madison Rechargeable Vintage Radio User Manual

: June 7, 2024
: madison

Table of Contents

Important Safety instructions and danger warnings
Contents of the carton
CHARGING THE BATTERY
LOCATION OF CONTROLS
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Madison Rechargeable Vintage Radio User Manual

madison Rechargeable Vintage Radio User Manual

RECHARGEABLE VINTAGE RADIO WITH BLUETOOTH & FM RADIO 30W
INSTRUCTION MANUAL

Please read the manual carefully and keep it for future reference.

Accordance with the requirements of CE standard
The product is for indoor use only

Important Safety instructions and danger warnings

All safety instructions and warnings must be adhered to. They are part of the manual and must be kept with the manual.
The appliance is approved for operation in dry, closed rooms only Do not operate the device nearby water, such as in bathrooms or nearby swimming pools.
The appliance may not be exposed to extreme temperatures (< +5°C / > +35°C) in operation.
The appliance may not be subjected to strong vibrations or heavy mechanical strain.
The appliance may not be exposed to excessive moisture (due to dripping or sprayed water, for example).
Do not place any recipients filled with liquids, such as glasses or vases, on top of or directly next to the appliance. They could fall over, causing water to enter the appliance. Never pour out liquids above the appliance. Do not place any small objects, such as coins or paper clips, on the appliance since they could fall inside the appliance.
Never place the appliance on an unstable or movable surface. Persons could be injured or the appliance damaged by it falling down.
Do not place any naked flames such as those of burning candles on or next to the appliance.
Only use the appliance in a moderate climate, not in tropical environments.

Contents of the carton

1x vintage radio
1x USB charger lead
1x 3.5mm AUX lead
1x manual

RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but deposited in separate collection points for recycling.

WARNING
Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type. Keep new and old batteries out of the reach of children. If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children.

CHARGING THE BATTERY

Plug the mini-USB connector of the USB charging lead into the 5V DC socket on the rear panel of the radio and the other end into a suitable USB port or a mains adaptor.
NOTE: Please shut down the power switch after you have finished using the system.

IMPORTANT NOTE ON LITHIUM-ION BATTERIES

PRIOR to using the unit for the first time, please charge fully the battery
Charge the battery regularly after each use. Don’t wait until it is discharged!
DON’T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will become impossible to recharge the battery!
If you don’t use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity and check/ charge it once per month.

** BATTERIES ARE NOT COVERED BY THE WARRANTY We cannot be held responsible for damaged batteries further to the non-observance of these basic rules.**

LOCATION OF CONTROLS

Front panel

TUNER Dial: Tune FM stations
Bluetooth LED Indicator
Auxiliary/FM Input LED Indicator
[VOL]Dial: Adjust volume Rear Panel
FM Antenna
[POWER] Switch
Charging LED Indicator
3.5mm Auxiliary Input Jack
USB Charging Port
Mode Button: Change input mode (Bluetooth /FM Tuner/Auxiliary)

FM Function
For best reception, extend the FM antenna. You may need to adjust or position the antenna for certain stations.
Use the [TUNER] dial to tune to FM radio stations.

Pairing the speaker with a Bluetooth enabled device
Keep the speaker and the Bluetooth device within 1m of each other during the pairing process. Slide the ON/OFF switch (6) to the ON position and press the MODE button (10). The Bluetooth LED indicator will flash quickly in blue. Set your mobile phone or other Bluetooth enabled device to search for Bluetooth devices. When the Bluetooth device finds the device, select “FREESOUND-VR30 “. After successful pairing, a tone will be heard and the Bluetooth LED indicator will slowly flash blue.
(If a previously paired device is within the range when the speaker is turned ON, the speaker will connect to itautomatically).

Using as a Wired Speaker
To use the speaker as a wired device, plug one end of the 3.5 auxiliary lead into the AUX jack on the back panel of the unit and the other end into your device or computer’s headphone jack. Use the volume control to set the desired volume.

Specifications

Output power …..30W
S/N ratio ….. >65dB
Frequency range …..80Hz - 18kHz
Bluetooth version …..5.0
Transmission frequency …..2402-2480MHz
Max. RF output power: …..-0.33dBm
FM band ….. 87.5-108MHz
Input power…….. 5V =1A
Battery ….. Lithium 3.7V 1500mAh
Dimensions ….. 210 x 80 x 160mm
Weight……. 0.635kg

Correct disposal of the product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

EU Declaration of Conformity

Hereby we,
LOTRONIC SA Avenue Zenobia Gramm, 9 1480 SAINTES Belgique +32.2.390.91.91

Certify and declare under our sole responsibility that the following product:

Trade name: Madison
Product name: BLUTOOTH VINTAGE RADIO SPEAKER
Type or model: FREESOUND-VR30

Conforms to the essential requirements of the RED directive 2014/53/EU, 2011/65/EU RoHS directive and the Commission Delegated Directive (EU) 2015/863

Based on the following specifications applied:

EN 62368-1 : 2014 + A11 : 2017
EN 62479 : 2010
EN 50663 : 2017
ETSI EN 301 489-1 V2.2.3 : 2019-11
ETSI EN 301 489-17 V3.1.1 : 2017-02
EN 55032 : 2015
EN 55035 : 2017
EN 61000-3-2 : 2014
EN 61000-3-3 : 2013
ETSI EN 300 328 V2.2.2 : 2019-07
ETSI EN 303 345-1 V1.1.1 : 2019-06
ETSI EN 303 3454-3 V1.1.0 : 2019-11
IEC 62321-3-1 : 2013
IEC 62321-4 : 2013+AMD1 : 2017
IEC 62321-5 : 2013
IEC 62321-6 : 2015
IEC 62321-7-1 : 2015
IEC 62321-7-2 : 2017
IEC 62321-8 : 2017