Z21 10863 Signal Descorder Switch User Guide
- June 3, 2024
- Z21
Table of Contents
Z21 10863 Signal Descorder Switch
Quick guide
Programming button in normal mode:
- Press and hold until “Program” flashes (for at least 3 s): Configuration mode
- Press and hold until all LEDs illuminate (for at least 8 s): Resetting to factory settings
Programming button in configuration mode:
-
Press briefly:
To change the setting (for option 2 and 3) -
Hold down until “Status” flashes blue (for at least 3 s):
Next option
Option 1:
- Switch the accessory item (e.g. point command) with the desired address
- Address is adopted from the Z21 switch DECODER
Option 2:
The number of signals can be changed by briefly pressing the programming
button.
Option 3:
The addressing mode can be changed by briefly pressing the programming button.
The Z21 signal DECODER is a universal DCC decoder for 2 to 4 complex light signals with a common plus. Depending on the complexity of the light signals used, 2 to 4 different signals can be connected flexibly.
- 2 signals: 8 outputs can be used per signal.
- 3 signals: 1 signal with 8 outputs can be used. Two additional signals with 4 outputs can be used additionally.
- 4 signals: 4 outputs can be used per signal.
In addition to an all-purpose default configuration, numerous other predefined
signal configurations from different countries are available in the Z21 signal
DECODER.
How to select those signal configurations and how to connect your signals, can
be found in the manual at www.z21.eu/en/products/z21-signal-
decoder.