAPS key.
2. Turn off and on the power switch beside the key.

Note: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Switching of connection modes

• Wired mode: FN + ESC switch to wired mode
• Bluetooth mode : FN + number keys (as in the picture below)
• As the corresponding number key turns on blue light, switch on to Bluetooth mode

Bluetooth connection

• Search Bluetooth “IDOBAO” and connect with your device;
• This keyboard support 6 Bluetooth channel, with the key combination of:
• FN + 1 switch to Bluetooth device 1
• FN + 2 switch to Bluetooth device 2
• FN + 3 switch to Bluetooth device 3
• FN + 4 switch to Bluetooth device 4
• FN + 5 switch to Bluetooth device 5
• FN + 6 switch to Bluetooth device 6

Other key combination

• FN + L Turn On/Off RGB lights
• FN + ←/→ Switch the RGB effects
• FN + ↑ Increase the RGB brightness
• FN + ↓ Decrease the RGB brightness
• FN + Q Reset Bluetooth connection record
• FN + G Switch to gaming mode (Lock up WIN key)

Restart the Keyboard:

• In the case of the keyboard in no response state,
• Pull off the keycap of the CAPS key,
• Turn off and on the power switch beside the key, to restart the keyboard

Product Warranty

• Customers can obtain after-sales service using IDOBAO mechanical keyboard products to:
• In the time of 8-30 days (Starting from the second day of delivery time), If this product has initiative performance failure, and is confirmed by the IDOBAO after-sales team, we will provide repair and replacement service.
• In the time of 1 year (Starting from the second day of delivery time), If this product has initiative performance failure, and is confirmed by the IDOBAO after-sales team, we will provide repair service.
• Non-warranty regulations
• Unauthorized repair, bump, oversight, misuse, water seepage, accident, tear, paint alter;
• Out of warranty time;
• Other damages.
• Contact us
• Official website: www.idobao.net
• Customer service: customer-service@idobao.net
• Discord channel:

FCC

• This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, a
2. this device must accept any interference received, including interference that may cause undesired operation.

• Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Note: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable devices:

• The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.

References

• Custom mechanical keyboards maker – idobao

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>