BOSCH SPV4EMX62E Fully Integrated Built In Dishwasher Instruction Manual
- June 1, 2024
- Bosch
Table of Contents
BOSCH SPV4EMX62E Fully Integrated Built In Dishwasher
Specifications
| Component | Specification |
|---|---|
| Mat.-Nr. | 10011641 |
| Mat.-Nr. | 12022522 |
| Mat.-Nr. | 00350564 |
| Size Range | 0 – 60 mm |
| Tool Size | Torx T 20 |
| Wrench Sizes | SW 13, SW 10 |
| Minimum Distance | min. 70 mm |
| Maximum Distance | max. 120 mm |
| Maximum Length | max 1,1 m |
| Minimum Length | min. 280 mm |
Assembly Steps
- Align the components without pinching or bending (indicated as “nicht einklemmen do not pinch ne pas coincer No doblar”).
- Use the Torx T 20 tool to brace the assembly as shown in the diagrams.
- Ensure that the distance between components is within the specified range of 70 mm to 120 mm.
- For components requiring vertical bracing (“verspannen brace calar verticalement Enrasar”), use the SW 13 and SW 10 wrenches as indicated.
- If a disc must be removed (“Scheibe entfernen remove disc enlever le disque Eliminar Disco”), do so as depicted in the diagrams.
- After assembly, verify the integrity of the structure and check for leaks after one wash cycle (“Check for leaks after one wash cycle. Verificar la estanquiedad tras un ciclo de lavado.”).
FAQ
-
What is the purpose of the Torx T 20 tool in the assembly?
The Torx T 20 is used for bracing components during assembly to ensure they are securely fastened. -
What should be checked after the assembly is completed?
It is important to check for leaks after one wash cycle to ensure the integrity of the assembly. -
How do I know if the components are properly aligned?
Components should be aligned without pinching or bending, and distances should be within the specified range of 70 mm to 120 mm. -
What should I do if the distance between components is greater than 120 mm?
Adjust the components to ensure the distance does not exceed the maximum of 120 mm for proper assembly. -
How do I remove a disc if required?
Follow the diagrams provided to remove the disc safely without damaging the components.
INSTALLATION INSTRUCTION
