OVELBLFFSBB Fully Fitted Electric Blanket User Guide

OVELBLFFSBB Fully Fitted Electric Blanket

SAFETY & WARNINGS

• Read all instructions before use and retain this user guide for future reference.
• Only use this electric blanket as an under blanket.
• Secure the electric blanket to the bed before use.
• Do not attempt to repair this electric blanket yourself. If this electric blanket or its power cord is damaged, cease use immediately and contact help.Kogan.com for support.
• Do not use this electric blanket tucked in, folded, bunched up, or creased.
• Do not use this electric blanket if it is wet or damp.
• Do not use this electric blanket with the elements or wires tucked in.
• Do not insert needles or pins into the electric blanket.
• Do not use the electric blanket with infants, pets, or persons insensitive to heat.
• Do not wash or cover the controller.
• Do not immerse the controller, power cord, or plug in any liquid.
• This electric blanket is not recommended for overnight use.
• This electric blanket should not be used by very young children (0-3 years).
• It is recommended that this electric blanket be used with a residual current safety device (safety switch) with a rated residual operating current not exceeding 30mA.
• Do not use any other controller with this electric blanket.
• This electric blanket is an under blanket designed to be placed directly on top of your mattress and dressed in a fitted or flat sheet.

Before Fitting the Electric Blanket

• Before fitting the electric blanket for the first time, check all components for visible signs of damage.
• Do not fit the electric blanket under or over a mattress protector or topper. The electric blanket should not be used with a waterproof mattress protector.
• Ensure that the heating area (wire element) on any side of the bed does not hang over the edge of the mattress. Do not tuck the electric blanket under your mattress.
• Do not use this electric blanket over or under a waterbed.
• This electric blanket is not recommended for use on an adjustable bed such as a sofa bed, inflatable bed, or futon. If you’re using it on an adjustable bed, make sure the electric blanket and power cord do not become trapped, bunched up, or folded.

Maintaining the Electric Blanket

• Do not crease the electric blanket, as this can damage the wiring.
• Make sure the electric blanket is completely dry before turning it on. Never use the electric blanket wet.
• Allow the electric blanket to cool down before folding and storing. Avoid pressing creases into the electric blanket. Always store indoors and where no other objects will be placed on top.
• Only clean this electric blanket according to the instructions in this user guide.

Conditions & Restrictions

• Electric blankets are designed to pre-heat indoor beds. Do not use it for anything else and do not use it outdoors.
• This electric blanket is designed for domestic use only and is not suitable for commercial use such as in hospitals or hotels.
• Do not use this electric blanket with babies and toddlers.
• This electric blanket is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure they do not play with the electric blanket.
• Keep the electric blanket away from pets. Do not allow animals to lie on or chew the electric blanket or power cord.
• Do not to use a hot water bottle whilst using the electric blanket.
• Avoid extended use of this electric blanket at high settings as a build-up of heat could cause overheating of the body (heatstroke), irritations or burns on the skin.
• Slide the power switch to the off position and unplug the power cord when not in use.
• Ensure nothing heavy is placed on the electric blanket while it is switched on.
• Keep controllers away from external sources of heat, e.g. heater, fireplace, naked flame, etc.

Electrical Safety

• Before connecting the electric blanket, ensure your outlet voltage and circuit frequency correspond to the voltage stated on the rating label.

• To protect against fire and electric shock, do not immerse the cord, plug or controller in water or other liquid. Never switch on the electric blanket if it is moist or wet. Do not operate the electric blanket with wet hands. Allow the electric blanket to dry completely before using it. Keep the controller away from open windows.

• Do not use a dryer or heater to dry the electric blanket.

• Only ever use the provided power cord and controllers.

• Do not use the electric blanket with an extension cord unless this extension cord has been checked and tested by a qualified electrician.

• Do not stretch, roll, fold or kink the power cord.

• Do not let the controllers overheat. Never tuck them underneath your pillow or electric blankets.

• Switch off the electrical outlet and remove the plug when the electric blanket is not in use. Do not pull on the power cord, only pull the plug.

• For additional protection, it is strongly recommended that a residual current device
  (safety switch) with a rated residual operating current not exceeding 30mA is used on the circuit supplying power to this product. See your electrician for professional advice.

• Check the electric blanket, controllers, and cords regularly for damage. If the electric blanket is damaged, cease use immediately and contact help.Kogan.com for support.

• Use a clean cloth to thoroughly dry the controller and allow the entire electric blanket to air dry completely before plugging it back in. Do not use a dryer or heater to dry the electric blanket.

• On dual controller models, users can control their own side of the bed with individual controllers. Each side of the electric blanket has a separate element powered with its own power cord. Preferably, the two power cords should be plugged into different electrical outlets.

• If there is a rapid temperature rise high enough to constitute a hazard, the overheat system will intervene by cutting off the power before the temperature reaches the point where damage may occur. In the event of the overheat system operating, the electric blanket will turn off. Should this happen, stop using the electric blanket and disconnect it from power.

• To avoid a hazard due to inadvertent resetting of the thermal cut-out, this electric blanket must not be powered by an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off.

OPERATION

Fitting the Electric Blanket
To make sure your electric blanket works properly and retains heat efficiently, it must be fitted securely to the mattress so it can’t move around or crease.

1. Remove your fitted or flat sheet.
2. Unfold the electric blanket fully and lay it flat on the bare mattress.
3. Position the electric blanket so the power cord is at the head of the bed.
4. Use the fitted skirt to secure the electric blanket to your mattress, passing the skirt underneath to secure in place.
5. When the electric blanket is fitted snuggly to the mattress, connect the controller connector to the electric blanket socket. To detach the controller from the electric blanket, lift the flap on the electric blanket socket and pull gently.

WARNING : Do not pull the controller’s power cord or plug without lifting the flap as this will damage the socket.

Notes:

• Do not use a mattress topper with this electric blanket.
• Check the electric blanket regularly to ensure it’s still fitting snuggly without creases and that the power cord and controllers are still connected.
• Do not stretch, fold, roll or kink the power cord. Allow the power cord to hang freely. Do not allow the cords to become trapped under the mattress or bed layers, as this could damage the cords.

Before Use
Before you turn the electric blanket on and use it, ensure that:

• The power cord and controllers are uncovered.
• The power cord and controller connectors are firmly and securely connected to the electric blanket’s sockets.
• The electric blanket is fully unfolded. It is not safe to use when folded.
• The electric blanket fits snuggly over your mattress so creases can’t easily form, but it is not stretched too tightly.
• Once you have fitted your electric blanket, plug it in to an electrical outlet near the head of the bed. Ensure that the cord is not stretched. Safely use an appropriate extension cord if necessary.

Power
Slide the Power switch down to turn the electric blanket on, and up to turn it off. The power indicator will illuminate when the electric blanket is on.

Temperature

• Repeatedly press the Temperature button to adjust the temperature level from 1-5 (low to high). The selected level will illuminate on the display screen.
• After 3 hours on level 4 or 5, the electric blanket will automatically switch back to level 3 to prevent overheating.
• To pre-heat your bed, it is recommended to set the controller to level 3 for 30 minutes before sleeping in the bed. The electric blanket will warm the bed if it is covered with a sheet and quilt or blanket.
• Once the bed has warmed up to the desired temperature, turn the electric blanket off or leave the electric blanket on for a longer period on a lower heat setting.
• It is recommended you turn the electric blanket off whilst sleeping. Do not sleep with the controller set to a high heat.

Time

• Repeatedly press the Time button to set the timer to 1-10 hours. The time indicators will illuminate on the display screen to the sum of the total time.
• The electric blanket will automatically switch off after the set time has passed.

Cancel
Press the Cancel button to cancel the timer and the temperature. The electric blanket will stop heating until the temperature and timer are reset.

CLEANING & CARE

Washing

• It is recommended to only wash the electric blanket in extreme circumstances or where the electric blanket becomes soiled.

• The electric blanket can be washed by hand or in the washing machine on a 30°C wool/gentle cycle.

• Before washing the electric blanket, detach the controllers from the electric blanket’s sockets and ensure the controllers do not get wet.

• To hand wash, fill a large bowl or bath with cold water and mild washing powder or detergent. Leave the electric blanket to soak for 5 minutes, then gently rinse in clean water until the water runs clear.

• To machine wash, place the electric blanket in the washing machine on a 30°C
  wool/gentle cycle. Never use a spin cycle. Do not wring the electric blanket out. Gently but firmly squeeze out excess water.

• Do not bleach the electric blanket or use detergent with bleach.

• Do not dry clean this electric blanket.

• Never use the electric blanket before it has fully dried. This is extremely dangerous.

Drying

• Reshape the electric blanket and gently tease it back to size while it’s damp.
• If you are hanging it on the washing line to dry, ensure it is laid over several lines. Do not peg any of the wired areas as this could damage them.
• Always make sure the electric blanket is completely dry before you use it.
• Do not tumble dry or iron this electric blanket.
• Do not dry the electric blanket with a hair dryer or heater.
• Ensure the electric blanket is completely dry before reconnecting the controller and using the electric blanket.
• Do not switch the electric blanket on when it is still wet to dry it faster.

Storage

• When not in use for an extended period, it is recommended to store the electric blanket.
• Turn the electric blanket off, allow it to cool down and then roll or loosely fold it up. Do not fold tightly or put heavy items on top. Deep creases could form, which could damage the wiring.
• It is recommended that you keep the original packaging for storing the electric blanket when it is not in use.

Regular Wear and Tear Checks

• Ensure the plugs, power cord, electric blanket sockets and controllers are safe and undamaged with no bare wire showing.
• Ensure the wiring of the electric blanket is not protruding through the fabric.
• Straighten out any wires that have looped or twisted. Hold the electric blanket up to a window or light to check.
• If there are any signs of wear or damage or if the electric blanket has been misused or appears to not work, contact help.Kogan.com before turning it on.
• If the power cord is damaged, cease use immediately and contact help.Kogan.com.

Disposal
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>