NUTRiBULLET N12-1001 Pro Plus Single Speed Blender User Guide
- June 13, 2024
- nutribullet
Table of Contents
NUTRiBULLET N12-1001 Pro Plus Single Speed Blender
Product Information
This product is a 10-piece set that includes the following:
- 1 x 32-OZ Colossal Cup
- 1 x Extractor Blade (It is recommended to replace the extractor blade every 6 months or as needed for optimal performance)
- 2 x Comfort Lip Rings
- 1 x 24-OZ Tall Cup
- 1 x High-Torque Power Base
- 1 x User Guide & Recipe Book
- 1 x Pocket Nutritionist
- 2 x Flip-Top Lids
Product Usage Instructions
- Add Ingredients:
- Fill the vessel with ingredients, making sure not to exceed the MAX line.
- Attach Blade:
- Twist on the Extractor Blade and tighten it by hand to ensure the vessel is sealed.
- Pulse Mode:
- To pulse, push and twist the vessel onto the Power Base.
- Quickly press the Pulse Button to start the motor, and release the button to stop the blades.
- Let the blades come to a complete stop after each pulse and press the button again until you achieve the desired consistency.
- The Pulse Button will flash GREEN when in Pulse Mode.
- Blend Mode:
- Push the assembly down, pressing the Activator Tabs onto the Activator Buttons.
- Gently rotate the vessel to lock the unit into place.
- The Power Base will automatically stop blending, allowing you to keep your hands free.
- Ready to Enjoy:
- Your perfectly blended treat is now ready to be enjoyed!
WHAT’S INCLUDED
HOW IT WORKS
BLEND MODE
- Add Ingredients: Fill room temperature ingredients (20°C/70°F or less) into an included vessel without exceeding the MAX line.
- Attach Blade: Twist on Extractor Blade and tighten by hand to make sure vessel is sealed.
- Push & Twist: Push assembly down, pressing Activator Tabs onto the Activator Buttons. Gently rotate the vessel to lock the unit into place.
- Blend in Progress: The Power Base will automatically stop blending, so you can keep your hands free!
- Ready to Enjoy: Your perfectly blended treat awaits!
PULSE MODE
- To Pulse, push and twist the vessel onto the Power Base then quickly press the Pulse Button, stopping the motor.
- The Pulse Button will flash GREEN now that it’s in Pulse Mode.
- Press and hold the Pulse Button to make the Blades turn. Release the Button to stop the blades. Let the Blades come to a complete stop after each Pulse and press the button again until you get the consistency you desire.
Start slow at first, until you become a Pro!
For recipes, see the NutriBullet® User Guide, the NutriBullet® app and
NutriLiving.com
NUTRIBULLET is a registered trademark of CAPBRAN HOLDINGS, LLC. Copyright ©
2018 CAPBRAN HOLDINGS, LLC. LOS ANGELES, CA 90025, USA. ALL RIGHTS RESERVED.
MADE IN CHINA.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>