Weier WR889 Bluetooth Keyboard Instructions

Weier WR889 Bluetooth Keyboard

Keyboard instruction (US/UK)

Please read the instructions carefully before use

Bluetooth keyboard case connection operation:

1. Turn on the power,The indicator light is on for 1~3 seconds
   Press the matching key “ ” for 1 second, the Wireless indicator lights flicker into the pairing state, and the effective time is about 120 seconds.
   Open the Wireless search function of the external device, click the “Wireless Keyboard” searched.
   After the pairing is successful, the indicator lights go out, and you can use the keyboard.

2. If it is not in use for 10 minutes, the keyboard will enter auto sleep mode. Please press any keys to wake it up in 2-3 seconds.

Disconnect The Keyboard Connection

If you want to break the connection between keyboard and device, please clear the pairing information in the device, or turn off the keyboard power directly.

Electricity Indicator

• If the power indicator light is red slowly, the power is low, please charge it in time, the red light is bright when charging. When the indicator is green, it is full, please disconnect the charging power to ensure safety.

Please refer to the following instructions according to the actual functions of the purchased products : (Partial product support)

| WINDOWS| IOS| ANDROID
---|---|---|---
| | | Back To Home
| | | Virtual Keyboard
| | | Change Input Method
| | | Screenshots
| | | Screen Brightness Down
| | | Screen Brightness Up
| | | Back
| | | Play/Pause
| | | Forward
| | | Mute
| | | Volume Down
| | | Volume Up
| | | Lock Screen
| | | Lock/Unlock Trackpad
| | | Cut
| | | Copy
| | | Paste
| | | Searching
|

Touch The Mouse

please refer to the actual situation of the product.

Single finger slipping

Double finger sliding

Double finger scaling
Not supported on all Android tablets)

 How to adjust the backlit keys

By pressing “Fn+ ” can (turn on/Adjust the brightness/turn off) the luminous function of the keyboard.
If in the off state, press to turn on the luminescence, then press the brightness to increase 20%, then press the brightness to increase 20% again, then press again to turn off the luminescence; Loop through.

FN+ can adjust the luminous color, and switch between different colors in turn.

Note:

If the light can not be lit, or immediately after the light off, please timely charge; If the battery capacity is below 20%, the keyboard will force this function off..

Hot key: Press Fn key and hot key together to activate action.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Basic parameters (part of the parameters are objective factors will

vary).

280mAh(No backlit)
Keyboard Lifetime:| 300 Millions Times| Charge Input:| 5V, 500mA
Connect Distance:| 10m| Charging Time:| 2~3 Hours
Charging Current:| 150~300mA| Awaken Time:| 2~3 Seconds
Charging Port:| TYPE-C| Working Temperature:| -10°C~+55°C
Matching Password:| No| Keystrokes:| 50g~70g
Low Voltage Alert:| 3.0~3.3V| |

Maintenance and warning

• Do not squeeze or twist, clap the keyboard.
• Do not scan the microwave and get away from the magnetic field.
• Away from the liquid and used in a dry environment.
• Clean the keyboard with soft cloth, do not turn off the power for a long time.
• Other routine maintenance of electronic products.

Common connection Troubleshooting

• Make sure the power is turned on and the battery is sufficient.
• Make sure that the keyboard is within the range of working distance.
• Make sure that the Wireless related function of the device has been opened.
• Make sure that the keyboard and the device have been paired.
• Clear device pairing record and turn off Wireless function; re match.
• Please do not connect multiple Bluetooth keyboards at the same time; if necessary, please connect one by one.

This product will not be updated in time for continuous product improvement. If there is any discrepancy, please refer to physical products.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>