SKS BIL 20 Socket Instructions
- June 1, 2024
- SKS
Table of Contents
SKS BIL 20 Socket
Specifications
-
Product: BIL 20 Socket
-
Description: Socket with insulated head and ring for
installation in equipment chassis and switch panels with a wall
thickness up to 2 mm. -
Socket Diameter: 4 mm
-
Material: Tinplated zinc die-cast
-
Connection: Solder connection and M6 thread
-
Rated Voltage: 30 VAC / 60 VDC
-
Rated Current: 32 A
-
Housing Material: PA (Polyamide)
-
Inflammability Class: V-2 (UL 94 standard)
Installation
- Ensure the equipment chassis or switch panel has a wall thickness of up to 2 mm.
- Insert the BIL 20 Socket into the designated slot.
- Secure the socket using the M6 thread provided.
- Solder the connections carefully to ensure a secure electrical connection.
Connection
Connect the relevant wires to the solder connections on the socket. Ensure
proper insulation and secure connections.
Safety Precautions
- Always disconnect power before installing or working on the socket.
- Do not exceed the rated voltage and current limits specified.
- Follow proper electrical safety procedures during installation.
FAQ
Q: What is the maximum wall thickness the BIL 20 Socket can be installed
in?
A: The socket is designed for wall thicknesses up to 2 mm.
Sockets
BIL 20
- contact the manufacturer for applications at deviating temperature ranges
- without rated measurement category, for other circuits that are not directly connected to mains stand: 24.08.2022
SKS Kontakttechnik GmbH | Neue Schichtstraße 14 | D-09366 Niederdorf | Phone +49-37296-930-300 | Fax +49 37296-930-301 | www.sks-kontakt.de | info@sks-kontakt.de
Downloaded from Arrow.com