Shenzhen Kaka Interconnect Technology Co Ltd K99 3 In 1 Wireless Charger User Manual
- May 21, 2024
- Shenzhen Kaka Interconnect Technology Co Ltd
Table of Contents
Shenzhen Kaka Interconnect Technology Co Ltd K99 3 In 1 Wireless Charger
Product Information
This device is compliant with the FCC RF radiation exposure limits set for an uncontrolled environment. The device is a transmitter that must not be co- located or operating in conjunction with any other antenna or transmitter. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected to ensure proper radiation exposure limits.
Product Usage Instructions
- Ensure that the device is not co-located or operating with any other antenna or transmitter.
- During the operation of the device, maintain a distance of 15 cm surrounding the device and 20 cm above the top surface of the device.
- Follow all other usage instructions provided in the user manual to ensure safe and proper use of the device.
Product Introduction
This three in one wireless charger is a compact charging base that is powered
by only one cable and can wirelessly connect three devices simultaneously
charge. When charging your phone, Apple watch, Airpos2, Airpods pro, or other
parts of the TWS Bluetooth headphone case You can automatically align wire
less charging at the corresponding charging body position, making your desktop
cleaner and life more convenient. This product design is very space saving and
can help you organize your electronic devices well. In addition, the light
halo is trendy and dazzling, and the phone light The light is green, the
earphones are blue, and the phone earphones are also blue green.
Appearance
Usage method
- After turning on the power, the Three in one charging device enters standby mode.
- Place the charging product and enter the charging state of the Three in one charging device.
- Remove the product and restore the Three in one charging device to standby mode.
- When an abnormality occurs, the Three in one charging device automatically shuts down for protection.
- Night light effect, Touch switch
- Automatic tracking infrared + automatic tracking system
Intelligent charging light color status
- Green glow : Charging the phone in green state
- Blue glow : Charging head phones in blue state
- Green and blue emitting simultaneously: simultaneous charging of headphones and phones.
Frequently asked questions
-
Do not charge the phone when placed on it The phone is not aligned with the charging sensing area or the receiving coil is not properly installed
-
Charging heating
It is normal for the receiving coil or transmitting board to generate heat during wireless charging. -
Intermittent phone charging
-
USB charging head adapter) Insufficient charging current or unstable voltage, please use a qualified charging head.
-
The charging position is too biased and the electromagnetic induction is not good. The charging position can be adjusted.
-
Charging is relatively slow
The amount of wireless charging current allowed by the phone itself or the peripheral receiving coil varies. Or mobile phone When charging, standby power consumption is high. It is recommended to reduce the phone’s standby program. -
Other issues
Please contact the after-sales service directly for consultation.
Safety instructions
- Do not forcefully pull on the power cord to avoid it breaking or falling off.
- Do not disassemble or put the Three in one charging device into fire or water to avoid short circuit and leakage.
- Do not use the Three in one charging device in severe high temperature, humidity, or corrosive environments to avoid damage
- Leakage occurs in the faulty circuit.
Chassis halo light status
Gently touch t he light sign below t he display light to turn it on and off.
Product specifications
- Product name : Three in one wireless charging
- Net weigh t: 155G
- Input :SV/9 Vl 2V 3A
- Output watch : 3W
- Output headphones: SW
- Output phone : SW 7.SW lOW 15W
- Package size : 13xl2.3x7cm
- Housing material : ABS, PC fireproof material
- Product color : White Black
- Product Certification : certificate Qi\CE\FCC\RoHS
Note
- Please use a qualified USB power adapter, otherwise it may cause unstable charging.
- Do not place metal debris or magnetic card s on the charging board, as it may cause damage or abnormalities to the charger.
- If the receiving coil or transmitting board overheats and stops charging during use, please remove it Charge the product, wait for it to cool down and try charging again .
FCC Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions , may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>