Kr ger Matz KM0771 Wireless Controller Owner’s Manual

: June 5, 2024
: Kr ger Matz

Table of Contents

KM0771 Wireless Controller
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KM0771 Wireless Controller

Owner’s Manual

SAFETY INSTRUCTIONS

Read this instruction manual and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

Protect this device from extreme temperatures, sources
of heat and direct sunlight. Do not expose the device to
water or humidity nor install near strong magnetic field.
Do not handle this device with wet hands.
It is suggested not to consume meals or drink during
using the device. Food leftovers getting under the
buttons may cause problems with operation or damage
the device.
Do not use this device if it has been damaged.
Prevent the device from falling on the ground or being
strongly impacted.
Producer does not claim liability for any damage caused
by inappropriate use and handling or any mechanical
damage.
Producer does not guarantee compatibility with every
external device.
Do not disassemble nor repair this device yourself. The
device has no user serviceable parts inside. In case of
damage, contact authorized service point for check-up
or repair.
Clean the device with a soft, slightly damp cloth. Do not
use any chemical agents to clean this device.

PRODUCT DESCRIPTION

D-pad
L1, L2 buttons
SHARE button
Touch panel
OPTIONS button
R1, R2 buttons
Function buttons
Analog sticks
Speaker
HOME button
Earphone jack
EXT socket
Charging socket
Light bar
Reset button

OPERATION

Pairing
PS4
Before pairing, make sure to reset the controller. Insert a
small, thin object (ex. paperclip) to the Reset button slot,
and press and hold it for 5 seconds.
1. Connect the controller with a microUSB cable to the
USB port on the console.
2. Press the HOME button on the controller.
3. After a while, the light bar will start to glow blue. Now
USB cable can be disconnected.

PC
Connection with a PC requires a Bluetooth adapter in 2.0
version or higher. Range of the controller depends on the
adapter, Bluetooth version and obstacles between the
controller and adapter.
1. In Windows 10, go to the Settings menu.
2. Go to the Devices menu.
3. Press the Add Bluetooth device button, and select the
Bluetooth option.
4. Press and hold the HOME and SHARE buttons at the
same time, until the light bar starts to flash.
5. After a while, the PC will find the controller. Select the
Wireless controller.
6. After a while, the connection will be established.
Attention: Touch panel, light bar, speaker and audio-jack
output may not work on all platforms.

Tips:

In the Steam app, pressing the HOME button will open
up Big Picture mode.
To turn off the controller, press and hold the HOME
button for 10 seconds.

SPECIFICATION

Compatibility: PC, PS4
Communication: Bluetooth
Dual shock 4 button layout
Vibration function
Light bar
Touch panel
3,5 mm audio-jack output
Accessories input (EXT)
Mono speaker
Charging socket: microUSB
Charging: 5 V / 0,3 A
Battery: lithium-ion / 600 mAh
Working temperature: 5°C ~ 35°C
Dimensions: 160 x 104 x 60 mm
Weight: 200 g

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with
separate collection systems) This marking shown on the product or its
literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact
either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.