EXSYS EX-13002 USB Serial Converter User Manual

EXSYS EX-13002 USB Serial Converter

Product Information:

The product is a USB 2.0 A-Plug with pin connectors for signal and power transmission. It has two pins for signal transmission, namely DATA- and DATA+, and one pin for power transmission, namely VCC. The connector also has a GND pin for grounding. The product comes with a user manual that provides detailed information on the product’s connectors and status LED’s.

Product Usage Instructions:

1. For cleaning the product, use only a dry fluff-less cloth and remove dirt with gentle pressure. Ensure that no fibers from the cloth remain in the connectors. Never use a moist or wet cloth for cleaning.
2. To install the product, connect the EX-13002 USB to the USB A-Port on your PC.
3. Refer to your computer’s reference manual whenever in doubt.
4. To continue with driver installation, start your PC and follow the instructions provided in the manual.

LAYOUT

DESCRIPTION & TECHNICAL INFORMATION

The EX-13002 is a module for converting USB 2.0 to RS-232 interface with FIFO 16C550 port for connecting high speed serial RS-232 peripheral devices (e.g. modem, plotter etc.). The EX-13002 is equipped with a USB 2.0 A-Plug for connection to the PC and a RS-232 serial 9 pin connector for terminal devices. The USB module is hot plug & play capable. No jumpers and settings are required for I/O address and interrupt settings, as the settings are automatically made by the system BIOS and when the operating system is installed.

• Compatibility: USB 1.1, 2.0 & 3.2
• Operating Systems: Windows 9.x / ME / 2000 / XP / Vista / 7 / 8.x / 10 / 11 / Server 20xx/ Linux / MAC
• Connectors: 1x USB 2.0 A-Plug, 1x 9 Pin Serial RS-232 Connector
• Extent of delivery: EX-13002, Manual

CONNECTORS & STATUS LED‘S

DB 9M

9 Pin Serial RS-232 Connector

Pin| Signal| Pin| Signal
1| DCD| 6| DSR
2| RXD| 7| RTS
3| TXD| 8| CTS
4| DTR| 9| RI
5| GND|

RS-232 Cable Wiring

CONNECTORS & STATUS LED‘S

USB 2.0 A-Plug

Pin| Signal| Pin| Signal
1| VCC| 3| DATA+
2| DATA-| 4| GND

HARDWARE INSTALLATION

Because there are large differences between PC’s, we can give you only a general installation guide for the EX-13002. Please refer your computer’s reference manual whenever in doubt.

1. Connect the EX-13002 USB to the USB A-Port at your PC.
2. When you are ready you can start your PC and continue with the point „Driver Installation“.

DRIVER INSTALLATION

Windows
After the hardware installation Windows will recognize the device automatically and install the drivers. If the driver shoul not be installed automatically, please download the driver from our homepage (www.exsys- shop.de) first. Now select the folder with your operating system and install the driver. Follow the hardware assistant and finish the installation. Important! Restart your PC in any case after installing the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ports (COM & LPT)“ the following new entry:

If you see this or similar information the device is installed correctly.

CLEANING

For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In the area of the connectors please make sure that no fibres from the cloth remain in the connectors. Never use a moist or wet cloth for cleaning!

Germany:
EXSYS Vertriebs GmbH
Industriestrasse 8
61449 Steinbach
www.exsys.de 

References

• Exsys Online Shop DE
• EXSYS Shop Schweiz
• Exsys Online Shop DE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>