SCARLETT SC-HD70I32 Hair Dryer Instruction Manual
- June 12, 2024
- SCARLETT
Table of Contents
SCARLETT SC-HD70I32 Hair Dryer
Product Information
- Model: SC-HD70I32
- Type: Hair Dryer
- Description: This hair dryer comes with various features including a concentrator, cool shot button, heat setting switch, speed setting switch, hanging loop, handle, cord swivel protection, and an air inlet removable lattice.
- Voltage: 220-240 V~
- Frequency: 50 Hz
- Power: 2000-2400 W
- Weight: 0.6 / 0.7 kg
- Dimensions: 167.594276 mm
Product Usage Instructions
Attention: Do not use the device beside the bathrooms, swimming pools, and other vessels containing water.
- Connect the hair dryer to a power source with a voltage of 220-240 V~ and frequency of 50 Hz.
- Adjust the heat setting switch and speed setting switch according to your preference.
- To use the concentrator, attach it to the housing of the hair dryer.
- Press the COOL SHOT button to activate the cool shot function.
- Ensure the cord swivel protection is in place to prevent tangling of the power cord.
- Use the hanging loop to conveniently hang the hair dryer when not in use.
- When necessary, clean the air inlet removable lattice to maintain optimal airflow.
For proper disposal of the hair dryer, refer to local authority guidelines for electronic waste disposal. Improper disposal may have negative effects on public health and the environment.
For more information, visit www.scarlett.ru.
INSTRUCTION
PRODUCT DESCRIPTION
- Concentrator
- Housing
- COOL SHOT button
- Heat setting switch
- Speed setting switch
- Hanging loop
- Handle
- Cord swivel protection
- Air inlet removable lattice
IMPORTANT SAFEGUARDS
- Please read this instruction manual carefully before use.
- Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
- For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
- Do not use outdoors or in damp area.
- Always unplug the appliance from the power supply before cleaning and when not in use.
- To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
- Do not spray aerosol products when the hair dryer is in operation.
- Do not leave the appliance switched on when you do not use it.
- Do not use other attachments than those supplied.
- Never carry or suspend the appliance by the cord.
- Keep the cord away from sharp edges and hot surfaces.
- IMPORTANT:
- Keep your hair away from the immediate vicinity of the air inlet opening. Keep the air inlet filter dust and fluff free.
- Do not cover air inlet or air outlet otherwise the hair dryer may overheat.
- The attachments become hot during operation.
- If the appliance is used in a bathroom, it should always be unplugged after use, because nearness of water is dangerous even if the appliance is switched off.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
- The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
- Children must be under control in order not to be allowed to play with the appliance.
- In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
ATTENTION:
Do not use the device beside the bathrooms, swimming pools and other vessels
containing water.
- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
- Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production.
INSTRUCTION FOR USE
-
The device is designed for drying and styling hair
-
Fully unwind the cord.
-
Attach a nozzle.
-
Insert the plug into the power supply.
-
Select the desired speed (heating mode) using the II speeds (3 heat settings) switch.
-
SPEED CONTROL
- off;
- medium speed for delicate drying and styling;
- high speed for quick drying and styling.
-
HEAT SETTINGS
-
* cold airflow;
- medium temperature for gentle drying and shaping;
- the high temperature for rapid drying.
-
IMPORTANT : Airflow speed will be increased automatically after increasing the airflow temperature.
CONCENTRATOR
- The air concentrator is for bundling and directing the airflow for selective drying.
IONISATION FUNCTION
- Ions which the hair dryer generates automatically, neutralize static electricity that sometimes appears in the hair while drying it. Besides, this technology enhances the effect of hair products: the hair becomes smoother, softer and more shining.
COOL SHOT
- This appliance is featured with “COOL SHOT” function for hair style fixing. To turn on the mode, move the mode button to the right; to turn it off, move it to the left.
CARE AND CLEANING
- Switch off the appliance, unplug it from the power supply and allow to cool fully.
- Take off the air openings grid from the device to remove hair and dust.
- Clean the device with a damp cloth.
- Do not use abrasive cleaners.
- Periodically remove the air-inlet removable lattice and clean it with a brush, then put the air-inlet removable lattice in place.
STORAGE
- Ensure that the hair dryer is completely cool and dry.
- Do not wrap the cord around the appliane, as this may cause damage.
- Keep the appliance in a cool, dry place.
The symbol on the unit, packing materials and/or documentation means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.
For additional information about actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>