TOPARC YY-320 Masque Antiprojection Mask Anti Blasting Anti Fogging Instruction Manual

TOPARC YY-320 Masque Antiprojection Mask Anti Blasting Anti Fogging

SAFETY RULES

Read these instructions of use carefully before use!

• Always wear safety goggles at work.

• Use the protective plastic bag to store the goggles.

• To extend the lifetime of these protective goggles, keep them in a cool and dry place, inspecting them regularly for scratches, cracks and other damage to lenses. Proper use and maintenance will ensure prolonged use of the goggles. Replace damaged glasses with new ones.

• After use, clean the goggles with cloth and mild detergent. Do not use any chemical cleaning substances.

• These safety goggles are designed to protect the user’s eye from accelerated chips and particles. The glass element of the goggles withholds the impact of 44-gram steel ball accelerated to5.2 m/s.

• Optic class3 glass is not designed for prolonged use.

• The sides of safety goggles come into contact with skin. The material they are made of may interact with chemical
  substances and cause allergic reaction in persons prone to allergies.

• Coloured glass protects eyes only from “simple” UV rays. Coloured and translucent glass does not protect against optic radiation during welding, etc.

• Coloured glass is not designed for work at dusk/dawn or at night.

• Coloured glass is not designed for looking directly into the sun.

• Do not use goggles with damaged frame.

• Do not use goggles that are scratched, cracked or whose transparency does not improve even after cleaning.

• Periodically replace safety goggles with new ones.

• Do not modify the goggles in any way.

• Keep these lnstructions of use for future reference.

• If protection against particles thrown at high speed at extreme temperatures is required, then the eye protector chosen should be marked with the letter T immediately following the impact letter, i. e. FT, BT or AT. If the impact letter is not followed by the letter T, then the eye protector should only be used against particles thrown at high speed at room temperature.

• If the symbols F, B and A are not common to the eyepiece and frame, then the lowest level must be considered as the overall protection level of the glasses.

• Do not wear these protective glasses over eye glasses. This can be the source of danger in case of contact with a particle launched at high speed.

For your safety

• To avoid accidents, always use certified goggles.
• Also use other appropriate personal protection equipment.
• Keep your workplace clean and tidy.
• Follow the safety instructions and work methods.

Standards and Approval

These safety spectacles are classed as Personal Protective Equipment (PPE) by the European PPE new regulation (EU) 2016/425 and have been shown to comply with this regulation through the Harmonized European Standard EN166:2001:
SAFETY SPECTACLES.

lnstructions of use

Adjust the safety goggles to fit comfortably and cover the eyes. When used properly, the safety goggles will provide the required protection for 2 to 3 years.

Maintenance

• Clean the goggles in warm water(ambient temperature) and use a mild detergent. Do not use hot water or solvents.
• After cleaning, wipe with soft cloth. Never use any abrasive cloth or substances and do not dry the goggles near heat sources.
• lf needed, add small amount of disinfectant to the cleaning liquid. Follow the instructions of the producer of the disinfecting substance

Storage

• Store the protective goggles in original packaging and do not put any other objects on top of it.
• Store the protective goggles in dry and ventilated place, away from direct sunlight and chemical substances

Marking

FRAME : CE ZX EN 166 S
GLASS : CE ZX 1 S
Model No.: YY-320
Manufacturer’s identification : ZX
European standard number : EN166
Impact resistance : S (Reinforced strength)
XX/XX : Batch number

SYMBOLS

| Device complies with Europeans directives
---|---
| Equipment in compliance with British requirements
| This product should be recycled appropriately

CUSTOMER SUPPORT

JBDC
1, rue de la Croix des Landes
CS 54159
53941 SAINT-BERTHEVIN Cedex
FRANCE
Manufacturer issued information

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>