Shenzhen YouXG Technology Co Ltd YW08 Wireless Charger User Manual
- June 1, 2024
- Shenzhen YouXG Technology Co Ltd
Table of Contents
Shenzhen YouXG Technology Co Ltd YW08 Wireless Charger User Manual
Wireless Charger
Model: YW08
Forward
Dear users, thank you for purchasing our products. In order to further understand the product, please read this manual carefully before use. Wish you a happy experience!
Product parts and descriptions
Folding Storage
Instructions for use
- Turn on the power, the product enters the standby state, the wireless charger lights up blue;
- Charge your wireless charging device by placing it in the wireless induction area with the wireless charging magnetic suction function;
- Charge your AirPod by placing it in the wireless charging zone;
- Open the headphone storage slot, put the watch in the watch charging position, wireless charging, touch the night light On/Off key, the night light lights up yellow;
- After charging, remove the watch, fold it upwards into the card slot, disconnect the power supply and organize the product for storage;
Frequently Asked Questions
- Why do wireless charging and induction products generate heat when charging?
- During the charging process, there will be a certain loss of magnetoelectric conversion, and this part of the loss will be converted into heat, It is normal for the phone and charger to generate heat.
Suggestion:
- When the device is fully charged, please disconnect the charging in time to avoid long-term cycle charging, resulting in The product and charger continue to heat up;
- When the mobile phone is charging, please close the mobile phone background software to run the software.
Precautions
- It can only be used indoors or in a dry environment, and avoid placing or using it in an environment with high temperature, humidity, strong static electricity and strong magnetic fields;
- For your safety, please do not plug and unplug electrical appliances with wet hands;
- Keep out of reach of babies and children;
- Do not use if the product gets into water or is stuck with dirt or dust;
Non-professionals are not allowed to disassemble and repair without authorization.
Product Parameters
Input: 5V-2A 9V-2A 12V-2A QC30
PD cell phone output power: 15W/10W/7.5W/5W
Watch output power: 2.5W
Headphone output: 5W
Charging distance: 3mm-10mm
Charging efficiency: 75%
Operating frequency: 100-205KHZ
Material: ABS+Rubber ball+ Aluminum alloy+PC lens
Color: black, white
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Expo
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.