SEALEY 9106L-12 PVC Knit Wrist Gloves Instruction Manual
- June 1, 2024
- SEALEY
Table of Contents
SEALEY 9106L-12 PVC Knit Wrist Gloves Instruction Manual
1. INTRODUCTION
Knitted wrist waterproof gloves with PVC coating palm and back for excellent protection against abrasion. Wide-ranging applications, as waterproof coating repels oil, grease and non-corrosive liquids. CE Marked and conforms to BS EN 388:2016 3-1-2-1-X.
Notified Body: 0075
Type Examination Certificate Number: 0075/1022/162/10/19/3123
Carried Out By: CTC Groupe
Sizes: 9106L (Large), 9106XL (Extra-Large)
2. SAFETY
✔ Gloves should not be worn when there is a risk of entanglement by moving
parts of machines.
✔ This model does not contain any substances at levels that are known to, or
suspected to, adversely affect user hygiene or health.
✔ The protection against risks or hazards which are not mentioned in this
document is not warranted.
✔ The levels of performance mentioned are only valid for the palm of the
glove.
✔ These levels of performance are obtained from the tests done according to
the conditions defined by the applicable standards.
✔ This glove shall not be in contact with fire.
✔ Before use, the glove shall be visually controlled. In case of deterioration
the gloves must be scrapped (abrasion, cut, tear, …).
✔ For gloves with two or more layers of material, the performance levels are
warranted only for the whole glove.
✔ For gloves with two or more layers the overall classification does not
necessarily reflect the performance of the outermost layer.
3. APPLICABLE STANDARDS
4. MAINTENANCE
4.1. MAINTENANCE
✔ The gloves should be inspected before each use, and replaced if damaged.
4.2. STORAGE
✔ Store the gloves in their original packaging.
✔ Store the gloves in normal temperature and humidity conditions.
✔ Store the gloves in clean, covered and ventilated premises.
4.3. OBSOLESCENCE
✔ When stored in appropriate conditions, performance of this product will not be significantly reduced by aging.
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.https://qrco.de/bcy2E9
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68
Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds,
Suffolk. IP32 7AR
[email protected]
www.sealey.co.uk
© Jack Sealey Limited Original Language Version 9106L, 9106L/12, 9106L/B120, 9106XL, 9106XL/12, 9106XL/B120